#!/usr/bin/env bash
# Copyright 2018 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Tests of the bazel client.

# Disable the package loader sanity check since many of these tests use fifos
# for controlling access to BUILD files. (This only has an effect at Google.)
export DONT_SANITY_CHECK_WITH_PACKAGE_LOADER=1

CURRENT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
source "${CURRENT_DIR}/../integration_test_setup.sh" \
  || { echo "integration_test_setup.sh not found!" >&2; exit 1; }

function strip_lines_from_bazel_cc() {
  # sed can't redirect back to its input file (it'll only generate an empty
  # file). In newer versions of gnu sed there is a -i option to edit in place.

  # Ignore common warnings caused by the environment on our CI workers.
  clean_log=$(\
    sed \
    -e '/^WARNING: ignoring JAVA_TOOL_OPTIONS in environment.$/d' \
    -e '/^\.\.\. still trying to connect to local B[azel]* server ([1-9][0-9]*) after [1-9][0-9]* seconds \.\.\.\.*$/d' \
    $TEST_log)

  echo "$clean_log" > $TEST_log
}

#### TESTS #############################################################

function test_client_debug() {
  # Test that --client_debug sends log statements to stderr.
  bazel --client_debug version >&$TEST_log || fail "'bazel version' failed"
  expect_log "Debug logging requested"
  bazel --client_debug --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_log "Debug logging requested"

  # Test that --client_debug can be disabled
  bazel --noclient_debug version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
  bazel --noclient_debug --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"

  # Test that --client_debug is off by default.
  bazel --ignore_all_rc_files version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
  bazel  --ignore_all_rc_files --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
}

function test_client_debug_change_does_not_restart_server() {
  local server_pid1=$(bazel --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel --noclient_debug info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_server_restart_due_to_startup_options() {
  local server_pid1=$(bazel --idle_server_tasks info server_pid 2>$TEST_log)
  local server_pid2=$(bazel --noidle_server_tasks info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2" # pid changed.
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_multiple_requests_same_server() {
  local server_pid1=$(bazel info server_pid 2>$TEST_log)
  local server_pid2=$(bazel info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_no_server_restart_if_options_order_changes() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dbar \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dbar \
                      --host_jvm_args=-Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_server_restart_if_number_of_option_instances_increases() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args -Dfoo \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the current request that were not included when creating the server:"
  expect_log "\\[INFO .*\\]   --host_jvm_args=-Dfoo"
}

function test_server_restart_if_number_of_option_instances_decreases() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the running server that are not included in the current request:"
  expect_log "\\[INFO .*\\]   --host_jvm_args=-Dfoo"
}

function test_server_not_restarted_when_only_TMPDIR_changes() {
  mkdir tmp1
  mkdir tmp2
  tmp1path="$(pwd)/tmp1"
  tmp2path="$(pwd)/tmp2"
  PID1=$(export TMPDIR="$tmp1path" && bazel info server_pid 2>$TEST_log) \
     || fail "bazel info failed"
  PID2=$(export TMPDIR="$tmp2path" && bazel info server_pid 2>$TEST_log) \
     || fail "bazel info failed"
  expect_not_log "Running B\\(azel\\|laze\\) server needs to be killed."

  assert_equals "$PID1" "$PID2"
}

function test_server_restarted_on_explicit_heap_dump_path_change() {
  mkdir tmp1
  mkdir tmp2
  tmp1path="$(pwd)/tmp1"
  tmp2path="$(pwd)/tmp2"
  PID1=$(bazel --host_jvm_args=-XX:HeapDumpPath="$tmp1path" info server_pid \
     2>$TEST_log) || fail "bazel info failed"
  PID2=$(bazel --host_jvm_args=-XX:HeapDumpPath="$tmp2path" info server_pid \
     2>$TEST_log) || fail "bazel info failed"
  expect_log "Running B\\(azel\\|laze\\) server needs to be killed."

