---
layout: documentation
title: User's Guide
---
<h1>A User's Guide to Bazel</h1>


<p>
  To run Bazel, go to

  your base <a href="build-ref.html#workspace">workspace</a> directory
  or any of its subdirectories and type <code>bazel</code>.
</p>

<pre>
  % bazel help
                             [Bazel release bazel-&lt;<i>version</i>&gt;]
  Usage: bazel &lt;command&gt; &lt;options&gt; ...

  Available commands:
    <a href='user-manual.html#analyze-profile'>analyze-profile</a>     Analyzes build profile data.
    <a href='user-manual.html#aquery'>aquery</a>              Executes a query on the <a href='#analysis-phase'>post-analysis</a> action graph.
    <a href='#build'>build</a>               Builds the specified targets.
    <a href='user-manual.html#canonicalize'>canonicalize-flags</a>  Canonicalize Bazel flags.
    <a href='user-manual.html#clean'>clean</a>               Removes output files and optionally stops the server.

    <a href='user-manual.html#query'>cquery</a>              Executes a <a href='#analysis-phase'>post-analysis</a> dependency graph query.

    <a href='user-manual.html#dump'>dump</a>                Dumps the internal state of the Bazel server process.

    <a href='user-manual.html#help'>help</a>                Prints help for commands, or the index.
    <a href='user-manual.html#info'>info</a>                Displays runtime info about the bazel server.

    <a href='#fetch'>fetch</a>               Fetches all external dependencies of a target.
    <a href='user-manual.html#mobile-install'>mobile-install</a>      Installs apps on mobile devices.

    <a href='user-manual.html#query'>query</a>               Executes a dependency graph query.

    <a href='user-manual.html#run'>run</a>                 Runs the specified target.
    <a href='user-manual.html#shutdown'>shutdown</a>            Stops the Bazel server.
    <a href='user-manual.html#test'>test</a>                Builds and runs the specified test targets.
    <a href='user-manual.html#version'>version</a>             Prints version information for Bazel.

  Getting more help:
    bazel help &lt;command&gt;
                     Prints help and options for &lt;command&gt;.
    bazel help <a href='user-manual.html#startup_options'>startup_options</a>
                     Options for the JVM hosting Bazel.
    bazel help <a href='#target-patterns'>target-syntax</a>
                     Explains the syntax for specifying targets.
    bazel help info-keys
                     Displays a list of keys used by the info command.

</pre>
<p>
  The <code>bazel</code> tool performs many functions, called
  commands.  The most commonly used ones are <code>bazel build</code>
  and <code>bazel test</code>.  You can browse the online help
  messages using <code>bazel help</code>.
</p>


<h2 id='build'>Building programs with Bazel</h2>
<h3>The <code>build</code> command</h3>

<p>
  Type <code>bazel build</code> followed by the name of the
  <a href="#target-patterns">target</a> you wish to build. Here's a typical
  session:
</p>
<pre>
  % bazel build //foo
  ____Loading package: foo
  ____Loading package: bar
  ____Loading package: baz
  ____Loading complete.  Analyzing...
  ____Building 1 target...
  ____[0 / 3] Executing Genrule //bar:helper_rule
  ____[1 / 3] Executing Genrule //baz:another_helper_rule
  ____[2 / 3] Building foo/foo.bin
  Target //foo:foo up-to-date:
    bazel-bin/foo/foo.bin
    bazel-bin/foo/foo
  ____Elapsed time: 9.905s
</pre>
<p>
  Bazel prints the progress messages as it loads all the
  packages in the transitive closure of dependencies of the requested
  target, then analyzes them for correctness and to create the build actions,
  finally executing the compilers and other tools of the build.
</p>
<p>
  Bazel prints progress messages during
  the <a href='#execution-phase'>execution phase</a> of the build, showing the
  current build step (compiler, linker, etc.) that is being started,
  and the number completed over the total number of build actions. As the
  build starts the number of total actions will often increase as Bazel
  discovers the entire action graph, but the number will usually stabilize
  within a few seconds.
</p>
<p>
  At the end of the build Bazel
  prints which targets were requested, whether or not they were
  successfully built, and if so, where the output files can be found.
  Scripts that run builds can reliably parse this output; see <a
  href='user-manual.html#flag--show_result'><code class='flag'>--show_result</code></a> for more
  details.
</p>
<p>
  Typing the same command again:
</p>
<pre>
  % bazel build //foo
  ____Loading...
  ____Found 1 target...
  ____Building complete.
  Target //foo:foo up-to-date:
    bazel-bin/foo/foo.bin
    bazel-bin/foo/foo
  ____Elapsed time: 0.280s
</pre>
<p>
  we see a "null" build: in this case, there are no packages to
  re-load, since nothing has changed, and no build steps to execute.
  (If something had changed in "foo" or some of its dependencies, resulting in the
  reexecution of some build actions, we would call it an "incremental" build, not a
  "null" build.)
</p>

