#!/bin/bash
# Copyright 2018 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Tests of the bazel client.

CURRENT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
source "${CURRENT_DIR}/../integration_test_setup.sh" \
  || { echo "integration_test_setup.sh not found!" >&2; exit 1; }


#### TESTS #############################################################

function test_client_debug() {
  # Test that --client_debug sends log statements to stderr.
  bazel --client_debug version >&$TEST_log || fail "'bazel version' failed"
  expect_log "Debug logging requested"
  bazel --client_debug --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_log "Debug logging requested"

  # Test that --client_debug can be disabled
  bazel --noclient_debug version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
  bazel --noclient_debug --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"

  # Test that --client_debug is off by default.
  bazel --ignore_all_rc_files version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
  bazel  --ignore_all_rc_files --batch version >&$TEST_log || fail "'bazel version' failed"
  expect_not_log "Debug logging requested"
}

function test_client_debug_change_does_not_restart_server() {
  local server_pid1=$(bazel --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_server_restart_due_to_startup_options() {
  local server_pid1=$(bazel --write_command_log info server_pid 2>$TEST_log)
  local server_pid2=$(bazel --nowrite_command_log info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2" # pid changed.
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_multiple_requests_same_server() {
  local server_pid1=$(bazel info server_pid 2>$TEST_log)
  local server_pid2=$(bazel info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_no_server_restart_if_options_order_changes() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dbar \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args=-Dbar \
                      --host_jvm_args=-Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_server_restart_if_number_of_option_instances_increases() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args -Dfoo \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the current request that were not included when creating the server:"
  expect_log "\\[INFO .*\\]   --host_jvm_args=-Dfoo"
}

function test_server_restart_if_number_of_option_instances_decreases() {
  local server_pid1=$(bazel \
                      --host_jvm_args=-Dfoo \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  local server_pid2=$(bazel \
                      --host_jvm_args -Dfoo \
                      --client_debug info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the running server that are not included in the current request:"
  expect_log "\\[INFO .*\\]   --host_jvm_args=-Dfoo"
}

function test_server_not_restarted_when_only_TMPDIR_changes() {
  mkdir tmp1
  mkdir tmp2
  tmp1path="$(pwd)/tmp1"
  tmp2path="$(pwd)/tmp2"
  PID1=$(export TMPDIR="$tmp1path" && bazel info server_pid 2>$TEST_log) \
     || fail "bazel info failed"
  PID2=$(export TMPDIR="$tmp2path" && bazel info server_pid 2>$TEST_log) \
     || fail "bazel info failed"
  expect_not_log "Running B\\(azel\\|laze\\) server needs to be killed."

  assert_equals "$PID1" "$PID2"
}

function test_server_restarted_on_explicit_heap_dump_path_change() {
  mkdir tmp1
  mkdir tmp2
  tmp1path="$(pwd)/tmp1"
  tmp2path="$(pwd)/tmp2"
  PID1=$(bazel --host_jvm_args=-XX:HeapDumpPath="$tmp1path" info server_pid \
     2>$TEST_log) || fail "bazel info failed"
  PID2=$(bazel --host_jvm_args=-XX:HeapDumpPath="$tmp2path" info server_pid \
     2>$TEST_log) || fail "bazel info failed"
  expect_log "Running B\\(azel\\|laze\\) server needs to be killed."

  assert_not_equals "$PID1" "$PID2"
}

function test_shutdown() {
  local server_pid1=$(bazel info server_pid 2>$TEST_log)
  bazel shutdown >& $TEST_log || fail "Expected success"
  local server_pid2=$(bazel info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "Starting local B\\(azel\\|laze\\) server and connecting to it"
}

function test_shutdown_different_options() {
  bazel --host_jvm_args=-Di.am.a=teapot info >& $TEST_log || fail "Expected success"
  bazel shutdown >& $TEST_log || fail "Expected success"
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
  expect_not_log "Starting local B\\(azel\\|laze\\) server and connecting to it"
}

function test_server_restart_due_to_startup_options_with_client_debug_information() {
  # Using --write_command_log for no particular reason, if that flag is removed, another startup
  # option will do just fine.
  local server_pid1=$(bazel --client_debug --write_command_log info server_pid 2>$TEST_log)
  local server_pid2=$(bazel --client_debug --nowrite_command_log info server_pid 2>$TEST_log)
  assert_not_equals "$server_pid1" "$server_pid2" # pid changed.
  expect_log "\\[WARNING .*\\] Running B\\(azel\\|laze\\) server needs to be killed"
  expect_log "\\[INFO .*\\] Args from the running server that are not included in the current request:"
  expect_log "\\[INFO .*\\]   --write_command_log"
  expect_log "\\[INFO .*\\] Args from the current request that were not included when creating the server:"
  expect_log "\\[INFO .*\\]   --nowrite_command_log"
}

