Project: /_project.yaml Book: /_book.yaml
{% include “_buttons.html” %}
This document is a description of the codebase and how Bazel is structured. It is intended for people willing to contribute to Bazel, not for end-users.
The codebase of Bazel is large (~350KLOC production code and ~260 KLOC test code) and no one is familiar with the whole landscape: everyone knows their particular valley very well, but few know what lies over the hills in every direction.
In order for people midway upon the journey not to find themselves within a forest dark with the straightforward pathway being lost, this document tries to give an overview of the codebase so that it's easier to get started with working on it.
The public version of the source code of Bazel lives on GitHub at github.com/bazelbuild/bazel. This is not the “source of truth”; it's derived from a Google-internal source tree that contains additional functionality that is not useful outside Google. The long-term goal is to make GitHub the source of truth.
Contributions are accepted through the regular GitHub pull request mechanism, and manually imported by a Googler into the internal source tree, then re-exported back out to GitHub.
The bulk of Bazel resides in a server process that stays in RAM between builds. This allows Bazel to maintain state between builds.
This is why the Bazel command line has two kinds of options: startup and command. In a command line like this:
bazel --host_jvm_args=-Xmx8G build -c opt //foo:bar
Some options (--host_jvm_args=) are before the name of the command to be run and some are after (-c opt); the former kind is called a “startup option” and affects the server process as a whole, whereas the latter kind, the “command option”, only affects a single command.
Each server instance has a single associated workspace (collection of source trees known as “repositories”) and each workspace usually has a single active server instance. This can be circumvented by specifying a custom output base (see the “Directory layout” section for more information).
Bazel is distributed as a single ELF executable that is also a valid .zip file. When you type bazel, the above ELF executable implemented in C++ (the “client”) gets control. It sets up an appropriate server process using the following steps:
$OUTPUT_BASE/server where there is a lock file with the port the server is listening on.After a suitable server process is ready, the command that needs to be run is communicated to it over a gRPC interface, then the output of Bazel is piped back to the terminal. Only one command can be running at the same time. This is implemented using an elaborate locking mechanism with parts in C++ and parts in Java. There is some infrastructure for running multiple commands in parallel, since the inability to run bazel version in parallel with another command is somewhat embarrassing. The main blocker is the life cycle of BlazeModules and some state in BlazeRuntime.
At the end of a command, the Bazel server transmits the exit code the client should return. An interesting wrinkle is the implementation of bazel run: the job of this command is to run something Bazel just built, but it can‘t do that from the server process because it doesn’t have a terminal. So instead it tells the client what binary it should exec() and with what arguments.
When one presses Ctrl-C, the client translates it to a Cancel call on the gRPC connection, which tries to terminate the command as soon as possible. After the third Ctrl-C, the client sends a SIGKILL to the server instead.
The source code of the client is under src/main/cpp and the protocol used to communicate with the server is in src/main/protobuf/command_server.proto .
The main entry point of the server is BlazeRuntime.main() and the gRPC calls from the client are handled by GrpcServerImpl.run().
Bazel creates a somewhat complicated set of directories during a build. A full description is available in Output directory layout.
The “main repo” is the source tree Bazel is run in. It usually corresponds to something you checked out from source control. The root of this directory is known as the “workspace root”.
Bazel puts all of its data under the “output user root”. This is usually $HOME/.cache/bazel/_bazel_${USER}, but can be overridden using the --output_user_root startup option.
The “install base” is where Bazel is extracted to. This is done automatically and each Bazel version gets a subdirectory based on its checksum under the install base. It's at $OUTPUT_USER_ROOT/install by default and can be changed using the --install_base command line option.
The “output base” is the place where the Bazel instance attached to a specific workspace writes to. Each output base has at most one Bazel server instance running at any time. It's usually at $OUTPUT_USER_ROOT/<checksum of the path to the workspace>. It can be changed using the --output_base startup option, which is, among other things, useful for getting around the limitation that only one Bazel instance can be running in any workspace at any given time.
The output directory contains, among other things:
$OUTPUT_BASE/external.$OUTPUT_BASE/execroot. During the build, the working directory is $EXECROOT/<name of main repository>. We are planning to change this to $EXECROOT, although it’s a long term plan because it's a very incompatible change.Once the Bazel server gets control and is informed about a command it needs to execute, the following sequence of events happens:
BlazeCommandDispatcher is informed about the new request. It decides whether the command needs a workspace to run in (almost every command except for ones that don't have anything to do with source code, such as version or help) and whether another command is running.
The right command is found. Each command must implement the interface BlazeCommand and must have the @Command annotation (this is a bit of an antipattern, it would be nice if all the metadata a command needs was described by methods on BlazeCommand)
The command line options are parsed. Each command has different command line options, which are described in the @Command annotation.
An event bus is created. The event bus is a stream for events that happen during the build. Some of these are exported to outside of Bazel under the aegis of the Build Event Protocol in order to tell the world how the build goes.
The command gets control. The most interesting commands are those that run a build: build, test, run, coverage and so on: this functionality is implemented by BuildTool.
The set of target patterns on the command line is parsed and wildcards like //pkg:all and //pkg/... are resolved. This is implemented in AnalysisPhaseRunner.evaluateTargetPatterns() and reified in Skyframe as TargetPatternPhaseValue.
The loading/analysis phase is run to produce the action graph (a directed acyclic graph of commands that need to be executed for the build).
The execution phase is run. This means running every action required to build the top-level targets that are requested are run.
The command line options for a Bazel invocation are described in an OptionsParsingResult object, which in turn contains a map from “option classes” to the values of the options. An “option class” is a subclass of OptionsBase and groups command line options together that are related to each other. For example:
CppOptions or JavaOptions). These should be a subclass of FragmentOptions and are eventually wrapped into a BuildOptions object.ExecutionOptions)These options are designed to be consumed in the analysis phase and (either through RuleContext.getFragment() in Java or ctx.fragments in Starlark). Some of them (for example, whether to do C++ include scanning or not) are read in the execution phase, but that always requires explicit plumbing since BuildConfiguration is not available then. For more information, see the section “Configurations”.
WARNING: We like to pretend that OptionsBase instances are immutable and use them that way (such as a part of SkyKeys). This is not the case and modifying them is a really good way to break Bazel in subtle ways that are hard to debug. Unfortunately, making them actually immutable is a large endeavor. (Modifying a FragmentOptions immediately after construction before anyone else gets a chance to keep a reference to it and before equals() or hashCode() is called on it is okay.)
Bazel learns about option classes in the following ways:
CommonCommandOptions)@Command annotation on each Bazel commandConfiguredRuleClassProvider (these are command line options related to individual programming languages)Each option (excluding Starlark-defined options) is a member variable of a FragmentOptions subclass that has the @Option annotation, which specifies the name and the type of the command line option along with some help text.
