#!/usr/bin/env bash

# Copyright 2015 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# shift stderr to stdout.
exec 2>&1

# Executing the test log will page it.
echo 'exec ${PAGER:-/usr/bin/less} "$0" || exit 1'
echo "Executing tests from ${TEST_TARGET}"

function is_absolute {
  [[ "$1" = /* ]] || [[ "$1" =~ ^[a-zA-Z]:[/\\].* ]]
}

# The original execution root. Usually this script changes directory into the
# runfiles directory, so using $PWD is not a reliable way to find the execution
# root.
EXEC_ROOT="$PWD"

# Declare that the executable is running in a `bazel test` environment
# This allows test frameworks to enable output to the unprefixed environment variable
# For example, if `BAZEL_TEST` and `XML_OUTPUT_FILE` are defined, write JUnit output
export BAZEL_TEST=1

# Bazel sets some environment vars to relative paths to improve caching and
# support remote execution, where the absolute path may not be known to Bazel.
# Convert them to absolute paths here before running the actual test.
is_absolute "$TEST_PREMATURE_EXIT_FILE" ||
  TEST_PREMATURE_EXIT_FILE="$PWD/$TEST_PREMATURE_EXIT_FILE"
is_absolute "$TEST_WARNINGS_OUTPUT_FILE" ||
  TEST_WARNINGS_OUTPUT_FILE="$PWD/$TEST_WARNINGS_OUTPUT_FILE"
is_absolute "$TEST_LOGSPLITTER_OUTPUT_FILE" ||
  TEST_LOGSPLITTER_OUTPUT_FILE="$PWD/$TEST_LOGSPLITTER_OUTPUT_FILE"
is_absolute "$TEST_INFRASTRUCTURE_FAILURE_FILE" ||
  TEST_INFRASTRUCTURE_FAILURE_FILE="$PWD/$TEST_INFRASTRUCTURE_FAILURE_FILE"
is_absolute "$TEST_UNUSED_RUNFILES_LOG_FILE" ||
  TEST_UNUSED_RUNFILES_LOG_FILE="$PWD/$TEST_UNUSED_RUNFILES_LOG_FILE"
is_absolute "$TEST_UNDECLARED_OUTPUTS_DIR" ||
  TEST_UNDECLARED_OUTPUTS_DIR="$PWD/$TEST_UNDECLARED_OUTPUTS_DIR"
is_absolute "$TEST_UNDECLARED_OUTPUTS_MANIFEST" ||
  TEST_UNDECLARED_OUTPUTS_MANIFEST="$PWD/$TEST_UNDECLARED_OUTPUTS_MANIFEST"
if [[ -n "$TEST_UNDECLARED_OUTPUTS_ZIP" ]]; then
  is_absolute "$TEST_UNDECLARED_OUTPUTS_ZIP" ||
    TEST_UNDECLARED_OUTPUTS_ZIP="$PWD/$TEST_UNDECLARED_OUTPUTS_ZIP"
fi
is_absolute "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS" ||
  TEST_UNDECLARED_OUTPUTS_ANNOTATIONS="$PWD/$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS"
is_absolute "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR" ||
  TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR="$PWD/$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR"

is_absolute "$TEST_SRCDIR" || TEST_SRCDIR="$PWD/$TEST_SRCDIR"
is_absolute "$TEST_TMPDIR" || TEST_TMPDIR="$PWD/$TEST_TMPDIR"
is_absolute "$HOME" || HOME="$TEST_TMPDIR"
is_absolute "$XML_OUTPUT_FILE" || XML_OUTPUT_FILE="$PWD/$XML_OUTPUT_FILE"

# Set USER to the current user, unless passed by Bazel via --test_env.
if [[ -z "$USER" ]]; then
  export USER=$(whoami)
fi

# The test shard status file is only set for sharded tests.
if [[ -n "$TEST_SHARD_STATUS_FILE" ]]; then
  is_absolute "$TEST_SHARD_STATUS_FILE" || TEST_SHARD_STATUS_FILE="$PWD/$TEST_SHARD_STATUS_FILE"
  mkdir -p "$(dirname "$TEST_SHARD_STATUS_FILE")"
fi

is_absolute "$RUNFILES_DIR" || RUNFILES_DIR="$PWD/$RUNFILES_DIR"