<p>
  Before you can start a build, you will need a Bazel workspace. This is
  simply a directory tree that contains all the source files needed to build
  your application.
  Bazel allows you to perform a build from a completely read-only volume.
</p>
<h3 id='target-patterns'>Specifying targets to build</h3>
<p>
  Bazel allows a number of ways to specify the targets to be built.
  Collectively, these are known as <i>target patterns</i>. This syntax is
  used in commands like <code>build</code>, <code>test</code>,
  or <code>query</code>.
</p>

<p>
  Whereas <a href="build-ref.html#labels">labels</a> are used
  to specify individual targets, e.g. for declaring dependencies in
  BUILD files, Bazel's target patterns are a syntax for specifying
  multiple targets: they are a generalization of the label syntax
  for <i>sets</i> of targets, using wildcards.  In the simplest case,
  any valid label is also a valid target pattern, identifying a set of
  exactly one target.
</p>

<p>
All target patterns starting with <code>//</code> are resolved relative to the current
workspace.
<table>
<tr>
  <td><code>//foo/bar:wiz</code></td>
  <td>Just the single target <code>//foo/bar:wiz</code>.</td>
</tr>
<tr>
  <td><code>//foo/bar</code></td>
  <td>Equivalent to <code>//foo/bar:bar</code>.</td>
</tr>
<tr>
  <td><code>//foo/bar:all</code></td>
  <td>All rules in the package <code>foo/bar</code>.</td>
</tr>
<tr>
  <td><code>//foo/...</code></td>
  <td>All rules in all packages beneath the directory <code>foo</code>.</td>
</tr>
<tr>
  <td><code>//foo/...:all</code></td>
  <td>All rules in all packages beneath the directory <code>foo</code>.</td>
</tr>
<tr>
  <td><code>//foo/...:*</code></td>
  <td>All targets (rules and files) in all packages beneath the directory <code>foo</code>.</td>
</tr>
<tr>
  <td><code>//foo/...:all-targets</code></td>
  <td>All targets (rules and files) in all packages beneath the directory <code>foo</code>.</td>
</tr>
</table>
</p>

<p>
Target patterns which do not begin with <code>//</code> are resolved relative to the
current <em>working directory</em>. These examples assume a working directory of
<code>foo</code>:
<table>
<tr>
  <td><code>:foo</code></td>
  <td>Equivalent to  <code>//foo:foo</code>.</td>
</tr>
<tr>
  <td><code>bar:wiz</code></td>
  <td>Equivalent to <code>//foo/bar:wiz</code>.</td>
</tr>
<tr>
  <td><code>bar/wiz</code></td>
  <td>Equivalent to:
                      <code>//foo/bar/wiz:wiz</code> if <code>foo/bar/wiz</code> is a package,
                      <code>//foo/bar:wiz</code> if <code>foo/bar</code> is a package,
                      <code>//foo:bar/wiz</code> otherwise.
  </td>
</tr>
<tr>
  <td><code>bar:all</code></td>
  <td>Equivalent to  <code>//foo/bar:all</code>.</td>
</tr>
<tr>
  <td><code>:all</code></td>
  <td>Equivalent to  <code>//foo:all</code>.</td>
</tr>
<tr>
  <td><code>...:all</code></td>
  <td>Equivalent to  <code>//foo/...:all</code>.</td>
</tr>
<tr>
  <td><code>...</code></td>
  <td>Equivalent to  <code>//foo/...:all</code>.</td>
</tr>
<tr>
  <td><code>bar/...:all</code></td>
  <td>Equivalent to  <code>//foo/bar/...:all</code>.</td>
</tr>
</table>
</p>