The Java type of the value of a command line option is usually something simple (a string, an integer, a Boolean, a label, etc.). However, we also support options of more complicated types; in this case, the job of converting from the command line string to the data type falls to an implementation of com.google.devtools.common.options.Converter.
Bazel is in the business of building software, which happens by reading and interpreting the source code. The totality of the source code Bazel operates on is called “the workspace” and it is structured into repositories, packages and rules.
A “repository” is a source tree on which a developer works; it usually represents a single project. Bazel's ancestor, Blaze, operated on a monorepo, that is, a single source tree that contains all source code used to run the build. Bazel, in contrast, supports projects whose source code spans multiple repositories. The repository from which Bazel is invoked is called the “main repository”, the others are called “external repositories”.
A repository is marked by a repo boundary file (MODULE.bazel, REPO.bazel, or in legacy contexts, WORKSPACE or WORKSPACE.bazel) in its root directory. The main repo is the source tree where you're invoking Bazel from. External repos are defined in various ways; see external dependencies overview for more information.
Code of external repositories is symlinked or downloaded under $OUTPUT_BASE/external.
When running the build, the whole source tree needs to be pieced together; this is done by SymlinkForest, which symlinks every package in the main repository to $EXECROOT and every external repository to either $EXECROOT/external or $EXECROOT/...
Every repository is composed of packages, a collection of related files and a specification of the dependencies. These are specified by a file called BUILD or BUILD.bazel. If both exist, Bazel prefers BUILD.bazel; the reason why BUILD files are still accepted is that Bazel's ancestor, Blaze, used this file name. However, it turned out to be a commonly used path segment, especially on Windows, where file names are case-insensitive.
Packages are independent of each other: changes to the BUILD file of a package cannot cause other packages to change. The addition or removal of BUILD files _can _change other packages, since recursive globs stop at package boundaries and thus the presence of a BUILD file stops the recursion.
The evaluation of a BUILD file is called “package loading”. It‘s implemented in the class PackageFactory, works by calling the Starlark interpreter and requires knowledge of the set of available rule classes. The result of package loading is a Package object. It’s mostly a map from a string (the name of a target) to the target itself.
A large chunk of complexity during package loading is globbing: Bazel does not require every source file to be explicitly listed and instead can run globs (such as glob(["**/*.java"])). Unlike the shell, it supports recursive globs that descend into subdirectories (but not into subpackages). This requires access to the file system and since that can be slow, we implement all sorts of tricks to make it run in parallel and as efficiently as possible.
Globbing is implemented in the following classes:
LegacyGlobber, a fast and blissfully Skyframe-unaware globberSkyframeHybridGlobber, a version that uses Skyframe and reverts back to the legacy globber in order to avoid “Skyframe restarts” (described below)The Package class itself contains some members that are exclusively used to parse the “external” package (related to external dependencies) and which do not make sense for real packages. This is a design flaw because objects describing regular packages should not contain fields that describe something else. These include:
Ideally, there would be more separation between parsing the “external” package from parsing regular packages so that Package does not need to cater for the needs of both. This is unfortunately difficult to do because the two are intertwined quite deeply.
Packages are composed of targets, which have the following types:
cc_library, java_library or py_library), but there are some language-agnostic ones (such as genrule or filegroup)The name of a target is called a Label. The syntax of labels is @repo//pac/kage:name, where repo is the name of the repository the Label is in, pac/kage is the directory its BUILD file is in and name is the path of the file (if the label refers to a source file) relative to the directory of the package. When referring to a target on the command line, some parts of the label can be omitted:
name or :name), the label is taken to be in the package of the current working directory (relative paths containing uplevel references (..) are not allowed)A kind of a rule (such as “C++ library”) is called a “rule class”. Rule classes may be implemented either in Starlark (the rule() function) or in Java (so called “native rules”, type RuleClass). In the long term, every language-specific rule will be implemented in Starlark, but some legacy rule families (such as Java or C++) are still in Java for the time being.
Starlark rule classes need to be imported at the beginning of BUILD files using the load() statement, whereas Java rule classes are “innately” known by Bazel, by virtue of being registered with the ConfiguredRuleClassProvider.
Rule classes contain information such as:
srcs, deps): their types, default values, constraints, etc.Terminology note: In the codebase, we often use “Rule” to mean the target created by a rule class. But in Starlark and in user-facing documentation, “Rule” should be used exclusively to refer to the rule class itself; the target is just a “target”. Also note that despite RuleClass having “class” in its name, there is no Java inheritance relationship between a rule class and targets of that type.
The evaluation framework underlying Bazel is called Skyframe. Its model is that everything that needs to be built during a build is organized into a directed acyclic graph with edges pointing from any pieces of data to its dependencies, that is, other pieces of data that need to be known to construct it.
The nodes in the graph are called SkyValues and their names are called SkyKeys. Both are deeply immutable; only immutable objects should be reachable from them. This invariant almost always holds, and in case it doesn't (such as for the individual options classes BuildOptions, which is a member of BuildConfigurationValue and its SkyKey) we try really hard not to change them or to change them in only ways that are not observable from the outside. From this it follows that everything that is computed within Skyframe (such as configured targets) must also be immutable.
The most convenient way to observe the Skyframe graph is to run bazel dump --skyframe=deps, which dumps the graph, one SkyValue per line. It's best to do it for tiny builds, since it can get pretty large.
Skyframe lives in the com.google.devtools.build.skyframe package. The similarly-named package com.google.devtools.build.lib.skyframe contains the implementation of Bazel on top of Skyframe. More information about Skyframe is available here.
To evaluate a given SkyKey into a SkyValue, Skyframe will invoke the SkyFunction corresponding to the type of the key. During the function‘s evaluation, it may request other dependencies from Skyframe by calling the various overloads of SkyFunction.Environment.getValue(). This has the side-effect of registering those dependencies into Skyframe’s internal graph, so that Skyframe will know to re-evaluate the function when any of its dependencies change. In other words, Skyframe's caching and incremental computation work at the granularity of SkyFunctions and SkyValues.
Whenever a SkyFunction requests a dependency that is unavailable, getValue() will return null. The function should then yield control back to Skyframe by itself returning null. At some later point, Skyframe will evaluate the unavailable dependency, then restart the function from the beginning — only this time the getValue() call will succeed with a non-null result.