function test_exit_code() {
  bazel query not_a_query >/dev/null &>$TEST_log &&
      fail "bazel query: expected nonzero exit"
  expect_log "'not_a_query'"
}

function test_output_base() {
  out=$(bazel --output_base=$TEST_TMPDIR/output info output_base 2>$TEST_log)
  assert_equals $TEST_TMPDIR/output "$out"
}

function test_output_base_is_file() {
  bazel --output_base=/dev/null &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/dev/null' could not be created.*exists"
}

function test_cannot_create_output_base() {
  bazel --output_base=/foo &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/foo' could not be created"
}

function test_nonwritable_output_base() {
  bazel --output_base=/ &>$TEST_log && fail "Expected non-zero exit"
  expect_log "FATAL.* Output base directory '/' must be readable and writable."
}

function test_install_base_races_dont_leave_temp_files() {
  declare -a client_pids
  for i in {1..3}; do
    bazel --install_base="$TEST_TMPDIR/race/install" \
        --output_base="$TEST_TMPDIR/out$i" info install_base &
    client_pids+=($!)
  done
  for pid in "${client_pids[@]}"; do
    wait $pid
  done
  # Expect "install" to be the only thing in the "race" directory.
  assert_equals "install" "$(ls "$TEST_TMPDIR/race/")"
}

function test_no_arguments() {
  bazel >&$TEST_log || fail "Expected zero exit"
  expect_log "Usage: b\\(laze\\|azel\\)"
}

function test_local_startup_timeout() {
  local output_base=$(bazel info output_base 2>"$TEST_log") ||
    fail "bazel info failed"

  # --host-jvm_debug will cause the server to block, forcing the client
  # into the timeout condition.
  bazel --host_jvm_args="-agentlib:jdwp=transport=dt_socket,server=y,suspend=y,address=localhost:41687" \
      --local_startup_timeout_secs=1 2>"$TEST_log" &
  local timeout=20
  while true; do
    local jobs_output=$(jobs)
    [[ $jobs_output =~ Exit ]] && break
    [[ $jobs_output =~ Done ]] && fail "bazel should have exited non-zero"

    timeout="$(( ${timeout} - 1 ))"
    [[ "${timeout}" -gt 0 ]] || {
      kill -9 %1
      wait %1
      fail "--local_startup_timeout_secs was not respected"
    }
    # Wait for the client to exit.
    sleep 1
  done

  expect_log "Starting local.*server and connecting to it"
  expect_log "FATAL: couldn't connect to server"
}

function test_max_idle_secs() {
  # TODO(https://github.com/bazelbuild/bazel/issues/6773): Remove when fixed.
  bazel shutdown

  local options=( --max_idle_secs=1 )

  local output_base
  output_base="$(bazel "${options[@]}" info output_base 2>"$TEST_log")" \
    || fail "bazel info failed"
  local timeout=60  # Lower than the default --max_idle_secs.
  while [[ -f "${output_base}/server/server.pid.txt" ]]; do
    timeout="$(( ${timeout} - 1 ))"
    [[ "${timeout}" -gt 0 ]] || fail "--max_idle_secs was not respected"

    # Wait for the server to go away.
    sleep 1
  done

  bazel "${options[@]}" info >"$TEST_log" 2>&1 || fail "bazel info failed"
  expect_log "Starting local.*server and connecting to it"
  # Ensure the restart was not triggered by different startup options.
  expect_not_log "WARNING: Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_dashdash_before_command() {
  bazel -- info &>$TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 $exitcode
  expect_log "\\[FATAL .*\\] Unknown startup option: '--'."
}

function test_dashdash_after_command() {
  bazel info -- &>$TEST_log || fail "info -- failed"
}

function test_nobatch() {
  local pid1=$(bazel --batch --nobatch info server_pid 2> $TEST_log)
  local pid2=$(bazel --batch --nobatch info server_pid 2> $TEST_log)
  assert_equals "$pid1" "$pid2"
  expect_not_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