<p>
By default, directory symlinks are followed for recursive target patterns,
except those that point to under the output base, such as the convenience
symlinks that are created in the root directory of the workspace.
</p>

<p>
In addition, Bazel does not follow symlinks when evaluating recursive target
patterns in any directory that contains a file named as follows:
<pre>
DONT_FOLLOW_SYMLINKS_WHEN_TRAVERSING_THIS_DIRECTORY_VIA_A_RECURSIVE_TARGET_PATTERN
</pre>
</p>

<p>
  <code>foo/...</code> is a wildcard over <em>packages</em>,
  indicating all packages recursively beneath
  directory <code>foo</code> (for all roots of the package
  path).  <code>:all</code> is a wildcard
  over <em>targets</em>, matching all rules within a package.  These two may be
  combined, as in <code>foo/...:all</code>, and when both wildcards
  are used, this may be abbreviated to <code>foo/...</code>.
</p>
<p>
  In addition, <code>:*</code> (or <code>:all-targets</code>) is a
  wildcard that matches <em>every target</em> in the matched packages,
  including files that aren't normally built by any rule, such
  as <code>_deploy.jar</code> files associated
  with <code>java_binary</code> rules.
</p>
<p>
  This implies that <code>:*</code> denotes a <em>superset</em>
  of <code>:all</code>; while potentially confusing, this syntax does
  allow the familiar <code>:all</code> wildcard to be used for
  typical builds, where building targets like the <code>_deploy.jar</code>
  is not desired.
</p>
<p>
  In addition, Bazel allows a slash to be used instead of the colon
  required by the label syntax; this is often convenient when using
  Bash filename expansion.  For example, <code>foo/bar/wiz</code> is
  equivalent to <code>//foo/bar:wiz</code> (if there is a
  package <code>foo/bar</code>) or to <code>//foo:bar/wiz</code> (if
  there is a package <code>foo</code>).
</p>
<p>
  Many Bazel commands accept a list of target patterns as arguments,
  and they all honor the prefix negation operator <code>-</code>.
  This can be used to subtract a set of targets from the set specified
  by the preceding arguments. Note that this means order matters.
  For example,
</p>
<pre>
  bazel build foo/... bar/...
</pre>
<p>
  means "build all
  targets beneath <code>foo</code> <i>and</i> all targets
  beneath <code>bar</code>", whereas
</p>
<pre>
  bazel build -- foo/... -foo/bar/...
</pre>
<p>
  means "build all targets beneath <code>foo</code> <i>except</i>
  those beneath <code>foo/bar</code>".

  (The <code>--</code> argument is required to prevent the subsequent
  arguments starting with <code>-</code> from being interpreted as
  additional options.)
</p>
<p>
  It's important to point out though that subtracting targets this way will not
  guarantee that they are not built, since they may be dependencies of targets
  that weren't subtracted. For example, if there were a target
  <code>//foo:all-apis</code> that among others depended on
  <code>//foo/bar:api</code>, then the latter would be built as part of
  building the former.
</p>
<p>
  Targets with <code>tags = ["manual"]</code> will not be included in wildcard target patterns (
  <code>...</code>, <code>:*</code>, <code>:all</code>, etc.).
  You should specify such test targets with explicit target patterns on the command
  line if you want Bazel to build/test them.
</p>

<h3 id='fetch'>Fetching external dependencies</h3>

<p>
  By default, Bazel will download and symlink external dependencies during the
  build. However, this can be undesirable, either because you'd like to know
  when new external dependendencies are added or because you'd like to
  "prefetch" dependencies (say, before a flight where you'll be offline). If you
  would like to prevent new dependencies from being added during builds, you
  can specify the <code>--fetch=false</code> flag. Note that this flag only
  applies to repository rules that do not point to a directory in the local
  file system. Changes, for example, to <code>local_repository</code>,
  <code>new_local_repository</code> and Android SDK and NDK repository rules
  will always take effect regardless of the value <code>--fetch</code> .
</p>