A consequence of this is that any computation performed inside the SkyFunction prior to the restart must be repeated. But this does not include work done to evaluate dependency SkyValues, which are cached. Therefore, we commonly work around this issue by:
getValuesAndExceptions()) to limit the number of restarts.SkyValue into separate pieces computed by different SkyFunctions, so that they can be computed and cached independently. This should be done strategically, since it has the potential to increases memory usage.SkyFunction.Environment.getState(), or keeping an ad hoc static cache “behind the back of Skyframe”. With complex SkyFunctions, state management between restarts can get tricky, so StateMachines were introduced for a structured approach to logical concurrency, including hooks to suspend and resume hierarchical computations within a SkyFunction. Example: DependencyResolver#computeDependencies uses a StateMachine with getState() to compute the potentially huge set of direct dependencies of a configured target, which otherwise can result in expensive restarts.Fundamentally, Bazel need these types of workarounds because hundreds of thousands of in-flight Skyframe nodes is common, and Java's support of lightweight threads does not outperform the StateMachine implementation as of 2023.
Starlark is the domain-specific language people use to configure and extend Bazel. It's conceived as a restricted subset of Python that has far fewer types, more restrictions on control flow, and most importantly, strong immutability guarantees to enable concurrent reads. It is not Turing-complete, which discourages some (but not all) users from trying to accomplish general programming tasks within the language.
Starlark is implemented in the net.starlark.java package. It also has an independent Go implementation here{: .external}. The Java implementation used in Bazel is currently an interpreter.
Starlark is used in several contexts, including:
BUILD files. This is where new build targets are defined. Starlark code running in this context only has access to the contents of the BUILD file itself and .bzl files loaded by it.MODULE.bazel file. This is where external dependencies are defined. Starlark code running in this context only has very limited access to a few predefined directives..bzl files. This is where new build rules, repo rules, module extensions are defined. Starlark code here can define new functions and load from other .bzl files.The dialects available for BUILD and .bzl files are slightly different because they express different things. A list of differences is available here.
More information about Starlark is available here.
The loading/analysis phase is where Bazel determines what actions are needed to build a particular rule. Its basic unit is a “configured target”, which is, quite sensibly, a (target, configuration) pair.
It's called the “loading/analysis phase” because it can be split into two distinct parts, which used to be serialized, but they can now overlap in time:
BUILD files into the Package objects that represent themEach configured target in the transitive closure of the configured targets requested on the command line must be analyzed bottom-up; that is, leaf nodes first, then up to the ones on the command line. The inputs to the analysis of a single configured target are:
The output of analyzing a configured target is:
The API offered to Java rules is RuleContext, which is the equivalent of the ctx argument of Starlark rules. Its API is more powerful, but at the same time, it's easier to do Bad Things™, for example to write code whose time or space complexity is quadratic (or worse), to make the Bazel server crash with a Java exception or to violate invariants (such as by inadvertently modifying an Options instance or by making a configured target mutable)
The algorithm that determines the direct dependencies of a configured target lives in DependencyResolver.dependentNodeMap().
Configurations are the “how” of building a target: for what platform, with what command line options, etc.
The same target can be built for multiple configurations in the same build. This is useful, for example, when the same code is used for a tool that's run during the build and for the target code and we are cross-compiling or when we are building a fat Android app (one that contains native code for multiple CPU architectures)
Conceptually, the configuration is a BuildOptions instance. However, in practice, BuildOptions is wrapped by BuildConfiguration that provides additional sundry pieces of functionality. It propagates from the top of the dependency graph to the bottom. If it changes, the build needs to be re-analyzed.
This results in anomalies like having to re-analyze the whole build if, for example, the number of requested test runs changes, even though that only affects test targets (we have plans to “trim” configurations so that this is not the case, but it's not ready yet).
When a rule implementation needs part of the configuration, it needs to declare it in its definition using RuleClass.Builder.requiresConfigurationFragments() . This is both to avoid mistakes (such as Python rules using the Java fragment) and to facilitate configuration trimming so that such as if Python options change, C++ targets don't need to be re-analyzed.
The configuration of a rule is not necessarily the same as that of its “parent” rule. The process of changing the configuration in a dependency edge is called a “configuration transition”. It can happen in two places:
Attribute.Builder.cfg() and are functions from a Rule (where the transition happens) and a BuildOptions (the original configuration) to one or more BuildOptions (the output configuration).RuleClass.Builder.cfg().The relevant classes are TransitionFactory and ConfigurationTransition.
Configuration transitions are used, for example:
If a configuration transition results in multiple configurations, it's called a split transition.
Configuration transitions can also be implemented in Starlark (documentation here)
Transitive info providers are a way (and the _only _way) for configured targets to learn things about other configured targets that they depend on, and the only way to tell things about themselves to other configured targets that depend on them. The reason why “transitive” is in their name is that this is usually some sort of roll-up of the transitive closure of a configured target.
There is generally a 1:1 correspondence between Java transitive info providers and Starlark ones (the exception is DefaultInfo which is an amalgamation of FileProvider, FilesToRunProvider and RunfilesProvider because that API was deemed to be more Starlark-ish than a direct transliteration of the Java one). Their key is one of the following things:
TransitiveInfoProvider.build.lib.packages.Info .provider() function and is the recommended way to create new providers. The symbol is represented by a Provider.Key instance in Java.New providers implemented in Java should be implemented using BuiltinProvider. NativeProvider is deprecated (we haven't had time to remove it yet) and TransitiveInfoProvider subclasses cannot be accessed from Starlark.
Configured targets are implemented as RuleConfiguredTargetFactory. There is a subclass for each rule class implemented in Java. Starlark configured targets are created through StarlarkRuleConfiguredTargetUtil.buildRule() .
Configured target factories should use RuleConfiguredTargetBuilder to construct their return value. It consists of the following things:
filesToBuild, the hazy concept of “the set of files this rule represents.” These are the files that get built when the configured target is on the command line or in the srcs of a genrule.OutputGroupInfo provider in Java.Some binaries need data files to run. A prominent example is tests that need input files. This is represented in Bazel by the concept of “runfiles”. A “runfiles tree” is a directory tree of the data files for a particular binary. It is created in the file system as a symlink tree with individual symlinks pointing to the files in the source or output trees.
A set of runfiles is represented as a Runfiles instance. It is conceptually a map from the path of a file in the runfiles tree to the Artifact instance that represents it. It's a little more complicated than a single Map for two reasons:
Runfiles are collected using RunfilesProvider: an instance of this class represents the runfiles a configured target (such as a library) and its transitive closure needs and they are gathered like a nested set (in fact, they are implemented using nested sets under the cover): each target unions the runfiles of its dependencies, adds some of its own, then sends the resulting set upwards in the dependency graph. A RunfilesProvider instance contains two Runfiles instances, one for when the rule is depended on through the “data” attribute and one for every other kind of incoming dependency. This is because a target sometimes presents different runfiles when depended on through a data attribute than otherwise. This is undesired legacy behavior that we haven't gotten around removing yet.
