layout: documentation title: Optimizing Performance

Optimizing Performance

When writing rules, the most common performance pitfall is to traverse or copy data that is accumulated from dependencies. When aggregated over the whole build, these operations can easily take O(N^2) time or space. To avoid this, it is crucial to understand how to use depsets effectively.

This can be hard to get right, so Bazel also provides a memory profiler that assists you in finding spots where you might have made a mistake. Be warned: The cost of writing an inefficient rule may not be evident until it is in widespread use.

Use depsets

Whenever you are rolling up information from rule dependencies you should use depsets. Only use plain lists or dicts to publish information local to the current rule.

A depset represents information as a nested graph which enables sharing.

Consider the following graph:

C -> B -> A
D ---^

Each node publishes a single string. With depsets the data looks like this:

a = depset(direct=['a'])
b = depset(direct=['b'], transitive=[a])
c = depset(direct=['c'], transitive=[b])
d = depset(direct=['d'], transitive=[b])

Note that each item is only mentioned once. With lists you would get this:

a = ['a']
b = ['b', 'a']
c = ['c', 'b', 'a']
d = ['d', 'b', 'a']

Note that in this case 'a' is mentioned four times! With larger graphs this problem will only get worse.

Here is an example of a rule implementation that uses depsets correctly to publish transitive information. Note that it is OK to publish rule-local information using lists if you want since this is not O(N^2).

MyProvider = provider()

def _impl(ctx):
  my_things = ctx.attr.things
  all_things = depset(
      direct=my_things,
      transitive=[dep[MyProvider].all_things for dep in ctx.attr.deps]
  )
  ...
  return [MyProvider(
    my_things=my_things,  # OK, a flat list of rule-local things only
    all_things=all_things,  # OK, a depset containing dependencies
  )]

See the depset overview page for more information.

Avoid calling depset.to_list()

You can coerce a depset to a flat list using to_list(), but doing so usually results in O(N^2) cost. If at all possible, avoid any flattening of depsets except for debugging purposes.

A common misconception is that you can freely flatten depsets if you only do it at top-level targets, such as an <xx>_binary rule, since then the cost is not accumulated over each level of the build graph. But this is still O(N^2) when you build a set of targets with overlapping dependencies. This happens when building your tests //foo/tests/..., or when importing an IDE project.

Note: Today it is possible to flatten depsets implicitly by iterating over the depset the way you would a list, tuple, or dictionary, or by taking the depset's size via len(). This functionality is deprecated. and will be removed.

Avoid calling len(depset)

It is O(N) to get the number of items in a depset. It is however O(1) to check if a depset is empty. This includes checking the truthiness of a depset:

def _impl(ctx):
  args = ctx.actions.args()
  files = depset(...)

  # Bad, has to iterate over entire depset to get length
  if len(files) == 0:
    args.add("--files")
    args.add_all(files)

  # Good, O(1)
  if files:
    args.add("--files")
    args.add_all(files)

As mentioned above, support for len(<depset>) is deprecated.

Use ctx.actions.args() for command lines

When building command lines you should use ctx.actions.args(). This defers expansion of any depsets to the execution phase.

Apart from being strictly faster, this will reduce the memory consumption of your rules -- sometimes by 90% or more.

Here are some tricks:

  • Pass depsets and lists directly as arguments, instead of flattening them yourself. They will get expanded by ctx.actions.args() for you. If you need any transformations on the depset contents, look at ctx.actions.args#add to see if anything fits the bill.

  • Are you passing File#path as arguments? No need. Any File is automatically turned into its path, deferred to expansion time.

  • Avoid constructing strings by concatenating them together. The best string argument is a constant as its memory will be shared between all instances of your rule.

  • If the args are too long for the command line an ctx.actions.args() object can be conditionally or unconditionally written to a param file using ctx.actions.args#use_param_file. This is done behind the scenes when the action is executed. If you need to explictly control the params file you can write it manually using ctx.actions.write.

Example:

def _impl(ctx):
  ...
  args = ctx.actions.Args()
  file = ctx.declare_file(...)
  files = depset(...)