<p>
  If you disallow fetching during builds and Bazel finds new external
  dependencies, your build will fail.
</p>

<p>
  You can manually fetch dependencies by running <code>bazel fetch</code>. If
  you disallow during-build fetching, you'll need to run <code>bazel
  fetch</code>:
  <ol>
    <li>Before you build for the first time.
    <li>After you add a new external dependency.
  </ol>
  Once it has been run, you should not need to run it again until the WORKSPACE
  file changes.
</p>

<p>
  <code>fetch</code> takes a list of targets to fetch dependencies for. For
  example, this would fetch dependencies needed to build <code>//foo:bar</code>
  and <code>//bar:baz</code>:
<pre>
$ bazel fetch //foo:bar //bar:baz
</pre>
</p>

<p>
  To fetch all external dependencies for a workspace, run:
<pre>
$ bazel fetch //...
</pre>
</p>

<p>
  You do not need to run bazel fetch at all if you have all of the tools you are
  using (from library jars to the JDK itself) under your workspace root.
  However, if you're using anything outside of the workspace directory then Bazel
  will automatically run <code>bazel fetch</code> before running
  <code>bazel build</code>.
</p>

<h4 id='repository-cache'>The repository cache</h4>

<p>
  Bazel tries to avoid fetching the same file several times, even if the same
  file is needed in different workspaces, or if the definition of an external
  repository changed but it still needs the same file to download. To do so,
  bazel caches all files downloaded in the repository cache which, by default,
  is  located at <code>~/.cache/bazel/_bazel_$USER/cache/repos/v1/</code>. The
  location can be changed by the <code>--repository_cache</code> option. The
  cache is shared between all workspaces and installed versions of bazel.
  An entry is taken from the cache if
  Bazel knows for sure that it has a copy of the correct file, that is, if the
  download request has a SHA256 sum of the file specified and a file with that
  hash is in the cache. So specifying a hash for each external file is
  not only a good idea from a security perspective; it also helps avoiding
  unnecessary downloads.
</p>

<p>
  Upon each cache hit, the modification time of the file in the cache is
  updated. In this way, the last use of a file in the cache directory can easily
  be determined, for example to manually clean up the cache. The cache is never
  cleaned up automatically, as it might contain a copy of a file that is no
  longer available upstream.
</p>

<h4 id='distdir'>Distribution files directories</h4>

<p>
  Besides the repository cache, Bazel has a second mechanism to avoid
  unnecessary downloads. Using the <code>--distdir</code> option, you can
  specify additional read-only directories to look for files instead of fetching
  them. A file is taken from such a directory if the file name is equal to
  the base name of the URL and additionally the hash of the file is equal to the
  one specified in the download request (again, no file is taken from a distdir,
  if no hash is specified). While the condition on the file name is not
  necessary for correctness, it reduces the number of candidate files to one per
  specified directory. In this way, specifying distribution files directories
  remains efficient, even if the number of files in such a directory grows
  large.
</p>

<h3 id='configurations'>Build configurations and cross-compilation</h3>

<p>
  All the inputs that specify the behavior and result of a given
  build can be divided into two distinct categories.
  The first kind is the intrinsic information stored in the BUILD
  files of your project: the build rule, the values of its attributes,
  and the complete set of its transitive dependencies.
  The second kind is the external or environmental data, supplied by
  the user or by the build tool: the choice of target architecture,
  compilation and linking options, and other toolchain configuration
  options.  We refer to a complete set of environmental data as
  a <b>configuration</b>.
</p>
<p>
  In any given build, there may be more than one configuration.
  Consider a cross-compile, in which you build
  a <code>//foo:bin</code> executable for a 64-bit architecture,
  but your workstation is a 32-bit machine. Clearly, the build
  will require building <code>//foo:bin</code> using a toolchain
  capable of creating 64-bit executables, but the build system must
  also build various tools used during the build itself&mdash;for example
  tools that are built from source, then subsequently used in, say, a
  genrule&mdash;and these must be built to run on your workstation.
  Thus we can identify two configurations: the <b>host
  configuration</b>, which is used for building tools that run during
  the build, and the <b>target configuration</b> (or <i>request
  configuration</i>, but we say "target configuration" more often even
  though that word already has many meanings), which is
  used for building the binary you ultimately requested.
</p>
<p>
  Typically, there are many libraries that are prerequisites of both
  the requested build target (<code>//foo:bin</code>) and one or more of
  the host tools, for example some base libraries. Such libraries must be built
  twice, once for the host configuration, and once for the target
  configuration.<br/>
  Bazel takes care of ensuring that both variants are built, and that
  the derived files are kept separate to avoid interference; usually
  such targets can be built concurrently, since they are independent
  of each other.  If you see progress messages indicating that a given
  target is being built twice, this is most likely the explanation.
</p>
<p>
  Bazel uses one of two ways to select the host configuration, based
  on the <code class='flag'>--distinct_host_configuration</code> option.  This
  boolean option is somewhat subtle, and the setting may improve (or
  worsen) the speed of your builds.
</p>