Runfiles of binaries are represented as an instance of RunfilesSupport. This is different from Runfiles because RunfilesSupport has the capability of actually being built (unlike Runfiles, which is just a mapping). This necessitates the following additional components:
RunfilesSupport object represents.Aspects are a way to “propagate computation down the dependency graph”. They are described for users of Bazel here. A good motivating example is protocol buffers: a proto_library rule should not know about any particular language, but building the implementation of a protocol buffer message (the “basic unit” of protocol buffers) in any programming language should be coupled to the proto_library rule so that if two targets in the same language depend on the same protocol buffer, it gets built only once.
Just like configured targets, they are represented in Skyframe as a SkyValue and the way they are constructed is very similar to how configured targets are built: they have a factory class called ConfiguredAspectFactory that has access to a RuleContext, but unlike configured target factories, it also knows about the configured target it is attached to and its providers.
The set of aspects propagated down the dependency graph is specified for each attribute using the Attribute.Builder.aspects() function. There are a few confusingly-named classes that participate in the process:
AspectClass is the implementation of the aspect. It can be either in Java (in which case it‘s a subclass) or in Starlark (in which case it’s an instance of StarlarkAspectClass). It's analogous to RuleConfiguredTargetFactory.AspectDefinition is the definition of the aspect; it includes the providers it requires, the providers it provides and contains a reference to its implementation, such as the appropriate AspectClass instance. It's analogous to RuleClass.AspectParameters is a way to parametrize an aspect that is propagated down the dependency graph. It‘s currently a string to string map. A good example of why it’s useful is protocol buffers: if a language has multiple APIs, the information as to which API the protocol buffers should be built for should be propagated down the dependency graph.Aspect represents all the data that's needed to compute an aspect that propagates down the dependency graph. It consists of the aspect class, its definition and its parameters.RuleAspect is the function that determines which aspects a particular rule should propagate. It's a Rule -> Aspect function.A somewhat unexpected complication is that aspects can attach to other aspects; for example, an aspect collecting the classpath for a Java IDE will probably want to know about all the .jar files on the classpath, but some of them are protocol buffers. In that case, the IDE aspect will want to attach to the (proto_library rule + Java proto aspect) pair.
The complexity of aspects on aspects is captured in the class AspectCollection.
Bazel supports multi-platform builds, that is, builds where there may be multiple architectures where build actions run and multiple architectures for which code is built. These architectures are referred to as platforms in Bazel parlance (full documentation here)
A platform is described by a key-value mapping from constraint settings (such as the concept of “CPU architecture”) to constraint values (such as a particular CPU like x86_64). We have a “dictionary” of the most commonly used constraint settings and values in the @platforms repository.
The concept of toolchain comes from the fact that depending on what platforms the build is running on and what platforms are targeted, one may need to use different compilers; for example, a particular C++ toolchain may run on a specific OS and be able to target some other OSes. Bazel must determine the C++ compiler that is used based on the set execution and target platform (documentation for toolchains here).
In order to do this, toolchains are annotated with the set of execution and target platform constraints they support. In order to do this, the definition of a toolchain are split into two parts:
toolchain() rule that describes the set of execution and target constraints a toolchain supports and tells what kind (such as C++ or Java) of toolchain it is (the latter is represented by the toolchain_type() rule)cc_toolchain())This is done in this way because we need to know the constraints for every toolchain in order to do toolchain resolution and language-specific *_toolchain() rules contain much more information than that, so they take more time to load.
Execution platforms are specified in one of the following ways:
register_execution_platforms() functionThe set of available execution platforms is computed in RegisteredExecutionPlatformsFunction .
The target platform for a configured target is determined by PlatformOptions.computeTargetPlatform() . It‘s a list of platforms because we eventually want to support multiple target platforms, but it’s not implemented yet.
The set of toolchains to be used for a configured target is determined by ToolchainResolutionFunction. It is a function of:
UnloadedToolchainContextKey)exec_compatible_with attribute) and the configuration (--experimental_add_exec_constraints_to_targets), in UnloadedToolchainContextKeyIts result is an UnloadedToolchainContext, which is essentially a map from toolchain type (represented as a ToolchainTypeInfo instance) to the label of the selected toolchain. It's called “unloaded” because it does not contain the toolchains themselves, only their labels.
Then the toolchains are actually loaded using ResolvedToolchainContext.load() and used by the implementation of the configured target that requested them.
We also have a legacy system that relies on there being one single “host” configuration and target configurations being represented by various configuration flags, such as --cpu . We are gradually transitioning to the above system. In order to handle cases where people rely on the legacy configuration values, we have implemented platform mappings{: .external} to translate between the legacy flags and the new-style platform constraints. Their code is in PlatformMappingFunction and uses a non-Starlark “little language”.
Sometimes one wants to designate a target as being compatible with only a few platforms. Bazel has (unfortunately) multiple mechanisms to achieve this end:
environment_group() / environment()Rule-specific constraints are mostly used within Google for Java rules; they are on their way out and they are not available in Bazel, but the source code may contain references to it. The attribute that governs this is called constraints= .
These rules are a legacy mechanism and are not widely used.
All build rules can declare which “environments” they can be built for, where an “environment” is an instance of the environment() rule.
There are various ways supported environments can be specified for a rule:
restricted_to= attribute. This is the most direct form of specification; it declares the exact set of environments the rule supports.compatible_with= attribute. This declares environments a rule supports in addition to “standard” environments that are supported by default.default_restricted_to= and default_compatible_with=.environment_group() rules. Every environment belongs to a group of thematically related peers (such as “CPU architectures”, “JDK versions” or “mobile operating systems”). The definition of an environment group includes which of these environments should be supported by “default” if not otherwise specified by the restricted_to= / environment() attributes. A rule with no such attributes inherits all defaults.*_test rules testable without each instance having to explicitly declare this capability.environment() is implemented as a regular rule whereas environment_group() is both a subclass of Target but not Rule (EnvironmentGroup) and a function that is available by default from Starlark (StarlarkLibrary.environmentGroup()) which eventually creates an eponymous target. This is to avoid a cyclic dependency that would arise because each environment needs to declare the environment group it belongs to and each environment group needs to declare its default environments.
A build can be restricted to a certain environment with the --target_environment command line option.
The implementation of the constraint check is in RuleContextConstraintSemantics and TopLevelConstraintSemantics.
The current “official” way to describe what platforms a target is compatible with is by using the same constraints used to describe toolchains and platforms. It was implemented in pull request #10945{: .external}.