# TODO(ulfjack): Standardize on RUNFILES_DIR and remove the {JAVA,PYTHON}_RUNFILES vars.
is_absolute "$JAVA_RUNFILES" || JAVA_RUNFILES="$PWD/$JAVA_RUNFILES"
is_absolute "$PYTHON_RUNFILES" || PYTHON_RUNFILES="$PWD/$PYTHON_RUNFILES"

# Create directories for undeclared outputs and their annotations
mkdir -p "$(dirname "$XML_OUTPUT_FILE")" \
    "$TEST_UNDECLARED_OUTPUTS_DIR" \
    "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR"

# Create the test temp directory, which may not exist on the remote host when
# doing a remote build.
mkdir -p "$TEST_TMPDIR"

# Unexport environment variables related to undeclared test outputs that are
# only supposed to be used in this script.
export -n TEST_UNDECLARED_OUTPUTS_MANIFEST
export -n TEST_UNDECLARED_OUTPUTS_ZIP
export -n TEST_UNDECLARED_OUTPUTS_ANNOTATIONS

# Tell googletest about Bazel sharding.
if [[ -n "${TEST_TOTAL_SHARDS+x}" ]] && ((TEST_TOTAL_SHARDS != 0)); then
  export GTEST_SHARD_INDEX="${TEST_SHARD_INDEX}"
  export GTEST_TOTAL_SHARDS="${TEST_TOTAL_SHARDS}"
  export GTEST_SHARD_STATUS_FILE="${TEST_SHARD_STATUS_FILE}"
fi
export GTEST_TMP_DIR="${TEST_TMPDIR}"

# TODO(ulfjack): Update Gunit to accept XML_OUTPUT_FILE and drop this env
# variable.
GUNIT_OUTPUT="xml:${XML_OUTPUT_FILE}"

RUNFILES_MANIFEST_FILE="${TEST_SRCDIR}/MANIFEST"

function rlocation() {
  if is_absolute "$1" ; then
    # If the file path is already fully specified, simply return it.
    echo "$1"
  elif [[ -e "$TEST_SRCDIR/$1" ]]; then
    # If the file exists in the $TEST_SRCDIR then just use it.
    echo "$TEST_SRCDIR/$1"
  elif [[ -e "$RUNFILES_MANIFEST_FILE" ]]; then
    # If a runfiles manifest file exists then use it.
    echo "$(grep "^$1 " "$RUNFILES_MANIFEST_FILE" | sed 's/[^ ]* //')"
  fi
}

# If RUNFILES_MANIFEST_ONLY is set to 1 and the manifest file does exist,
# then test programs should use manifest file to find runfiles.
if [[ "${RUNFILES_MANIFEST_ONLY:-}" == "1" && -e "${RUNFILES_MANIFEST_FILE:-}" ]]; then
  export RUNFILES_MANIFEST_FILE
  export RUNFILES_MANIFEST_ONLY
fi

DIR="$TEST_SRCDIR"
if [ ! -z "$TEST_WORKSPACE" ]; then
  DIR="$DIR"/"$TEST_WORKSPACE"
fi
[[ -n "$RUNTEST_PRESERVE_CWD" ]] && DIR="$PWD"


# normal commands are run in the exec-root where they have access to
# the entire source tree. By chdir'ing to the runfiles root, tests only
# have direct access to their declared dependencies.
if [ -z "$COVERAGE_DIR" ]; then
  cd "$DIR" || { echo "Could not chdir $DIR"; exit 1; }
fi

# This header marks where --test_output=streamed will start being printed.
echo "-----------------------------------------------------------------------------"

# The path of this command-line is usually relative to the exec-root,
# but when using --run_under it can be a "/bin/bash -c" command-line.

# If the test is at the top of the tree, we have to add '.' to $PATH,
PATH=".:$PATH"

if [ -z "$COVERAGE_DIR" ]; then
  EXE="${1#./}"
  shift
else
  EXE="${2#./}"
fi

if is_absolute "$EXE"; then
  TEST_PATH="$EXE"
else
  TEST_PATH="$(rlocation $TEST_WORKSPACE/$EXE)"
fi

# Redefine rlocation to notify users of its removal - it used to be exported.
# TODO: Remove this before Bazel 9.
function rlocation() {
  caller 0 | {
    read LINE SUB FILE
    echo >&2 "ERROR: rlocation is no longer implicitly provided by Bazel's test setup, but called from $SUB in line $LINE of $FILE. Please use https://github.com/bazelbuild/rules_shell/blob/main/shell/runfiles/runfiles.bash instead."
    exit 1
  }
}
export -f rlocation