  assert_not_equals "$PID1" "$PID2"
}

function test_shutdown() {
  local server_pid1=$(bazel info server_pid 2>$TEST_log)
  bazel shutdown >& $TEST_log || fail "Expected success"
  local server_pid2=$(bazel info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "Starting local B\\(azel\\|laze\\) server (.*) and connecting to it"
}

function test_shutdown_different_options() {
  bazel --host_jvm_args=-Di.am.a=teapot info >& $TEST_log || fail "Expected success"
  bazel shutdown >& $TEST_log || fail "Expected success"
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
  expect_not_log "Starting local B\\(azel\\|laze\\) server (.*) and connecting to it"
}

function test_server_restart_due_to_startup_options_with_client_debug_information() {
  # Using --write_command_log for no particular reason, if that flag is removed, another startup
  # option will do just fine.
  local server_pid1=$(bazel --client_debug --idle_server_tasks info server_pid 2>$TEST_log)
  local server_pid2=$(bazel --client_debug --noidle_server_tasks info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2" # pid changed.
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the running server that are not included in the current request:"
  expect_log "\\[INFO .*\\]   --idle_server_tasks"
  expect_log "\\[INFO .*\\] Args from the current request that were not included when creating the server:"
  expect_log "\\[INFO .*\\]   --noidle_server_tasks"
}

function test_exit_code() {
  bazel query not_a_query >/dev/null &>$TEST_log &&
      fail "bazel query: expected nonzero exit"
  expect_log "'not_a_query'"
}

function test_output_base() {
  out=$(bazel --output_base=$TEST_TMPDIR/output info output_base 2>$TEST_log)
  assert_equals $TEST_TMPDIR/output "$out"
}

function test_output_base_is_file() {
  bazel --output_base=/dev/null &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/dev/null' could not be created.*exists"
}

function test_cannot_create_output_base() {
  bazel --output_base=/foo &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/foo' could not be created"
}

function test_nonwritable_output_base() {
  bazel --output_base=/ &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/' must be readable and writable."
}

function test_install_base_races_dont_leave_temp_files() {
  declare -a client_pids
  for i in {1..3}; do
    bazel --install_base="$TEST_TMPDIR/race/install" \
        --output_base="$TEST_TMPDIR/out$i" info install_base &
    client_pids+=($!)
  done
  for pid in "${client_pids[@]}"; do
    wait $pid
  done
  # Expect the "race" directory to contain only "install" and "install.lock".
  for filename in $(ls "$TEST_TMPDIR/race/"); do
    assert_one_of install install.lock "$filename"
  done
}

# Regression test for b/1295038.
function test_install_base_corrupted_by_deleted_file() {
  local -r install_base="$TEST_TMPDIR/corrupted_install_base"

  bazel --install_base="$install_base" shutdown || fail "Expected success"

  rm "$install_base/process-wrapper"

  bazel --install_base="$install_base" >& $TEST_log || fail "Expected success"
  expect_log "Corrupt installation: file '.*process-wrapper' is missing or modified."
  expect_log "Removing previous installation."
  local capitalized_product_name="$(echo "$PRODUCT_NAME" | awk '{print toupper(substr($0,1,1)) substr($0,2)}')"
  expect_log "Extracting $capitalized_product_name installation..."
  expect_log "Usage: $PRODUCT_NAME"  # phew
}

function test_install_base_corrupted_by_touched_file() {
  local -r install_base="$TEST_TMPDIR/corrupted_install_base"

  bazel --install_base="$install_base" shutdown || fail "Expected success"

  touch "$install_base/process-wrapper"

  bazel --install_base="$install_base" >&$TEST_log || fail "Expected success"
  expect_log "Corrupt installation: file '.*process-wrapper' is missing or modified."
  expect_log "Removing previous installation."
  local capitalized_product_name="$(echo "$PRODUCT_NAME" | awk '{print toupper(substr($0,1,1)) substr($0,2)}')"
  expect_log "Extracting $capitalized_product_name installation..."
  expect_log "Usage: $PRODUCT_NAME"  # phew
}