<h4><code class='flag'>--distinct_host_configuration=false</code></h4>
<p>
  When this option is false, the host and
  request configurations are identical: all tools required during the
  build will be built in exactly the same way as target programs.
  This setting means that no libraries need to be built twice during a
  single build, so it keeps builds short.
  However, it does mean that any change to your request configuration
  also affects your host configuration, causing all the tools to be
  rebuilt, and then anything that depends on the tool output to be
  rebuilt too.  Thus, for example, simply changing a linker option
  between builds might cause all tools to be re-linked, and then all
  actions using them reexecuted, and so on, resulting in a very large rebuild.
  Also, please note: if your host architecture is not capable of
  running your target binaries, your build will not work.
</p>
<p>
  If you frequently make changes to your request configuration, such
  as alternating between <code>-c opt</code> and <code>-c dbg</code>
  builds, or between simple- and cross-compilation, we do not
  recommend this option, as you will typically rebuild the majority of
  your codebase each time you switch.
</p>

<h4><code class='flag'>--distinct_host_configuration=true</code> <i>(default)</i></h4>
<p>
  If this option is true, then instead of using the same configuration
  for the host and request, a completely distinct host configuration
  is used.  The host configuration is derived from the target
  configuration as follows:
</p>
<ul>
  <li>Use the same version of Crosstool
    (<code class='flag'>--crosstool_top</code>) as specified in the request
    configuration, unless <code class='flag'>--host_crosstool_top</code> is
    specified.
  </li>
  <li>
    Use the value of <code class="flag">--host_cpu</code> for
    <code class='flag'>--cpu</code>

    (default: <code>k8</code>).
  </li>
  <li>Use the same values of these options as specified in the request
    configuration:
    <code class='flag'>--compiler</code>,
    <code class='flag'>--use_ijars</code>,
    If <code class='flag'>--host_crosstool_top</code> is used, then the value of
    <code class='flag'>--host_cpu</code> is used to look up a
    <code>default_toolchain</code> in the Crosstool
    (ignoring <code class='flag'>--compiler</code>) for the host configuration.
  </li>
  <li>
    Use the value of <code class="flag">--host_javabase</code> for
    <code class='flag'>--javabase</code>
  </li>
  <li>
    Use the value of <code class="flag">--host_java_toolchain</code> for
    <code class='flag'>--java_toolchain</code>
  </li>
  <li>Use optimized builds for C++ code (<code>-c opt</code>).
  </li>
  <li>Generate no debugging information (<code class='flag'>--copt=-g0</code>).
  </li>
  <li>Strip debug information from executables and shared libraries
    (<code class='flag'>--strip=always</code>).
  </li>
  <li>Place all derived files in a special location, distinct from
    that used by any possible request configuration.
  </li>
  <li>Suppress stamping of binaries with build data
    (see <code class='flag'>--embed_*</code> options).
  </li>
  <li>All other values remain at their defaults.
  </li>
</ul>
<p>
  There are many reasons why it might be preferable to select a
  distinct host configuration from the request configuration.
  Some are too esoteric to mention here, but two of them are worth
  pointing out.
</p>
<p>
  Firstly, by using stripped, optimized binaries, you reduce the time
  spent linking and executing the tools, the disk space occupied by
  the tools, and the network I/O time in distributed builds.
</p>
<p>
  Secondly, by decoupling the host and request configurations in all
  builds, you avoid very expensive rebuilds that would result from
  minor changes to the request configuration (such as changing a linker options
  does), as described earlier.
</p>
<p>
  That said, for certain builds, this option may be a hindrance.  In
  particular, builds in which changes of configuration are infrequent
  (especially certain Java builds), and builds where the amount of code that
  must be built in both host and target configurations is large, may
  not benefit.
</p>