If you work on a large codebase with a lot of developers (like at Google), you want to take care to prevent everyone else from arbitrarily depending on your code. Otherwise, as per Hyrum's law{: .external}, people will come to rely on behaviors that you considered to be implementation details.
Bazel supports this by the mechanism called visibility: you can limit which targets can depend on a particular target using the visibility attribute. This attribute is a little special because, although it holds a list of labels, these labels may encode a pattern over package names rather than a pointer to any particular target. (Yes, this is a design flaw.)
This is implemented in the following places:
RuleVisibility interface represents a visibility declaration. It can be either a constant (fully public or fully private) or a list of labels.//pkg:__pkg__) or subtrees of packages (//pkg:__subpackages__). This is different from the command line syntax, which uses //pkg:* or //pkg/....PackageGroup) and configured target (PackageGroupConfiguredTarget). We could probably replace these with simple rules if we wanted to. Their logic is implemented with the help of: PackageSpecification, which corresponds to a single pattern like //pkg/...; PackageGroupContents, which corresponds to a single package_group's packages attribute; and PackageSpecificationProvider, which aggregates over a package_group and its transitive includes.DependencyResolver.visitTargetVisibility and a few other miscellaneous places.CommonPrerequisiteValidator.validateDirectPrerequisiteVisibility()Oftentimes, a configured target aggregates a set of files from its dependencies, adds its own, and wraps the aggregate set into a transitive info provider so that configured targets that depend on it can do the same. Examples:
cc_libraryIf we did this the naive way by using, for example, List or Set, we‘d end up with quadratic memory usage: if there is a chain of N rules and each rule adds a file, we’d have 1+2+...+N collection members.
In order to get around this problem, we came up with the concept of a NestedSet. It‘s a data structure that is composed of other NestedSet instances and some members of its own, thereby forming a directed acyclic graph of sets. They are immutable and their members can be iterated over. We define multiple iteration order (NestedSet.Order): preorder, postorder, topological (a node always comes after its ancestors) and "don’t care, but it should be the same each time".
The same data structure is called depset in Starlark.
The actual build consists of a set of commands that need to be run to produce the output the user wants. The commands are represented as instances of the class Action and the files are represented as instances of the class Artifact. They are arranged in a bipartite, directed, acyclic graph called the “action graph”.
Artifacts come in two kinds: source artifacts (ones that are available before Bazel starts executing) and derived artifacts (ones that need to be built). Derived artifacts can themselves be multiple kinds:
TreeArtifact.There is no fundamental reason why source artifacts cannot be tree artifacts or unresolved symlink artifacts, it‘s just that we haven’t implemented it yet (we should, though -- referencing a source directory in a BUILD file is one of the few known long-standing incorrectness issues with Bazel; we have an implementation that kind of works which is enabled by the BAZEL_TRACK_SOURCE_DIRECTORIES=1 JVM property)
A notable kind of Artifact are middlemen. They are indicated by Artifact instances that are the outputs of MiddlemanAction. They are used for one special case:
Actions are best understood as a command that needs to be run, the environment it needs and the set of outputs it produces. The following things are the main components of the description of an action:
There are also a few other special cases, like writing a file whose content is known to Bazel. They are a subclass of AbstractAction. Most of the actions are a SpawnAction or a StarlarkAction (the same, they should arguably not be separate classes), although Java and C++ have their own action types (JavaCompileAction, CppCompileAction and CppLinkAction).
We eventually want to move everything to SpawnAction; JavaCompileAction is pretty close, but C++ is a bit of a special-case due to .d file parsing and include scanning.
The action graph is mostly “embedded” into the Skyframe graph: conceptually, the execution of an action is represented as an invocation of ActionExecutionFunction. The mapping from an action graph dependency edge to a Skyframe dependency edge is described in ActionExecutionFunction.getInputDeps() and Artifact.key() and has a few optimizations in order to keep the number of Skyframe edges low:
SkyValues. Instead, Artifact.getGeneratingActionKey() is used to find out the key for the action that generates itSome actions are generated by multiple configured targets; Starlark rules are more limited since they are only allowed to put their derived actions into a directory determined by their configuration and their package (but even so, rules in the same package can conflict), but rules implemented in Java can put derived artifacts anywhere.
This is considered to be a misfeature, but getting rid of it is really hard because it produces significant savings in execution time when, for example, a source file needs to be processed somehow and that file is referenced by multiple rules (handwave-handwave). This comes at the cost of some RAM: each instance of a shared action needs to be stored in memory separately.
If two actions generate the same output file, they must be exactly the same: have the same inputs, the same outputs and run the same command line. This equivalence relation is implemented in Actions.canBeShared() and it is verified between the analysis and execution phases by looking at every Action. This is implemented in SkyframeActionExecutor.findAndStoreArtifactConflicts() and is one of the few places in Bazel that requires a “global” view of the build.
This is when Bazel actually starts running build actions, such as commands that produce outputs.
The first thing Bazel does after the analysis phase is to determine what Artifacts need to be built. The logic for this is encoded in TopLevelArtifactHelper; roughly speaking, it's the filesToBuild of the configured targets on the command line and the contents of a special output group for the explicit purpose of expressing “if this target is on the command line, build these artifacts”.
The next step is creating the execution root. Since Bazel has the option to read source packages from different locations in the file system (--package_path), it needs to provide locally executed actions with a full source tree. This is handled by the class SymlinkForest and works by taking note of every target used in the analysis phase and building up a single directory tree that symlinks every package with a used target from its actual location. An alternative would be to pass the correct paths to commands (taking --package_path into account). This is undesirable because:
--package_path is slowly and steadily being deprecatedThen, Bazel starts traversing the action graph (the bipartite, directed graph composed of actions and their input and output artifacts) and running actions. The execution of each action is represented by an instance of the SkyValue class ActionExecutionValue.
Since running an action is expensive, we have a few layers of caching that can be hit behind Skyframe:
ActionExecutionFunction.stateMap contains data to make Skyframe restarts of ActionExecutionFunction cheapThis cache is another layer that sits behind Skyframe; even if an action is re-executed in Skyframe, it can still be a hit in the local action cache. It represents the state of the local file system and it's serialized to disk which means that when one starts up a new Bazel server, one can get local action cache hits even though the Skyframe graph is empty.
This cache is checked for hits using the method ActionCacheChecker.getTokenIfNeedToExecute() .
Contrary to its name, it's a map from the path of a derived artifact to the action that emitted it. The action is described as:
FileWriteAction, it’s the checksum of the data that's written)There is also a highly experimental “top-down action cache” that is still under development, which uses transitive hashes to avoid going to the cache as many times.