# Regression test for b/380443969.
function test_readonly_install_base() {
  local -r install_base_parent="$TEST_TMPDIR/install_base_parent"
  local -r install_base="$install_base_parent/install_base"

  mkdir -p "$install_base_parent" || fail "mkdir failed"

  # First install ourselves.
  bazel --install_base="$install_base" shutdown || fail "Expected success"

  # Make the install base deeply read-only, including its parent directory.
  chmod -R a-w "$install_base_parent" || fail "chmod failed"

  # Check that we're still able to run.
  bazel --install_base="$install_base" shutdown || fail "Expected success"
}

function test_output_user_root() {
  # Test absolute path
  bazel --output_user_root=$TEST_TMPDIR/user info output_base >& $TEST_log \
      || fail "Expected success"
  expect_log "$TEST_TMPDIR/user/[0-9a-f]\{32\}"

  # Test relative path
  bazel --output_user_root=../user info output_base >& $TEST_log \
      || fail "Expected success"
  expect_log "$(cd .. && pwd)/user/[0-9a-f]\{32\}"
}

function test_multiple_commands_same_output_base() {
  # This test verifies that competing Bazel commands for the same output base
  # will run sequentially. It also verifies that the messages printed by Bazel
  # to tell the user that other processes are waited for are correct.
  #
  # This is a complex test because it deals with non-determinism: once we have
  # started Bazel commands in parallel, we can't tell how they will
  # finish... nor how they'll even start.  To address this, we force each
  # invocation to get "stuck" within a genrule and unblock it in a controlled
  # manner.  This lets us capture the order in which the commands complete so
  # that we can later make assertions on them.

  mkdir pkg

  local -r invocations=3  # Number of concurrent invocations.

  declare -a ready  # Files created by the wait[i] genrules when entered.
  declare -a lock  # Files on which the wait[i] genrules wait for.
  for i in $(seq ${invocations}); do
    ready[$i]="${TEST_TMPDIR}/ready.$i"
    lock[$i]="${TEST_TMPDIR}/fifo.$i"; mkfifo "${lock[$i]}"

    # Make sure the actions run locally, even if Bazel is configured to run them
    # remotely (which is the case when this test is run at Google), because we
    # must be able to synchronize with them through the fifos.
    cat >>pkg/BUILD <<EOF
genrule(name='wait$i', local = True, outs=['out.$i'],
        cmd='touch ${ready[$i]}; sleep 5; cat ${lock[$i]} >\$@')
EOF
  done

  declare -a log  # Paths to the outputs of the Bazel invocations.
  declare -a pid  # PIDs of the Bazel invocations.
  for i in $(seq ${invocations}); do
    log[$i]="${TEST_TMPDIR}/log.$i"
    bazel build "//pkg:wait$i" >>"${log[$i]}" 2>&1 &
    pid[$i]="${!}"
  done

  # The various Bazel invocations are now competing to run.  Wait for them
  # to start, in any order, and then allow them to proceed, recording the order
  # in which they actually started running the command.
  declare -a order
  local position=1
  while [ ${position} -le ${invocations} ]; do
    for i in $(seq ${invocations}); do
      if [ -e "${ready[$i]}" ]; then
        order[$i]=${position}; position=$((position + 1))
        echo unlock >"${lock[$i]}"
        rm "${ready[$i]}"
      fi
    done
    sleep 1
  done
  wait  # We unblocked all genrules so wait for actual terminations.