<h3 id='correctness'>Correct incremental rebuilds</h3>

<p>
  One of the primary goals of the Bazel project is to ensure correct
  incremental rebuilds.  Previous build tools, especially those based
  on Make, make several unsound assumptions in their implementation of
  incremental builds.
</p>
<p>
  Firstly, that timestamps of files increase monotonically.  While
  this is the typical case, it is very easy to fall afoul of this
  assumption; syncing to an earlier revision of a file causes that file's
  modification time to decrease; Make-based systems will not rebuild.
</p>
<p>
  More generally, while Make detects changes to files, it does
  not detect changes to commands.  If you alter the options passed to
  the compiler in a given build step, Make will not re-run the
  compiler, and it is necessary to manually discard the invalid
  outputs of the previous build using <code>make clean</code>.
</p>
<p>
  Also, Make is not robust against the unsuccessful termination of one
  of its subprocesses after that subprocess has started writing to
  its output file.  While the current execution of Make will fail, the
  subsequent invocation of Make will blindly assume that the truncated
  output file is valid (because it is newer than its inputs), and it
  will not be rebuilt.  Similarly, if the Make process is killed, a
  similar situation can occur.
</p>
<p>
  Bazel avoids these assumptions, and others.  Bazel maintains a database
  of all work previously done, and will only omit a build step if it
  finds that the set of input files (and their timestamps) to that
  build step, and the compilation command for that build step, exactly
  match one in the database, and, that the set of output files (and
  their timestamps) for the database entry exactly match the
  timestamps of the files on disk.  Any change to the input files or
  output files, or to the command itself, will cause re-execution of
  the build step.
</p>
<p>
  The benefit to users of correct incremental builds is: less time
  wasted due to confusion.  (Also, less time spent waiting for
  rebuilds caused by use of <code>make clean</code>, whether necessary
  or pre-emptive.)
</p>

<h4>Build consistency and incremental builds</h4>
<p>
  Formally, we define the state of a build as <i>consistent</i> when
  all the expected output files exist, and their contents are correct,
  as specified by the steps or rules required to create them.  When
  you edit a source file, the state of the build is said to
  be <i>inconsistent</i>, and remains inconsistent until you next run
  the build tool to successful completion.  We describe this situation
  as <i>unstable inconsistency</i>, because it is only temporary, and
  consistency is restored by running the build tool.
</p>
<p>
  There is another kind of inconsistency that is pernicious: <i>stable
  inconsistency</i>.  If the build reaches a stable inconsistent
  state, then repeated successful invocation of the build tool does
  not restore consistency: the build has gotten "stuck", and the
  outputs remain incorrect.  Stable inconsistent states are the main
  reason why users of Make (and other build tools) type <code>make
  clean</code>.  Discovering that the build tool has failed in this
  manner (and then recovering from it) can be time consuming and very
  frustrating.
</p>
<p>
  Conceptually, the simplest way to achieve a consistent build is to
  throw away all the previous build outputs and start again: make
  every build a clean build.  This approach is obviously too
  time-consuming to be practical (except perhaps for release
  engineers), and therefore to be useful, the build tool must be able
  to perform incremental builds without compromising consistency.
</p>
<p>
  Correct incremental dependency analysis is hard, and as described
  above, many other build tools do a poor job of avoiding stable
  inconsistent states during incremental builds.  In contrast, Bazel
  offers the following guarantee: after a successful invocation of the
  build tool during which you made no edits, the build will be in a
  consistent state.  (If you edit your source files during a build,
  Bazel makes no guarantee about the consistency of the result of the
  current build.  But it does guarantee that the results of
  the <i>next</i> build will restore consistency.)
</p>
<p>
  As with all guarantees, there comes some fine print: there are some
  known ways of getting into a stable inconsistent state with Bazel.
  We won't guarantee to investigate such problems arising from deliberate
  attempts to find bugs in the incremental dependency analysis, but we
  will investigate and do our best to fix all stable inconsistent
  states arising from normal or "reasonable" use of the build tool.
</p>
<p>
  If you ever detect a stable inconsistent state with Bazel, please report a bug.