Some actions are more complicated than just having a set of inputs. Changes to the set of inputs of an action come in two forms:
#include statements (we overestimate so that we don't need to implement a full C preprocessor) This option is currently hard-wired to “false” in Bazel and is only used at Google.These are implemented using methods on Action:
Action.discoverInputs() is called. It should return a nested set of Artifacts that are determined to be required. These must be source artifacts so that there are no dependency edges in the action graph that don't have an equivalent in the configured target graph.Action.execute().Action.execute(), the action can call Action.updateInputs() to tell Bazel that not all of its inputs were needed. This can result in incorrect incremental builds if a used input is reported as unused.When an action cache returns a hit on a fresh Action instance (such as created after a server restart), Bazel calls updateInputs() itself so that the set of inputs reflects the result of input discovery and pruning done before.
Starlark actions can make use of the facility to declare some inputs as unused using the unused_inputs_list= argument of ctx.actions.run().
Some actions can be run in different ways. For example, a command line can be executed locally, locally but in various kinds of sandboxes, or remotely. The concept that embodies this is called an ActionContext (or Strategy, since we successfully went only halfway with a rename...)
The life cycle of an action context is as follows:
BlazeModule instances are asked what action contexts they have. This happens in the constructor of ExecutionTool. Action context types are identified by a Java Class instance that refers to a sub-interface of ActionContext and which interface the action context must implement.ActionExecutionContext and BlazeExecutor .ActionExecutionContext.getContext() and BlazeExecutor.getStrategy() (there should really be only one way to do it…)Strategies are free to call other strategies to do their jobs; this is used, for example, in the dynamic strategy that starts actions both locally and remotely, then uses whichever finishes first.
One notable strategy is the one that implements persistent worker processes (WorkerSpawnStrategy). The idea is that some tools have a long startup time and should therefore be reused between actions instead of starting one anew for every action (This does represent a potential correctness issue, since Bazel relies on the promise of the worker process that it doesn't carry observable state between individual requests)
If the tool changes, the worker process needs to be restarted. Whether a worker can be reused is determined by computing a checksum for the tool used using WorkerFilesHash. It relies on knowing which inputs of the action represent part of the tool and which represent inputs; this is determined by the creator of the Action: Spawn.getToolFiles() and the runfiles of the Spawn are counted as parts of the tool.
More information about strategies (or action contexts!):
Bazel can run many actions in parallel. The number of local actions that should be run in parallel differs from action to action: the more resources an action requires, the less instances should be running at the same time to avoid overloading the local machine.
This is implemented in the class ResourceManager: each action has to be annotated with an estimate of the local resources it requires in the form of a ResourceSet instance (CPU and RAM). Then when action contexts do something that requires local resources, they call ResourceManager.acquireResources() and are blocked until the required resources are available.
A more detailed description of local resource management is available here.
Each action requires a separate place in the output directory where it places its outputs. The location of derived artifacts is usually as follows:
$EXECROOT/bazel-out/<configuration>/bin/<package>/<artifact name>
How is the name of the directory that is associated with a particular configuration determined? There are two conflicting desirable properties:
So far, we have not come up with a principled way of solving this problem, which has similarities to the problem of configuration trimming. A longer discussion of options is available here{: .external}. The main problematic areas are Starlark rules (whose authors usually aren't intimately familiar with Bazel) and aspects, which add another dimension to the space of things that can produce the “same” output file.
The current approach is that the path segment for the configuration is <CPU>-<compilation mode> with various suffixes added so that configuration transitions implemented in Java don‘t result in action conflicts. In addition, a checksum of the set of Starlark configuration transitions is added so that users can’t cause action conflicts. It is far from perfect. This is implemented in OutputDirectories.buildMnemonic() and relies on each configuration fragment adding its own part to the name of the output directory.
Bazel has rich support for running tests. It supports:
Tests are regular configured targets that have a TestProvider, which describes how the test should be run:
TestResultData messageDetermining which tests are run is an elaborate process.
First, during target pattern parsing, test suites are recursively expanded. The expansion is implemented in TestsForTargetPatternFunction. A somewhat surprising wrinkle is that if a test suite declares no tests, it refers to every test in its package. This is implemented in Package.beforeBuild() by adding an implicit attribute called $implicit_tests to test suite rules.
Then, tests are filtered for size, tags, timeout and language according to the command line options. This is implemented in TestFilter and is called from TargetPatternPhaseFunction.determineTests() during target parsing and the result is put into TargetPatternPhaseValue.getTestsToRunLabels(). The reason why rule attributes which can be filtered for are not configurable is that this happens before the analysis phase, therefore, the configuration is not available.
This is then processed further in BuildView.createResult(): targets whose analysis failed are filtered out and tests are split into exclusive and non-exclusive tests. It's then put into AnalysisResult, which is how ExecutionTool knows which tests to run.
In order to lend some transparency to this elaborate process, the tests() query operator (implemented in TestsFunction) is available to tell which tests are run when a particular target is specified on the command line. It's unfortunately a reimplementation, so it probably deviates from the above in multiple subtle ways.
The way the tests are run is by requesting cache status artifacts. This then results in the execution of a TestRunnerAction, which eventually calls the TestActionContext chosen by the --test_strategy command line option that runs the test in the requested way.
Tests are run according to an elaborate protocol that uses environment variables to tell tests what's expected from them. A detailed description of what Bazel expects from tests and what tests can expect from Bazel is available here. At the simplest, an exit code of 0 means success, anything else means failure.
In addition to the cache status file, each test process emits a number of other files. They are put in the “test log directory” which is the subdirectory called testlogs of the output directory of the target configuration:
test.xml, a JUnit-style XML file detailing the individual test cases in the test shardtest.log, the console output of the test. stdout and stderr are not separated.test.outputs, the “undeclared outputs directory”; this is used by tests that want to output files in addition to what they print to the terminal.There are two things that can happen during test execution that cannot during building regular targets: exclusive test execution and output streaming.
Some tests need to be executed in exclusive mode, for example not in parallel with other tests. This can be elicited either by adding tags=["exclusive"] to the test rule or running the test with --test_strategy=exclusive . Each exclusive test is run by a separate Skyframe invocation requesting the execution of the test after the “main” build. This is implemented in SkyframeExecutor.runExclusiveTest().
Unlike regular actions, whose terminal output is dumped when the action finishes, the user can request the output of tests to be streamed so that they get informed about the progress of a long-running test. This is specified by the --test_output=streamed command line option and implies exclusive test execution so that outputs of different tests are not interspersed.
This is implemented in the aptly-named StreamedTestOutput class and works by polling changes to the test.log file of the test in question and dumping new bytes to the terminal where Bazel rules.