  # Dump outputs to the test log for debugging in case of test failure.
  for i in $(seq ${invocations}); do
    sed "s,^,bazel $i: ," "${log[$i]}" >>"${TEST_log}"
  done

  # Reorder invocations in the order they ran their commands so we can make
  # assertions more easily.
  declare -a orderedlog orderedpid
  for i in $(seq ${invocations}); do
    echo "bazel ${i} finished in position ${order[$i]} with PID ${pid[$i]}" \
        >>"${TEST_log}"
    orderedlog[${order[$i]}]="${log[$i]}"
    orderedpid[${order[$i]}]="${pid[$i]}"
  done

  # Helper function to check if the ith Bazel log contains the a regexp.
  expect_ith_log() {
    local i="${1}"; shift
    local re="${1}"; shift
    if ! grep -qE "${re}" "${orderedlog[$i]}"; then
      fail "$*: cannot find '${re}' in ${orderedlog[$i]}"
    fi
  }

  # Helper function to check if the ith Bazel log does not contain a regexp.
  not_expect_ith_log() {
    local i="${1}"; shift
    local re="${1}"; shift
    if grep -qE "${re}" "${orderedlog[$i]}"; then
      fail "$*: found '${re}' in ${orderedlog[$i]}"
    fi
  }

  # Expectations for the first invocation to run are easy: we know that it
  # didn't have to wait for anything.
  not_expect_ith_log 1 "Another command.*is running" \
    "first invocation waited but should not have"

  # Expectations for all other invocations are... tricky.  We can't tell how
  # ran, because of how locking works: sometimes we wait on the client and
  # sometimes we wait on the server.  Furthermore, the loop that used to check
  # if the PIDs have changed are time-based, so whether we detect a PID change
  # or not in the logs is also subject to timing.  Better to not even try.
  for i in $(seq 2 ${invocations}); do
    expect_ith_log $i \
        "\\(pid=${orderedpid[1]}\\).*on the (client|server)..." \
        "invocation $i did not wait for first one with pid ${orderedpid[1]}"

    # Make sure the trailing messages added to the wait lines are never seen on
    # their own.
    not_expect_ith_log $i "^ *lock taken by another server" \
        "lock taken message did not follow waiting message"
  done
}

function test_multiple_commands_different_output_base() {
  # This test verifies that competing Bazel commands for different output bases
  # will run in parallel.
  #
  # It works by having two concurrent commands, each running a non-hermetic test
  # that synchronizes with the other through a FIFO. If the tests time out, it
  # likely means one command was stuck waiting for the other.

  # The output bases for the two commands.
  local -r output_base_1="$TEST_TMPDIR/output_base_1"
  local -r output_base_2="$TEST_TMPDIR/output_base_2"

  # The FIFO used by the test to communicate.
  local -r fifo="$TEST_TMPDIR/fifo"
  mkfifo "$fifo" || fail "couldn't create fifo"

  # The test target.
  # Make sure it runs locally even if Bazel is configured to run actions
  # remotely (which is the case when this test is run at Google), because it
  # must be able to synchronize through the FIFO.
  add_rules_shell "MODULE.bazel"
  mkdir -p x
  cat > x/BUILD <<'EOF'
load("@rules_shell//shell:sh_test.bzl", "sh_test")
sh_test(name = "x", srcs = ["x.sh"], local = True)
EOF

  # The test script, whose arguments are:
  # - one of "read" or "write"
  # - the path to the fifo
  cat > x/x.sh <<'EOF'
#!/usr/bin/env bash
if [[ "$1" == "read" ]]; then
  cat "$2" > /dev/null
elif [[ "$1" == "write" ]]; then
  echo 1 > "$2"
else
  echo "invalid argument: $1"
  exit 1
fi
EOF
  chmod +x x/x.sh

  # Launch two commands concurrently.

  bazel --output_base="$output_base_1" test //x:x \
      --test_arg=read --test_arg="$fifo" --test_timeout=10 \
      &> "$TEST_log-1" &
  local -r pid_1="$!"

  bazel --output_base="$output_base_2" test //x:x \
      --test_arg=write --test_arg="$fifo" --test_timeout=10 \
      &> "$TEST_log-2" &
  local -r pid_2="$!"