</p>

<h4 id='sandboxing'>Sandboxed execution</h4>
<p>
  Bazel uses sandboxes to guarantee that actions run hermetically<sup>1</sup> and correctly.
  Bazel runs <i>Spawn</i>s (loosely speaking: actions) in sandboxes that only contain the minimal
  set of files the tool requires to do its job. Currently sandboxing works on Linux 3.12 or newer
  with the <code>CONFIG_USER_NS</code> option enabled, and also on macOS 10.11 or newer.
</p>
<p>
  Bazel will print a warning if your system does not support sandboxing to alert you to the fact
  that builds are not guaranteed to be hermetic and might affect the host system in unknown ways.
  To disable this warning you can pass the <code>--ignore_unsupported_sandboxing</code> flag to
  Bazel.
</p>

<p>
  On some platforms such as <a href="https://cloud.google.com/kubernetes-engine/">Google Kubernetes
  Engine</a> cluster nodes or Debian, user namespaces are deactivated by default due to security
  concerns. This can be checked by looking at the file
  <code>/proc/sys/kernel/unprivileged_userns_clone</code>: if it exists and contains a 0, then
  user namespaces can be activated with <code>sudo sysctl kernel.unprivileged_userns_clone=1</code>.
</p>
<p>
  In some cases, the Bazel sandbox fails to execute rules because of the system setup. The symptom
  is generally a failure that output a message similar to
  <code>namespace-sandbox.c:633: execvp(argv[0], argv): No such file or directory</code>. In that
  case, try to deactivate the sandbox for genrules with <code>--strategy=Genrule=standalone</code>
  and for other rules with <code>--spawn_strategy=standalone</code>. Also please report a bug on our
  issue tracker and mention which Linux distribution you're using so that we can investigate and
  provide a fix in a subsequent release.
</p>

<p>
  <sup>1</sup>: Hermeticity means that the action only uses its declared input files and no other
  files in the filesystem, and it only produces its declared output files.
</p>


<h3 id='phases'>Phases of a build</h3>

<p>
  In Bazel, a build occurs in three distinct phases; as a user,
  understanding the difference between them provides insight into the
  options which control a build (see below).
</p>

<h4 id='loading-phase'>Loading phase</h4>
<p>
  The first is <b>loading</b> during which all the necessary BUILD
  files for the initial targets, and their transitive closure of
  dependencies, are loaded, parsed, evaluated and cached.
</p>
<p>
  For the first build after a Bazel server is started, the loading
  phase typically takes many seconds as many BUILD files are loaded
  from the file system.  In subsequent builds, especially if no BUILD
  files have changed, loading occurs very quickly.
</p>
<p>
  Errors reported during this phase include: package not found, target
  not found, lexical and grammatical errors in a BUILD file,
  and evaluation errors.
</p>

<h4 id='analysis-phase'>Analysis phase</h4>
<p>
  The second phase, <b>analysis</b>, involves the semantic analysis
  and validation of each build rule, the construction of a build
  dependency graph, and the determination of exactly what work is to
  be done in each step of the build.
</p>
<p>
  Like loading, analysis also takes several seconds when computed in
  its entirety.  However, Bazel caches the dependency graph from
  one build to the next and only reanalyzes what it has to, which can
  make incremental builds extremely fast in the case where the
  packages haven't changed since the previous build.
</p>
<p>
  Errors reported at this stage include: inappropriate dependencies,
  invalid inputs to a rule, and all rule-specific error messages.
</p>
<p>
  The loading and analysis phases are fast because
  Bazel avoids unnecessary file I/O at this stage, reading only BUILD
  files in order to determine the work to be done.  This is by design,
  and makes Bazel a good foundation for analysis tools, such as
  Bazel's <a href='#query'>query</a> command, which is implemented
  atop the loading phase.
</p>

