# Copyright 2015 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Testing for archive."""

import os
import os.path
import tarfile
import unittest

from tools.build_defs.pkg import archive


class TarFileWriterTest(unittest.TestCase):
  """Testing for TarFileWriter class."""

  def assertTarFileContent(self, tar, content):
    """Assert that tarfile contains exactly the entry described by `content`.

    Args:
        tar: the path to the TAR file to test.
        content: an array describing the expected content of the TAR file.
            Each entry in that list should be a dictionary where each field
            is a field to test in the corresponding TarInfo. For
            testing the presence of a file "x", then the entry could simply
            be `{"name": "x"}`, the missing field will be ignored. To match
            the content of a file entry, use the key "data".
    """
    with tarfile.open(tar, "r:") as f:
      i = 0
      for current in f:
        error_msg = "Extraneous file at end of archive %s: %s" % (
            tar,
            current.name
            )
        self.assertTrue(i < len(content), error_msg)
        for k, v in content[i].items():
          if k == "data":
            value = f.extractfile(current).read()
          else:
            value = getattr(current, k)
          error_msg = " ".join([
              "Value `%s` for key `%s` of file" % (value, k),
              "%s in archive %s does" % (current.name, tar),
              "not match expected value `%s`" % v
              ])
          self.assertEqual(value, v, error_msg)
        i += 1
      if i < len(content):
        self.fail("Missing file %s in archive %s" % (content[i], tar))

  def setUp(self):
    self.tempfile = os.path.join(os.environ["TEST_TMPDIR"], "test.tar")

  def tearDown(self):
    if os.path.exists(self.tempfile):
      os.remove(self.tempfile)

  def testEmptyTarFile(self):
    with archive.TarFileWriter(self.tempfile):
      pass
    self.assertTarFileContent(self.tempfile, [])

  def testDottedFiles(self):
    with archive.TarFileWriter(self.tempfile) as f:
      f.add_file("a")
      f.add_file("/b")
      f.add_file("./c")
      f.add_file("./.d")
      f.add_file("..e")
      f.add_file(".f")
    content = [
        {"name": "."}, {"name": "./a"}, {"name": "/b"}, {"name": "./c"},
        {"name": "./.d"}, {"name": "./..e"}, {"name": "./.f"}
    ]
    self.assertTarFileContent(self.tempfile, content)

  def testAddDir(self):
    # For some strange reason, ending slash is stripped by the test
    content = [
        {"name": ".", "mode": 0o755},
        {"name": "./a", "mode": 0o755},
        {"name": "./a/b", "data": b"ab", "mode": 0o644},
        {"name": "./a/c", "mode": 0o755},
        {"name": "./a/c/d", "data": b"acd", "mode": 0o644},
        ]
    tempdir = os.path.join(os.environ["TEST_TMPDIR"], "test_dir")
    # Iterate over the `content` array to create the directory
    # structure it describes.
    for c in content:
      if "data" in c:
        p = os.path.join(tempdir, c["name"][2:])
        os.makedirs(os.path.dirname(p))
        with open(p, "wb") as f:
          f.write(c["data"])
    with archive.TarFileWriter(self.tempfile) as f:
      f.add_dir("./", tempdir, mode=0o644)
    self.assertTarFileContent(self.tempfile, content)

  def testAddingDirectoriesForFile(self):
    with archive.TarFileWriter(self.tempfile) as f:
      f.add_file("d/f")
    content = [
        {"name": ".",
         "mode": 0o755},
        {"name": "./d",
         "mode": 0o755},
        {"name": "./d/f"},
    ]
    self.assertTarFileContent(self.tempfile, content)

  def testAddingDirectoriesForFileSeparately(self):
    d_dir = os.path.join(os.environ["TEST_TMPDIR"], "d_dir")
    os.makedirs(d_dir)
    with open(os.path.join(d_dir, "dir_file"), "w"):
      pass
    a_dir = os.path.join(os.environ["TEST_TMPDIR"], "a_dir")
    os.makedirs(a_dir)
    with open(os.path.join(a_dir, "dir_file"), "w"):
      pass

    with archive.TarFileWriter(self.tempfile) as f:
      f.add_dir("d", d_dir)
      f.add_file("d/f")

      f.add_dir("a", a_dir)
      f.add_file("a/b/f")
    content = [
        {"name": ".",
         "mode": 0o755},
        {"name": "./d",
         "mode": 0o755},
        {"name": "./d/dir_file"},
        {"name": "./d/f"},
        {"name": "./a",
         "mode": 0o755},
        {"name": "./a/dir_file"},
        {"name": "./a/b",
         "mode": 0o755},
        {"name": "./a/b/f"},
    ]
    self.assertTarFileContent(self.tempfile, content)

  def testAddingDirectoriesForFileManually(self):
    with archive.TarFileWriter(self.tempfile) as f:
      f.add_file("d", tarfile.DIRTYPE)
      f.add_file("d/f")

      f.add_file("a", tarfile.DIRTYPE)
      f.add_file("a/b", tarfile.DIRTYPE)
      f.add_file("a/b", tarfile.DIRTYPE)
      f.add_file("a/b/", tarfile.DIRTYPE)
      f.add_file("a/b/c/f")

      f.add_file("x/y/f")
      f.add_file("x", tarfile.DIRTYPE)
    content = [
        {"name": ".",
         "mode": 0o755},
        {"name": "./d",
         "mode": 0o755},
        {"name": "./d/f"},
        {"name": "./a",
         "mode": 0o755},
        {"name": "./a/b",
         "mode": 0o755},
        {"name": "./a/b/c",
         "mode": 0o755},
        {"name": "./a/b/c/f"},
        {"name": "./x",
         "mode": 0o755},
        {"name": "./x/y",
         "mode": 0o755},
        {"name": "./x/y/f"},
    ]
    self.assertTarFileContent(self.tempfile, content)

  def testChangingRootDirectory(self):
    with archive.TarFileWriter(self.tempfile, root_directory="root") as f:
      f.add_file("d", tarfile.DIRTYPE)
      f.add_file("d/f")

      f.add_file("a", tarfile.DIRTYPE)
      f.add_file("a/b", tarfile.DIRTYPE)
      f.add_file("a/b", tarfile.DIRTYPE)
      f.add_file("a/b/", tarfile.DIRTYPE)
      f.add_file("a/b/c/f")

      f.add_file("x/y/f")
      f.add_file("x", tarfile.DIRTYPE)
    content = [
        {"name": "root",
         "mode": 0o755},
        {"name": "root/d",
         "mode": 0o755},
        {"name": "root/d/f"},
        {"name": "root/a",
         "mode": 0o755},
        {"name": "root/a/b",
         "mode": 0o755},
        {"name": "root/a/b/c",
         "mode": 0o755},
        {"name": "root/a/b/c/f"},
        {"name": "root/x",
         "mode": 0o755},
        {"name": "root/x/y",
         "mode": 0o755},
        {"name": "root/x/y/f"},
    ]
    self.assertTarFileContent(self.tempfile, content)

if __name__ == "__main__":
  unittest.main()