  # Wait for both commands to complete.

  if ! wait "$pid_1"; then
    cat "$TEST_log-1" >> "$TEST_log"
    fail "first command failed"
  fi

  if ! wait "$pid_2"; then
    cat "$TEST_log-2" >> "$TEST_log"
    fail "second command failed"
  fi
}

function test_noblock_for_lock_reuse_server() {
  # Use a FIFO to spoonfeed the Bazel server.
  mkdir -p a && mkfifo a/BUILD || fail "couldn't create fifo a"
  mkdir -p b && mkfifo b/BUILD || fail "couldn't create fifo b"
  bazel --client_debug build --nobuild //a:a &> "$TEST_log" &
  local -r subshell_pid="$!"

  # Wait until Bazel reads a/BUILD. After that, it will block on b/BUILD.
  echo "filegroup(name='a', srcs=['//b:b'])" > a/BUILD

  # Get the client pid from the log. This isn't necessarily the subshell pid
  # because there might be wrapper scripts in between.
  local -r client_pid="$(cat "$TEST_log" | scrape_client_pid)"

  # Run another command in the same workspace but different startup options,
  # which requires a server restart. Since the server is currently running the
  # first command, it cannot restart immediately.
  local exit_code=0
  bazel --client_debug --noblock_for_lock info &> "$TEST_log-2" || exit_code=$?

  # Unstick the first server *before* checking expectations, otherwise the test
  # suite will hang.
  echo "filegroup(name='b', visibility=['//visibility:public'])" > b/BUILD
  wait "$subshell_pid" || fail "Couldn't wait"
  rm -rf a b

  assert_equals 9 "$exit_code" # LOCK_HELD_NOBLOCK_FOR_LOCK

  cat "$TEST_log-2" >> "$TEST_log"
  expect_log \
      "Another command (pid=$client_pid) is running. Exiting immediately."
}

function test_noblock_for_lock_new_server() {
  # Use a FIFO to spoonfeed the Bazel server.
  mkdir -p a && mkfifo a/BUILD || fail "couldn't create fifo a"
  mkdir -p b && mkfifo b/BUILD || fail "couldn't create fifo b"
  bazel --client_debug build --nobuild //a:a &> "$TEST_log" &
  local -r subshell_pid="$!"

  # Wait until Bazel reads a/BUILD. After that, it will block on b/BUILD.
  echo "filegroup(name='a', srcs=['//b:b'])" > a/BUILD

  # Run another command in the same workspace with the same startup options, so
  # that the server can be reused. Since the server is currently running the
  # first command, the second command cannot be immediately run.
  local exit_code=0
  bazel --client_debug --noblock_for_lock --host_jvm_args=-Dchampagne.supernova=1 info \
      &> "$TEST_log-2" || exit_code=$?

  # Unstick the first server *before* checking expectations, otherwise the test
  # suite will hang.
  echo "filegroup(name='b', visibility=['//visibility:public'])" > b/BUILD
  wait "$subshell_pid" || fail "Couldn't wait"
  rm -rf a b

  assert_equals 9 "$exit_code" # LOCK_HELD_NOBLOCK_FOR_LOCK

  cat "$TEST_log-2" >> "$TEST_log"
  # Note: In this case, the user does not get a "pid=#" description of the
  # client blocking the call. See the todo in KillRunningServer for a
  # potential fix.
  expect_log \
      "Exiting because the lock is held and --noblock_for_lock was given"
}

function test_noblock_for_lock_with_batch() {
  # Use a FIFO to spoonfeed the Bazel server.
  mkdir -p a && mkfifo a/BUILD || fail "couldn't create fifo a"
  mkdir -p b && mkfifo b/BUILD || fail "couldn't create fifo b"
  bazel --client_debug --batch build --nobuild //a:a &>"$TEST_log" &
  local -r subshell_pid="$!"

  # Wait until Bazel reads a/BUILD. After that, it will block on b/BUILD.
  echo "filegroup(name='a', srcs=['//b:b'])" > a/BUILD

  # Get the client pid from the log. This isn't necessarily the subshell pid
  # because there might be wrapper scripts in between.
  local -r client_pid="$(cat "$TEST_log" | scrape_client_pid)"

  local exit_code=0
  bazel --client_debug --batch --noblock_for_lock info &>"$TEST_log-2" || exit_code=$?