  # Bad, constructs a full string "--foo=<file path>" for each rule instance
  args.add("--foo=" + file.path)

  # Good, shares "-foo" among all rule instances, and defers file.path to later
  args.add("--foo")
  args.add(file)

  # Use format if you prefer ["--foo=<file path>"] to ["--foo", <file path>]
  args.add(format="--foo=%s", value=file)

  # Bad, makes a giant string of a whole depset
  args.add(" ".join(["-I%s" % file.short_path for file in files])

  # Good, only stores a reference to the depset
  args.add_all(files, format_each="-I%s", map_each=_to_short_path)

# Function passed to map_each above
def _to_short_path(f):
  return f.short_path

Transitive action inputs should be depsets

When building an action using ctx.actions.run, do not forget that the inputs field accepts a depset. Use this whenever inputs are collected from dependencies transitively.

inputs = depset(...)
ctx.actions.run(
  inputs = inputs,  # Do *not* turn inputs into a list
  ...
)

Performance profiling

To profile your code and analyze the performance, use the --profile flag:

$ bazel build --nobuild --profile=/tmp/prof //path/to:target
$ bazel analyze-profile /tmp/prof --html --html_details

Then, open the generated HTML file (/tmp/prof.html in the example).

Memory Profiling

Bazel comes with a built-in memory profiler that can help you check your rule's memory use. If there is a problem you can dump the heap to find the exact line of code that is causing the problem.

Enabling Memory Tracking

You must pass these two startup flags to every Bazel invocation:

STARTUP_FLAGS=\
--host_jvm_args=-javaagent:$(BAZEL)/third_party/allocation_instrumenter/java-allocation-instrumenter-3.0.1.jar \
--host_jvm_args=-DRULE_MEMORY_TRACKER=1

NOTE: The bazel repository comes with an allocation instrumenter. Make sure to adjust ‘$(BAZEL)’ for your repository location.

These start the server in memory tracking mode. If you forget these for even one Bazel invocation the server will restart and you will have to start over.

Using the Memory Tracker

Let‘s have a look at the target foo and see what it’s up to. We add --nobuild since it doesn't matter to memory consumption if we actually build or not, we just have to run the analysis phase.

$ bazel $(STARTUP_FLAGS) build --nobuild //foo:foo

Let's see how much memory the whole Bazel instance consumes:

$ bazel $(STARTUP_FLAGS) info used-heap-size-after-gc
> 2594MB

Let's break it down by rule class by using bazel dump --rules:

$ bazel $(STARTUP_FLAGS) dump --rules
>

RULE                                 COUNT     ACTIONS          BYTES         EACH
genrule                             33,762      33,801    291,538,824        8,635
config_setting                      25,374           0     24,897,336          981
filegroup                           25,369      25,369     97,496,272        3,843
cc_library                           5,372      73,235    182,214,456       33,919
proto_library                        4,140     110,409    186,776,864       45,115
android_library                      2,621      36,921    218,504,848       83,366
java_library                         2,371      12,459     38,841,000       16,381
_gen_source                            719       2,157      9,195,312       12,789
_check_proto_library_deps              719         668      1,835,288        2,552
... (more output)

And finally let's have a look at where the memory is going by producing a pprof file using bazel dump --skylark_memory:

$ bazel $(STARTUP_FLAGS) dump --skylark_memory=$HOME/prof.gz
> Dumping skylark heap to: /usr/local/google/home/$USER/prof.gz

Next, we use the pprof tool to investigate the heap. A good starting point is getting a flame graph by using pprof -flame $HOME/prof.gz.

You can get pprof from https://github.com/google/pprof.

In this case we get a text dump of the hottest call sites annotated with lines:

$ pprof -text -lines $HOME/prof.gz
>
      flat  flat%   sum%        cum   cum%
  146.11MB 19.64% 19.64%   146.11MB 19.64%  android_library <native>:-1
  113.02MB 15.19% 34.83%   113.02MB 15.19%  genrule <native>:-1
   74.11MB  9.96% 44.80%    74.11MB  9.96%  glob <native>:-1
   55.98MB  7.53% 52.32%    55.98MB  7.53%  filegroup <native>:-1
   53.44MB  7.18% 59.51%    53.44MB  7.18%  sh_test <native>:-1
   26.55MB  3.57% 63.07%    26.55MB  3.57%  _generate_foo_files /foo/tc/tc.bzl:491
   26.01MB  3.50% 66.57%    26.01MB  3.50%  _build_foo_impl /foo/build_test.bzl:78
   22.01MB  2.96% 69.53%    22.01MB  2.96%  _build_foo_impl /foo/build_test.bzl:73
   ... (more output)