# Regression test for #1875189, "bazel client should pass through '--help' like
# a command".
function test_bazel_dash_dash_help_is_passed_through() {
  bazel --help >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
  expect_not_log "Unknown startup option: '--help'."
}

function test_bazel_dash_help() {
  bazel -help >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
}

function test_bazel_dash_h() {
  bazel -h >&$TEST_log
  expect_log "Usage: b\\(azel\\|laze\\) <command> <options> ..."
}

function test_bazel_dash_s_is_not_parsed() {
  bazel -s --help >&$TEST_log && fail "Expected failure"
  expect_log "Unknown startup option: '-s'."
}

function test_batch() {
  local pid1=$(bazel info server_pid 2> $TEST_log)
  local pid2=$(bazel --batch info server_pid 2> $TEST_log)
  assert_not_equals "$pid1" "$pid2"
  expect_log "WARNING.* Running B\\(azel\\|laze\\) server needs to be killed"
}

function test_cmdline_not_written_in_batch_mode() {
  OUTPUT_BASE=$(bazel --batch info output_base 2> $TEST_log)
  rm -f $OUTPUT_BASE/server/cmdline
  OUTPUT_BASE2=$(bazel --batch info output_base 2> $TEST_log)
  assert_equals "$OUTPUT_BASE" "$OUTPUT_BASE2"
  [[ ! -e $OUTPUT_BASE/server/cmdline ]] || fail "Command line file written."
}

function test_bad_command_batch() {
  bazel --batch notacommand &> $TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 "$exitcode"
  expect_log "Command 'notacommand' not found."
}

function test_bad_command_nobatch() {
  bazel --nobatch notacommand &> $TEST_log && "Expected failure"
  exitcode=$?
  assert_equals 2 "$exitcode"
  expect_log "Command 'notacommand' not found."
}

function get_pid_environment() {
  local pid="$1"
  case "$(uname -s)" in
    Linux)
      cat "/proc/${pid}/environ" | tr '\0' '\n'
      ;;
    Darwin)
      if ! ps > /dev/null; then
        echo "Cannot use ps command, probably due to sandboxing." >&2
        return 1
      fi
      ps eww -o command "${pid}" | tr ' ' '\n'
      ;;
    *)
      false
      ;;
  esac
}

function test_proxy_settings() {
  # We expect that proxy settings are propagated from the client to the server
  # process, but are _not_ used for client-server communication.

  bazel shutdown  # We are changing the server process's environment variables.

  local example_no_proxy='foo.example.com'
  # A known-invalid http*_proxy value which, if not ignored, would be expected
  # to cause the client-server gRPC channel to time out or otherwise fail.
  local invalid_proxy='http://localhost:0'
  local server_pid
  server_pid="$(http_proxy="${invalid_proxy}" HTTP_PROXY="${invalid_proxy}" \
    https_proxy="${invalid_proxy}" HTTPS_PROXY="${invalid_proxy}" \
    no_proxy="${example_no_proxy}" NO_PROXY="${example_no_proxy}" \
    bazel info server_pid 2> $TEST_log)" \
    || fail "http*_proxy env variables not ignored by client-server channel."

  # Check that the server uses the *_proxy env variables set by the client.
  if get_pid_environment "${server_pid}" > "${TEST_TMPDIR}/server_env"; then
    local var
    for var in http{,s}_proxy HTTP{,S}_PROXY; do
      assert_contains "^${var}=${invalid_proxy}\$" "${TEST_TMPDIR}/server_env"
    done
    for var in no_proxy NO_PROXY; do
      assert_contains "^${var}=${example_no_proxy}\$" \
        "${TEST_TMPDIR}/server_env"
    done
  else
    echo "Cannot not test server process environment on this platform"
  fi
}

function test_macos_qos_class() {
  for class in utility background; do
    bazel --macos_qos_class="${class}" info >"${TEST_log}" 2>&1 \
      || fail "Unknown QoS class ${class}"
    # On macOS it'd be nice to verify that the server is indeed running at the
    # desired class... but this is very hard to do.  Common utilities do not
    # print the QoS level, and powermetrics (which requires root privileges)
    # only reports it under load -- so an "info" command is insufficient and the
    # real thing would be quite expensive.
  done

  for class in user-interactive user-initiated default ; do
    bazel --macos_qos_class="${class}" >"${TEST_log}" 2>&1 \
      && fail "Expected failure with invalid QoS class name"
    expect_log "Invalid argument.*qos_class.*${class}"
  done


}

run_suite "Tests of the bazel client."