# TODO(jsharpe): Use --test_env=TEST_SHORT_EXEC_PATH=true to activate this code
# path to workaround a bug with long executable paths when executing remote
# tests on Windows.
if [ ! -z "$TEST_SHORT_EXEC_PATH" ]; then
  QUALIFIER=0
  BASE="${EXEC_ROOT}/t${QUALIFIER}"
  while [[ -e "${BASE}" || -e "${BASE}.exe" || -e "${BASE}.zip" ]]; do
    ((QUALIFIER++))
    BASE="${EXEC_ROOT}/t${QUALIFIER}"
  done

  # Note for the commands below: "ln -s" is equivalent to "cp" on Windows.

  # Needs to be in the same directory for sh_test. Ignore the error when it
  # doesn't exist.
  ln -s "${TEST_PATH%.*}" "${BASE}" 2>/dev/null
  # Needs to be in the same directory for py_test. Ignore the error when it
  # doesn't exist.
  ln -s "${TEST_PATH%.*}.zip" "${BASE}.zip" 2>/dev/null
  # Needed for all tests.
  ln -s "${TEST_PATH}" "${BASE}.exe"
  TEST_PATH="${BASE}.exe"
fi

# Helper to kill a process and its entire group.
function kill_group {
  local signal="${1-}"
  local pid="${2-}"
  kill -$signal -$pid &> /dev/null
}

childPid=""
function signal_children {
  local signal="${1-}"
  if [ "${signal}" = "SIGTERM" ]; then
    echo "-- Test timed out at $(date +"%F %T %Z") --"
  fi
  if [ ! -z "$childPid" ]; then
    # For consistency with historical bazel behaviour, send signal to all child
    # processes, not just the first one. We use the process group for this
    # purpose.
    kill_group $signal $childPid
  fi
}

exitCode=0
signals="$(trap -l | sed -E 's/[0-9]+\)//g')"
for signal in $signals; do
  # SIGCHLD is expected when a subprocess dies
  [ "${signal}" = "SIGCHLD" ] && continue
  trap "signal_children ${signal}" ${signal}
done
start=$(date +%s)

# We have a challenge here: we want to forward signals to our child processes,
# but we also want them to send themselves signals like SIGINT. Catching signals
# ourselves requires use of background processes, trap, and wait. But normally
# background processes are themselves unable to receive signals like SIGINT,
# since those signals are intended for interactive processes - the only way for
# them to get SIGINT in bash is for us to run them in the foreground.
# To achieve this, we have to use `set -m` to enable Job Control in bash. This
# has the effect of putting the child processes and any children of their own
# into their own process groups, which are then able to receive SIGINT, etc,
# without our shell interfering. Of course, this has the new complication that
# anyone trying to SIGKILL *us* by group (as we know bazel's legacy process
# wrapper does) will only kill this process and not the children below it. Any
# reasonable sandboxing uses at least a process namespace, but we don't have the
# luxury of assuming one, so our children could be left behind in that
# eventuality. So, what we do is spawn a *second* background process that
# watches for us to be killed, and then chain-kills the test's process group.
# Aren't processes fun?
# Note: When running under bazel run, as determined by the availability of an
# environment variable specific to it, don't use job control as it interferes
# with interactive debugging. Also skip cleanup and post-processing steps such
# as undeclared outputs zipping to avoid unexpected latency when the user
# finishes debugging.
if [ -n "$BUILD_EXECROOT" ]; then
  exec "${TEST_PATH}" "$@" 2>&1
fi
set -m
if [ -z "$COVERAGE_DIR" ]; then
  ("${TEST_PATH}" "$@" 2>&1) <&0 &
else
  ("$1" "$TEST_PATH" "${@:3}" 2>&1) <&0 &
fi
childPid=$!