  # Unstick the first server *before* checking expectations, otherwise the test
  # suite will hang.
  echo "filegroup(name='b', visibility=['//visibility:public'])" > b/BUILD
  wait "$subshell_pid" || fail "Couldn't wait"
  rm -rf a b

  assert_equals 9 "$exit_code" # LOCK_HELD_NOBLOCK_FOR_LOCK

  cat "$TEST_log-2" >> "$TEST_log"
  expect_log "Another command holds the output base lock"
  expect_log "pid=$client_pid"
  expect_log \
      "Exiting because the output base lock is held and --noblock_for_lock was given"
}

function test_no_arguments() {
  bazel >&$TEST_log || fail "Expected zero exit"
  expect_log "Usage: b\\(laze\\|azel\\)"
}

function test_empty_command() {
  bazel '' >&$TEST_log && fail "Expected non-zero exit"
  expect_log "Command cannot be the empty string."
}

function test_local_startup_timeout() {
  local output_base=$(bazel info output_base 2>"$TEST_log") ||
    fail "bazel info failed"

  # --host-jvm_debug will cause the server to block, forcing the client
  # into the timeout condition.
  bazel --host_jvm_args="-agentlib:jdwp=transport=dt_socket,server=y,suspend=y,address=localhost:41687" \
      --local_startup_timeout_secs=1 2>"$TEST_log" &
  local timeout=20
  while true; do
    local jobs_output=$(jobs)
    [[ $jobs_output =~ Exit ]] && break
    [[ $jobs_output =~ Done ]] && fail "bazel should have exited non-zero"

    timeout="$(( ${timeout} - 1 ))"
    [[ "${timeout}" -gt 0 ]] || {
      kill -9 %1
      wait %1
      fail "--local_startup_timeout_secs was not respected"
    }
    # Wait for the client to exit.
    sleep 1
  done

  expect_log "Starting local.*server (.*) and connecting to it"
  expect_log "FATAL: couldn't connect to server"
}

function test_max_idle_secs() {
  # TODO(https://github.com/bazelbuild/bazel/issues/6773): Remove when fixed.
  bazel shutdown

  local options=( --max_idle_secs=1 )

  local output_base
  output_base="$(bazel "${options[@]}" info output_base 2>"$TEST_log")" \
    || fail "bazel info failed"
  local timeout=60  # Lower than the default --max_idle_secs.
  while [[ -f "${output_base}/server/server.pid.txt" ]]; do
    timeout="$(( ${timeout} - 1 ))"
    [[ "${timeout}" -gt 0 ]] || fail "--max_idle_secs was not respected"

    # Wait for the server to go away.
    sleep 1
  done

  bazel "${options[@]}" info >"$TEST_log" 2>&1 || fail "bazel info failed"
  expect_log "Starting local.*server (.*) and connecting to it"
  # Ensure the restart was not triggered by different startup options.
  expect_not_log "WARNING: Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_dashdash_before_command() {
  bazel -- info &>$TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 $exitcode
  expect_log "\\[FATAL .*\\] Unknown startup option: '--'."
}

function test_dashdash_after_command() {
  bazel info -- &>$TEST_log || fail "info -- failed"
}

function test_nobatch() {
  local pid1=$(bazel --batch --nobatch info server_pid 2> $TEST_log)
  local pid2=$(bazel --batch --nobatch info server_pid 2> $TEST_log)
  assert_equals "$pid1" "$pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