Results of the executed tests are available on the event bus by observing various events (such as TestAttempt, TestResult or TestingCompleteEvent). They are dumped to the Build Event Protocol and they are emitted to the console by AggregatingTestListener.
Coverage is reported by the tests in LCOV format in the files bazel-testlogs/$PACKAGE/$TARGET/coverage.dat .
To collect coverage, each test execution is wrapped in a script called collect_coverage.sh .
This script sets up the environment of the test to enable coverage collection and determine where the coverage files are written by the coverage runtime(s). It then runs the test. A test may itself run multiple subprocesses and consist of parts written in multiple different programming languages (with separate coverage collection runtimes). The wrapper script is responsible for converting the resulting files to LCOV format if necessary, and merges them into a single file.
The interposition of collect_coverage.sh is done by the test strategies and requires collect_coverage.sh to be on the inputs of the test. This is accomplished by the implicit attribute :coverage_support which is resolved to the value of the configuration flag --coverage_support (see TestConfiguration.TestOptions.coverageSupport)
Some languages do offline instrumentation, meaning that the coverage instrumentation is added at compile time (such as C++) and others do online instrumentation, meaning that coverage instrumentation is added at execution time.
Another core concept is baseline coverage. This is the coverage of a library, binary, or test if no code in it was run. The problem it solves is that if you want to compute the test coverage for a binary, it is not enough to merge the coverage of all of the tests because there may be code in the binary that is not linked into any test. Therefore, what we do is to emit a coverage file for every binary which contains only the files we collect coverage for with no covered lines. The baseline coverage file for a target is at bazel-testlogs/$PACKAGE/$TARGET/baseline_coverage.dat . It is also generated for binaries and libraries in addition to tests if you pass the --nobuild_tests_only flag to Bazel.
Baseline coverage is currently broken.
We track two groups of files for coverage collection for each rule: the set of instrumented files and the set of instrumentation metadata files.
The set of instrumented files is just that, a set of files to instrument. For online coverage runtimes, this can be used at runtime to decide which files to instrument. It is also used to implement baseline coverage.
The set of instrumentation metadata files is the set of extra files a test needs to generate the LCOV files Bazel requires from it. In practice, this consists of runtime-specific files; for example, gcc emits .gcno files during compilation. These are added to the set of inputs of test actions if coverage mode is enabled.
Whether or not coverage is being collected is stored in the BuildConfiguration. This is handy because it is an easy way to change the test action and the action graph depending on this bit, but it also means that if this bit is flipped, all targets need to be re-analyzed (some languages, such as C++ require different compiler options to emit code that can collect coverage, which mitigates this issue somewhat, since then a re-analysis is needed anyway).
The coverage support files are depended on through labels in an implicit dependency so that they can be overridden by the invocation policy, which allows them to differ between the different versions of Bazel. Ideally, these differences would be removed, and we standardized on one of them.
We also generate a “coverage report” which merges the coverage collected for every test in a Bazel invocation. This is handled by CoverageReportActionFactory and is called from BuildView.createResult() . It gets access to the tools it needs by looking at the :coverage_report_generator attribute of the first test that is executed.
Bazel has a little language used to ask it various things about various graphs. The following query kinds are provided:
bazel query is used to investigate the target graphbazel cquery is used to investigate the configured target graphbazel aquery is used to investigate the action graphEach of these is implemented by subclassing AbstractBlazeQueryEnvironment. Additional additional query functions can be done by subclassing QueryFunction . In order to allow streaming query results, instead of collecting them to some data structure, a query2.engine.Callback is passed to QueryFunction, which calls it for results it wants to return.
The result of a query can be emitted in various ways: labels, labels and rule classes, XML, protobuf and so on. These are implemented as subclasses of OutputFormatter.
A subtle requirement of some query output formats (proto, definitely) is that Bazel needs to emit _all _the information that package loading provides so that one can diff the output and determine whether a particular target has changed. As a consequence, attribute values need to be serializable, which is why there are only so few attribute types without any attributes having complex Starlark values. The usual workaround is to use a label, and attach the complex information to the rule with that label. It's not a very satisfying workaround and it would be very nice to lift this requirement.
Bazel can be extended by adding modules to it. Each module must subclass BlazeModule (the name is a relic of the history of Bazel when it used to be called Blaze) and gets information about various events during the execution of a command.
They are mostly used to implement various pieces of “non-core” functionality that only some versions of Bazel (such as the one we use at Google) need:
The set of extension points BlazeModule offers is somewhat haphazard. Don't use it as an example of good design principles.
The main way BlazeModules communicate with the rest of Bazel is by an event bus (EventBus): a new instance is created for every build, various parts of Bazel can post events to it and modules can register listeners for the events they are interested in. For example, the following things are represented as events:
TargetParsingCompleteEvent)BuildConfigurationEvent)TargetCompleteEvent)TestAttempt, TestSummary)Some of these events are represented outside of Bazel in the Build Event Protocol (they are BuildEvents). This allows not only BlazeModules, but also things outside the Bazel process to observe the build. They are accessible either as a file that contains protocol messages or Bazel can connect to a server (called the Build Event Service) to stream events.
This is implemented in the build.lib.buildeventservice and build.lib.buildeventstream Java packages.
Note: The information in this section is out of date, as code in this area has undergone extensive change in the past couple of years. Please refer to external dependencies overview for more up-to-date information.
Whereas Bazel was originally designed to be used in a monorepo (a single source tree containing everything one needs to build), Bazel lives in a world where this is not necessarily true. “External repositories” are an abstraction used to bridge these two worlds: they represent code that is necessary for the build but is not in the main source tree.
The set of external repositories is determined by parsing the WORKSPACE file. For example, a declaration like this:
local_repository(name="foo", path="/foo/bar")
Results in the repository called @foo being available. Where this gets complicated is that one can define new repository rules in Starlark files, which can then be used to load new Starlark code, which can be used to define new repository rules and so on…
To handle this case, the parsing of the WORKSPACE file (in WorkspaceFileFunction) is split up into chunks delineated by load() statements. The chunk index is indicated by WorkspaceFileKey.getIndex() and computing WorkspaceFileFunction until index X means evaluating it until the Xth load() statement.
Before the code of the repository is available to Bazel, it needs to be fetched. This results in Bazel creating a directory under $OUTPUT_BASE/external/<repository name>.