# Cleanup helper
# It would be nice to use `kill -0 $PPID` here, but when whatever called this
# is running as a different user (as happens in remote execution) that will
# return an error, causing us to prematurely reap a running test.
( if ! (ps -p $$ &> /dev/null || [ "`pgrep -a -g $$ 2> /dev/null`" != "" ] ); then
   # `ps` is known to be unrunnable in the darwin sandbox-exec environment due
   # to being a set-uid root program. pgrep exists in most environments, but not
   # universally. In the event that we find ourselves running in an environment
   # where *neither* exists, we have no reliable way to check if our parent is
   # still alive - so simply disable this cleanup routine entirely.
   exit 0
 fi
 while ps -p $$ &> /dev/null || [ "`pgrep -a -g $$ 2> /dev/null`" != "" ]; do
    sleep 10
 done
 # Parent process not found - we've been abandoned! Clean up test processes.
 kill_group SIGKILL $childPid
) &>/dev/null &
cleanupPid=$!

set +m

# Wait until $childPid fully exits.
# We need to wait in a loop because wait is interrupted by any incoming trapped
# signal (https://www.gnu.org/software/bash/manual/bash.html#Signals).
while kill -0 $childPid 2>/dev/null; do
  wait $childPid
done
# Wait one more time to retrieve the exit code.
wait $childPid
exitCode=$?

# By this point, we have everything we're willing to wait for. Tidy up our own
# processes and move on.
kill_group SIGKILL $childPid
kill_group SIGKILL $cleanupPid &> /dev/null
wait $cleanupPid

for signal in $signals; do
  trap - ${signal}
done

# Add all of the files from the undeclared outputs directory to the manifest.
if [[ -n "$TEST_UNDECLARED_OUTPUTS_DIR" && -n "$TEST_UNDECLARED_OUTPUTS_MANIFEST" ]]; then
  undeclared_outputs="$(find -L "$TEST_UNDECLARED_OUTPUTS_DIR" -type f | sort)"
  # Only write the manifest if there are any undeclared outputs.
  if [[ ! -z "$undeclared_outputs" ]]; then
    # For each file, write a tab-separated line with name (relative to
    # TEST_UNDECLARED_OUTPUTS_DIR), size, and mime type to the manifest. e.g.
    # foo.txt	9	text/plain
    while read -r undeclared_output; do
      rel_path="${undeclared_output#$TEST_UNDECLARED_OUTPUTS_DIR/}"
      # stat has different flags for different systems. -c is supported by GNU,
      # and -f by BSD (and thus OSX). Try both.
      file_size="$(stat -f%z "$undeclared_output" 2>/dev/null || stat -c%s "$undeclared_output" 2>/dev/null || echo "Could not stat $undeclared_output")"
      file_type="$(file -L -b --mime-type "$undeclared_output")"

      printf "$rel_path\t$file_size\t$file_type\n"
    done <<< "$undeclared_outputs" \
      > "$TEST_UNDECLARED_OUTPUTS_MANIFEST"
    if [[ ! -s "$TEST_UNDECLARED_OUTPUTS_MANIFEST" ]]; then
      rm "$TEST_UNDECLARED_OUTPUTS_MANIFEST"
    fi
  fi
fi

# Add all of the custom manifest entries to the annotation file.
if [[ -n "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS" && \
      -n "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR" && \
      -d "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR" ]]; then
  (
   shopt -s failglob
   cat "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR"/*.part > "$TEST_UNDECLARED_OUTPUTS_ANNOTATIONS"
  ) 2> /dev/null
  (
   # length-delimited proto files
   shopt -s failglob
   cat $TEST_UNDECLARED_OUTPUTS_ANNOTATIONS_DIR/*.pb > "${TEST_UNDECLARED_OUTPUTS_ANNOTATIONS}.pb"
  ) 2> /dev/null
fi

# Zip up undeclared outputs.
if [[ -n "$TEST_UNDECLARED_OUTPUTS_ZIP" ]] && cd "$TEST_UNDECLARED_OUTPUTS_DIR"; then
  shopt -s dotglob nullglob
  # Capture the contents of TEST_UNDECLARED_OUTPUTS_DIR prior to creating the output.zip
  UNDECLARED_OUTPUTS=(*)
  if [[ "${#UNDECLARED_OUTPUTS[@]}" != 0 ]]; then
    if ! zip_output="$(zip -qr "$TEST_UNDECLARED_OUTPUTS_ZIP" -- "${UNDECLARED_OUTPUTS[@]}")" ; then
      echo >&2 "Could not create \"$TEST_UNDECLARED_OUTPUTS_ZIP\": $zip_output"
      exit 1
    fi
    # Use 'rm' instead of 'zip -m' so that we don't follow symlinks when deleting the
    # contents.
    rm -r "${UNDECLARED_OUTPUTS[@]}"
  fi
fi

# Raise the original signal if the test terminated abnormally.
if [ $exitCode -gt 128 ]; then
  kill -$(($exitCode - 128)) $$ &> /dev/null
fi
exit $exitCode