# Regression test for #1875189, "bazel client should pass through '--help' like
# a command".
function test_bazel_dash_dash_help_is_passed_through() {
  bazel --help >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
  expect_not_log "Unknown startup option: '--help'."
}

function test_bazel_dash_help() {
  bazel -help >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
}

function test_bazel_dash_h() {
  bazel -h >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
}

function test_bazel_dash_s_is_not_parsed() {
  bazel -s --help >&$TEST_log && fail "Expected failure"
  expect_log "Unknown startup option: '-s'."
}

function test_batch() {
  local pid1=$(bazel info server_pid 2> $TEST_log)
  local pid2=$(bazel --batch info server_pid 2> $TEST_log)
  assert_not_equals "$pid1" "$pid2"
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_cmdline_not_written_in_batch_mode() {
  OUTPUT_BASE=$(bazel --batch info output_base 2> $TEST_log)
  rm -f $OUTPUT_BASE/server/cmdline
  OUTPUT_BASE2=$(bazel --batch info output_base 2> $TEST_log)
  assert_equals "$OUTPUT_BASE" "$OUTPUT_BASE2"
  [[ ! -e $OUTPUT_BASE/server/cmdline ]] || fail "Command line file written."
}

function test_bad_command_batch() {
  bazel --batch notacommand &> $TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 "$exitcode"
  expect_log "Command 'notacommand' not found."
}

function test_bad_command_nobatch() {
  bazel --nobatch notacommand &> $TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 "$exitcode"
  expect_log "Command 'notacommand' not found."
}

function get_pid_environment() {
  local pid="$1"
  if is_linux; then
    cat "/proc/${pid}/environ" | tr '\0' '\n'
  elif is_darwin; then
    if ! ps > /dev/null; then
      echo "Cannot use ps command, probably due to sandboxing." >&2
      return 1
    fi
    ps eww -o command "${pid}" | tr ' ' '\n'
  else
    return 1
  fi
}

function test_proxy_settings() {
  # We expect that proxy settings are propagated from the client to the server
  # process, but are _not_ used for client-server communication.

  bazel shutdown  # We are changing the server process's environment variables.

  local example_no_proxy='foo.example.com'
  # A known-invalid http*_proxy value which, if not ignored, would be expected
  # to cause the client-server gRPC channel to time out or otherwise fail.
  local invalid_proxy='http://localhost:0'
  local server_pid
  server_pid="$(http_proxy="${invalid_proxy}" HTTP_PROXY="${invalid_proxy}" \
    https_proxy="${invalid_proxy}" HTTPS_PROXY="${invalid_proxy}" \
    no_proxy="${example_no_proxy}" NO_PROXY="${example_no_proxy}" \
    bazel info server_pid 2> $TEST_log)" \
    || fail "http*_proxy env variables not ignored by client-server channel."

  # Check that the server uses the *_proxy env variables set by the client.
  if get_pid_environment "${server_pid}" > "${TEST_TMPDIR}/server_env"; then
    local var
    for var in http{,s}_proxy HTTP{,S}_PROXY; do
      assert_contains "^${var}=${invalid_proxy}\$" "${TEST_TMPDIR}/server_env"
    done
    for var in no_proxy NO_PROXY; do
      assert_contains "^${var}=${example_no_proxy}\$" \
        "${TEST_TMPDIR}/server_env"
    done
  else
    echo "cannot test server process environment on this platform"
  fi
}

function test_macos_qos_class() {
  for class in default utility background; do
    bazel --macos_qos_class="${class}" info >"${TEST_log}" 2>&1 \
      || fail "Unknown QoS class ${class}"
    # On macOS it'd be nice to verify that the server is indeed running at the
    # desired class... but this is very hard to do.  Common utilities do not
    # print the QoS level, and powermetrics (which requires root privileges)
    # only reports it under load -- so an "info" command is insufficient and the
    # real thing would be quite expensive.
  done

  for class in user-interactive user-initiated ; do
    bazel --macos_qos_class="${class}" >"${TEST_log}" 2>&1 \
      && fail "Expected failure with invalid QoS class name"
    expect_log "Invalid argument.*qos_class.*${class}"
  done
}

function test_ignores_jdk_option_environment_variables() {
  bazel shutdown  # Environment variables are only checked on server startup
  _JAVA_OPTIONS=--wat1 JDK_JAVA_OPTIONS=--wat2 JAVA_TOOL_OPTIONS=--wat3 \
    bazel version >&$TEST_log || fail "_JAVA_OPTIONS not ignored"

  expect_log ".*ignoring _JAVA_OPTIONS"
  expect_log ".*ignoring JDK_JAVA_OPTIONS"
  expect_log ".*ignoring JAVA_TOOL_OPTIONS"
}

