#!/bin/bash
#
# Copyright 2015 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

set -euo pipefail

# Load the test setup defined in the parent directory
CURRENT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
source "${CURRENT_DIR}/../integration_test_setup.sh" \
  || { echo "integration_test_setup.sh not found!" >&2; exit 1; }
source "${CURRENT_DIR}/execution_statistics_utils.sh" \
  || { echo "execution_statistics_utils.sh not found!" >&2; exit 1; }

enable_errexit

readonly CPU_TIME_SPENDER="${CURRENT_DIR}/../../../test/shell/integration/spend_cpu_time"

readonly OUT_DIR="${TEST_TMPDIR}/out"
readonly OUT="${OUT_DIR}/outfile"
readonly ERR="${OUT_DIR}/errfile"

readonly EXIT_STATUS_SIGABRT=$((128 + 6))
readonly EXIT_STATUS_SIGKILL=$((128 + 9))
readonly EXIT_STATUS_SIGALRM=$((128 + 14))

function set_up() {
  rm -rf $OUT_DIR
  mkdir -p $OUT_DIR
}

function assert_stdout() {
  assert_equals "$1" "$(cat $OUT)"
}

function assert_output() {
  assert_equals "$1" "$(cat $OUT)"
  assert_equals "$2" "$(cat $ERR)"
}

function test_basic_functionality() {
  $process_wrapper --stdout=$OUT --stderr=$ERR /bin/echo hi there &> $TEST_log || fail
  assert_output "hi there" ""
}

function test_to_stderr() {
  $process_wrapper --stdout=$OUT --stderr=$ERR /bin/sh -c "/bin/echo hi there >&2" &> $TEST_log || fail
  assert_output "" "hi there"
}

function test_exit_code() {
  local code=0
  $process_wrapper --stdout=$OUT --stderr=$ERR /bin/sh -c "exit 71" &> $TEST_log || code=$?
  assert_equals 71 "$code"
}

function test_signal_death() {
  local code=0
  $process_wrapper --stdout=$OUT --stderr=$ERR /bin/sh -c 'kill -ABRT $$' &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGABRT}" "$code"
}

function test_signal_catcher() {
  local code=0
  $process_wrapper --timeout=1 --kill_delay=10 --stdout=$OUT --stderr=$ERR /bin/sh -c \
    'trap "echo later; exit 0" INT TERM ALRM; sleep 10' &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGALRM}" "$code"
  assert_stdout "later"
}

function test_basic_timeout() {
  $process_wrapper --timeout=1 --kill_delay=2 --stdout=$OUT --stderr=$ERR /bin/sh -c \
    "echo before; sleep 10; echo after" &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGALRM}" "$code"
  assert_stdout "before"
}

# Tests that the timeout causes the process to receive a SIGTERM, but with the
# process exiting on its own without the need for a SIGKILL. To make sure that
# this is the case, we pass a very large kill delay to cause the outer test to
# fail if we violate this expectation.
function test_timeout_grace() {
  local code=0
  $process_wrapper --timeout=1 --kill_delay=100000 --stdout=$OUT --stderr=$ERR \
    /bin/sh -c \
    'trap "echo ignoring signal" INT TERM ARLM; \
     for i in $(seq 5); do sleep 1; done; echo after' \
    &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGALRM}" "$code"
  assert_stdout 'ignoring signal
after'
}

# Tests that the timeout causes the process to receive a SIGTERM and waits until
# the process has exited on its own, even if that takes a little bit of time. To
# make sure that this is the case, we pass a very large kill delay to cause the
# outer test to fail if we violate this expectation.
#
# In the past, even though we would terminate the process quickly, we would
# get stuck until the kill delay passed (because we'd be stuck waiting for a
# zombie process without us actually collecting it). So this is a regression
# test for that subtle bug.
function test_timeout_exits_as_soon_as_process_terminates() {
  local code=0
  $process_wrapper --timeout=1 --kill_delay=100000 --stdout=$OUT --stderr=$ERR \
    /bin/sh -c \
    'trap "" INT TERM ARLM; \
     for i in $(seq 5); do echo sleeping $i; sleep 1; done' \
    &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGALRM}" "$code"
  assert_stdout 'sleeping 1
sleeping 2
sleeping 3
sleeping 4
sleeping 5'
}

# Tests that the timeout causes the process to receive a SIGTERM first and a
# SIGKILL later once a kill delay has passed without the process exiting on
# its own. We make the process get stuck indefinitely until killed, and we do
# this with individual calls to sleep instead of a single one to ensure that a
# single termination of the sleep subprocess doesn't cause us to spuriously
# exit and thus pass this test.
function test_timeout_kill() {
  local code=0
  $process_wrapper --timeout=1 --kill_delay=5 --stdout=$OUT --stderr=$ERR \
    /bin/sh -c \
    'trap "echo ignoring signal" INT TERM ARLM; \
     while :; do sleep 1; done; echo after' \
    &> $TEST_log || code=$?
  assert_equals "${EXIT_STATUS_SIGALRM}" "$code"
  assert_stdout 'ignoring signal'
}

function test_execvp_error_message() {
  local code=0
  $process_wrapper --stdout=$OUT --stderr=$ERR /bin/notexisting &> $TEST_log || code=$?
  assert_equals 1 "$code"
  assert_contains "\"execvp(/bin/notexisting, ...)\": No such file or directory" "$ERR"
}

function assert_process_wrapper_exec_time() {
  local user_time_low="$1"; shift
  local user_time_high="$1"; shift
  local sys_time_low="$1"; shift
  local sys_time_high="$1"; shift

  local local_tmp="$(mktemp -d "${OUT_DIR}/assert_process_wrapper_timeXXXXXX")"
  local stdout_path="${local_tmp}/stdout"
  local stderr_path="${local_tmp}/stderr"
  local stats_out_path="${local_tmp}/statsfile"
  local stats_out_decoded_path="${local_tmp}/statsfile.decoded"

  # Wrapped process will be terminated after 100 seconds if not self terminated.
  local code=0
  "${process_wrapper}" \
      --timeout=100 \
      --kill_delay=2 \
      --stdout="${stdout_path}" \
      --stderr="${stderr_path}" \
      --stats="${stats_out_path}" \
      "${CPU_TIME_SPENDER}" "${user_time_low}" "${sys_time_low}" \
      &> "${TEST_log}" || code="$?"
  sed -e 's,^subprocess stdout: ,,' "${stdout_path}" >>"${TEST_log}"
  sed -e 's,^subprocess stderr: ,,' "${stderr_path}" >>"${TEST_log}"
  assert_equals 0 "${code}"

  assert_execution_time_in_range \
      "${user_time_low}" \
      "${user_time_high}" \
      "${sys_time_low}" \
      "${sys_time_high}" \
      "${stats_out_path}"
}

function test_stats_high_user_time() {
  assert_process_wrapper_exec_time 10 19 0 9
}

function test_stats_high_system_time() {
  assert_process_wrapper_exec_time 0 9 10 19
}

function test_stats_high_user_time_and_high_system_time() {
  assert_process_wrapper_exec_time 10 25 10 25
}

run_suite "process-wrapper"