Fetching the repository happens in the following steps:
PackageLookupFunction realizes that it needs a repository and creates a RepositoryName as a SkyKey, which invokes RepositoryLoaderFunctionRepositoryLoaderFunction forwards the request to RepositoryDelegatorFunction for unclear reasons (the code says it‘s to avoid re-downloading things in case of Skyframe restarts, but it’s not a very solid reasoning)RepositoryDelegatorFunction finds out the repository rule it's asked to fetch by iterating over the chunks of the WORKSPACE file until the requested repository is foundRepositoryFunction is found that implements the repository fetching; it's either the Starlark implementation of the repository or a hard-coded map for repositories that are implemented in Java.There are various layers of caching since fetching a repository can be very expensive:
RepositoryCache). This requires the checksum to be available in the WORKSPACE file, but that's good for hermeticity anyway. This is shared by every Bazel server instance on the same workstation, regardless of which workspace or output base they are running in.$OUTPUT_BASE/external that contains a checksum of the rule that was used to fetch it. If the Bazel server restarts but the checksum does not change, it's not re-fetched. This is implemented in RepositoryDelegatorFunction.DigestWriter .--distdir command line option designates another cache that is used to look up artifacts to be downloaded. This is useful in enterprise settings where Bazel should not fetch random things from the Internet. This is implemented by DownloadManager .Once a repository is downloaded, the artifacts in it are treated as source artifacts. This poses a problem because Bazel usually checks for up-to-dateness of source artifacts by calling stat() on them, and these artifacts are also invalidated when the definition of the repository they are in changes. Thus, FileStateValues for an artifact in an external repository need to depend on their external repository. This is handled by ExternalFilesHelper.
It can happen that multiple repositories want to depend on the same repository, but in different versions (this is an instance of the “diamond dependency problem”). For example, if two binaries in separate repositories in the build want to depend on Guava, they will presumably both refer to Guava with labels starting @guava// and expect that to mean different versions of it.
Therefore, Bazel allows one to re-map external repository labels so that the string @guava// can refer to one Guava repository (such as @guava1//) in the repository of one binary and another Guava repository (such as @guava2//) the repository of the other.
Alternatively, this can also be used to join diamonds. If a repository depends on @guava1//, and another depends on @guava2//, repository mapping allows one to re-map both repositories to use a canonical @guava// repository.
The mapping is specified in the WORKSPACE file as the repo_mapping attribute of individual repository definitions. It then appears in Skyframe as a member of WorkspaceFileValue, where it is plumbed to:
Package.Builder.repositoryMapping which is used to transform label-valued attributes of rules in the package by RuleClass.populateRuleAttributeValues()Package.repositoryMapping which is used in the analysis phase (for resolving things like $(location) which are not parsed in the loading phase)BzlLoadFunction for resolving labels in load() statementsThe server of Bazel is mostly written in Java. The exception is the parts that Java cannot do by itself or couldn't do by itself when we implemented it. This is mostly limited to interaction with the file system, process control and various other low-level things.
The C++ code lives under src/main/native and the Java classes with native methods are:
NativePosixFiles and NativePosixFileSystemProcessUtilsWindowsFileOperations and WindowsFileProcessescom.google.devtools.build.lib.platformEmitting console output seems like a simple thing, but the confluence of running multiple processes (sometimes remotely), fine-grained caching, the desire to have a nice and colorful terminal output and having a long-running server makes it non-trivial.
Right after the RPC call comes in from the client, two RpcOutputStream instances are created (for stdout and stderr) that forward the data printed into them to the client. These are then wrapped in an OutErr (an (stdout, stderr) pair). Anything that needs to be printed on the console goes through these streams. Then these streams are handed over to BlazeCommandDispatcher.execExclusively().
Output is by default printed with ANSI escape sequences. When these are not desired (--color=no), they are stripped by an AnsiStrippingOutputStream. In addition, System.out and System.err are redirected to these output streams. This is so that debugging information can be printed using System.err.println() and still end up in the terminal output of the client (which is different from that of the server). Care is taken that if a process produces binary output (such as bazel query --output=proto), no munging of stdout takes place.
Short messages (errors, warnings and the like) are expressed through the EventHandler interface. Notably, these are different from what one posts to the EventBus (this is confusing). Each Event has an EventKind (error, warning, info, and a few others) and they may have a Location (the place in the source code that caused the event to happen).
Some EventHandler implementations store the events they received. This is used to replay information to the UI caused by various kinds of cached processing, for example, the warnings emitted by a cached configured target.
Some EventHandlers also allow posting events that eventually find their way to the event bus (regular Events do _not _appear there). These are implementations of ExtendedEventHandler and their main use is to replay cached EventBus events. These EventBus events all implement Postable, but not everything that is posted to EventBus necessarily implements this interface; only those that are cached by an ExtendedEventHandler (it would be nice and most of the things do; it's not enforced, though)
Terminal output is mostly emitted through UiEventHandler, which is responsible for all the fancy output formatting and progress reporting Bazel does. It has two inputs:
The only direct connection the command execution machinery (for example the rest of Bazel) has to the RPC stream to the client is through Reporter.getOutErr(), which allows direct access to these streams. It's only used when a command needs to dump large amounts of possible binary data (such as bazel query).
Bazel is fast. Bazel is also slow, because builds tend to grow until just the edge of what‘s bearable. For this reason, Bazel includes a profiler which can be used to profile builds and Bazel itself. It’s implemented in a class that‘s aptly named Profiler. It’s turned on by default, although it records only abridged data so that its overhead is tolerable; The command line --record_full_profiler_data makes it record everything it can.
It emits a profile in the Chrome profiler format; it‘s best viewed in Chrome. It’s data model is that of task stacks: one can start tasks and end tasks and they are supposed to be neatly nested within each other. Each Java thread gets its own task stack. TODO: How does this work with actions and continuation-passing style?
The profiler is started and stopped in BlazeRuntime.initProfiler() and BlazeRuntime.afterCommand() respectively and attempts to be live for as long as possible so that we can profile everything. To add something to the profile, call Profiler.instance().profile(). It returns a Closeable, whose closure represents the end of the task. It's best used with try-with-resources statements.
We also do rudimentary memory profiling in MemoryProfiler. It's also always on and it mostly records maximum heap sizes and GC behavior.
Bazel has two main kinds of tests: ones that observe Bazel as a “black box” and ones that only run the analysis phase. We call the former “integration tests” and the latter “unit tests”, although they are more like integration tests that are, well, less integrated. We also have some actual unit tests, where they are necessary.
Of integration tests, we have two kinds:
src/test/shellBuildIntegrationTestCaseBuildIntegrationTestCase is the preferred integration testing framework as it is well-equipped for most testing scenarios. As it is a Java framework, it provides debuggability and seamless integration with many common development tools. There are many examples of BuildIntegrationTestCase classes in the Bazel repository.
Analysis tests are implemented as subclasses of BuildViewTestCase. There is a scratch file system you can use to write BUILD files, then various helper methods can request configured targets, change the configuration and assert various things about the result of the analysis.