# Demonstrates that the client program prints exactly what we expect to stderr
# and stdout. Notably by default (--client_debug=false) there should be no debug
# log statements from our own codebase (or even from libraries we use!) printed
# to stderr.
function test_client_is_quiet_by_default() {
  local capitalized_product_name="$(echo "$PRODUCT_NAME" | awk '{print toupper(substr($0,1,1)) substr($0,2)}')"
  # Ensure we don't have a server running. Also ensure we've already extracted
  # the installation (that way we don't expect an informational message about
  # that).
  bazel shutdown &> /dev/null

  bazel info server_pid > stdout 2> stderr || fail "bazel info failed"
  cp stderr $TEST_log || fail "cp failed"

  strip_lines_from_bazel_cc

  lines=$(cat $TEST_log | wc -l)
  [[ $lines -ge 2 && $lines -le 3 ]] || fail "Log has incorrect number of lines"
  expect_log "^\$TEST_TMPDIR defined, some defaults will be overridden"
  expect_log "^Starting local $capitalized_product_name server (.*) and connecting to it...$"
  cp stdout $TEST_log || fail "cp failed"

  strip_lines_from_bazel_cc

  assert_equals 1 $(cat $TEST_log | wc -l)
  expect_log "^[0-9]\+$"

  rm stderr stdout || fail "rm failed"
  bazel info server_pid > stdout 2> stderr || fail "bazel info failed"
  cp stderr $TEST_log || fail "cp failed"

  strip_lines_from_bazel_cc

  lines=$(cat $TEST_log | wc -l)
  [[ $lines -ge 1 && $lines -le 2 ]] || fail "Log has incorrect number of lines"
  expect_log "^\$TEST_TMPDIR defined, some defaults will be overridden"
  cp stdout $TEST_log || fail "cp failed"

  strip_lines_from_bazel_cc

  assert_equals 1 $(cat $TEST_log | wc -l)
  expect_log "^[0-9]\+$"
}

function test_sigquit() {
  # Use a FIFO to spoonfeed the Bazel server.
  mkdir -p a && mkfifo a/BUILD || fail "couldn't create fifo a"
  mkdir -p b && mkfifo b/BUILD || fail "couldn't create fifo b"
  bazel --client_debug build --nobuild //a:a &> "$TEST_log" &
  local -r subshell_pid="$!"

  # Wait until Bazel reads a/BUILD. After that, it will block on b/BUILD.
  echo "filegroup(name='a', srcs=['//b:b'])" > a/BUILD

  # Get the client pid from the log. This isn't necessarily the subshell pid
  # because there might be wrapper scripts in between.
  local -r client_pid="$(cat "$TEST_log" | scrape_client_pid)"

  # Send a SIGQUIT to the client.
  kill -SIGQUIT "$client_pid"

  # Unstick the server *before* checking expectations, otherwise the test suite
  # will hang.
  echo "filegroup(name='b', visibility=['//visibility:public'])" > b/BUILD
  wait "$subshell_pid" || fail "Couldn't wait"
  rm -rf a b

  # Get the jvm.out location.
  local -r jvm_out="$(bazel --client_debug info output_base)/server/jvm.out"

  # Look for a distinctive string indicating the presence of a thread dump.
  assert_contains "Full thread dump" "$jvm_out"
}

function scrape_client_pid() {
  sed -nr 's/.*Running \(pid=([0-9]+)\)/\1/p'
}

run_suite "Tests of the bazel client."