<h4 id='execution-phase'>Execution phase</h4>
<p>
  The third and final phase of the build is <b>execution</b>.  This
  phase ensures that the outputs of each step in the build are
  consistent with its inputs, re-running compilation/linking/etc. tools as
  necessary.  This step is where the build spends the majority of
  its time, ranging from a few seconds to over an hour for a large
  build.  Errors reported during this phase include: missing source
  files, errors in a tool executed by some build action, or failure of a tool to
  produce the expected set of outputs.
</p>


<h2 id='client/server'>Client/server implementation</h2>

<p>
  The Bazel system is implemented as a long-lived server process.
  This allows it to perform many optimizations not possible with a
  batch-oriented implementation, such as caching of BUILD files,
  dependency graphs, and other metadata from one build to the
  next.  This improves the speed of incremental builds, and allows
  different commands, such as <code>build</code>
  and <code>query</code> to share the same cache of loaded packages,
  making queries very fast.
</p>
<p>
  When you run <code>bazel</code>, you're running the client.  The
  client finds the server based on the output base, which by default is
  determined by the path of the base workspace directory and your
  userid, so if you build in multiple workspaces, you'll have multiple
  output bases and thus multiple Bazel server processes.  Multiple
  users on the same workstation can build concurrently in the same
  workspace because their output bases will differ (different userids).
  If the client cannot find a running server instance, it starts a new
  one. The server process will stop after a period of inactivity (3 hours,
  by default, which can be modified using the startup option <code>--max_idle_secs</code>).
</p>
<p>
  For the most part, the fact that there is a server running is
  invisible to the user, but sometimes it helps to bear this in mind.
  For example, if you're running scripts that perform a lot of
  automated builds in different directories, it's important to ensure
  that you don't accumulate a lot of idle servers; you can do this by
  explicitly shutting them down when you're finished with them, or by
  specifying a short timeout period.
</p>
<p>
  The name of a Bazel server process appears in the output of <code>ps
  x</code> or <code>ps -e f</code> as
  <code>bazel(<i>dirname</i>)</code>, where <i>dirname</i> is the
  basename of the directory enclosing the root of your workspace directory.
  For example:
</p>
<pre>
  % ps -e f
  16143 ?        Sl     3:00 bazel(src-johndoe2) -server -Djava.library.path=...
</pre>
<p>
  This makes it easier to find out which server process belongs to a
  given workspace.  (Beware that with certain other options
  to <code>ps</code>, Bazel server processes may be named just
  <code>java</code>.)  Bazel servers can be stopped using
  the <a href='#shutdown'>shutdown</a> command.
</p>

<p>
  When running <code>bazel</code>, the client first checks that the
  server is the appropriate version; if not, the server is stopped and
  a new one started.  This ensures that the use of a long-running
  server process doesn't interfere with proper versioning.
</p>

<h2 id='bazelrc'>
  <code>.bazelrc</code>, the Bazel configuration file,
  the <code class='flag'>--bazelrc=<var>file</var></code> option, and
  the <code class='flag'>--config=<var>value</var></code> option
</h2>

<p>
  Bazel accepts many options.  Typically, some of these are varied
  frequently (for example, <code class='flag'>--subcommands</code>) while others stay the
  same across several builds (e.g. <code class='flag'>--package_path</code>).
  To avoid having to specify these unchanged options for every build (and other commands)
  Bazel allows you to specify options in a configuration file.
</p>


<h4>Where are the <code>.bazelrc</code> files?</h4>
<p>
  Bazel looks for optional configuration files in the following locations,
  in the order shown below. The options are interpreted in this order, so
  options in later files can override a value from an earlier file if a
  conflict arises. All options that control which of these files are loaded are
  startup options, which means they must occur after <code>bazel</code> and
  before the command (<code>build</code>, <code>test</code>, etc).
</p>
<ol>
  <li>
    <p><b>The system RC file</b>, unless <code class='flag'>--nosystem_rc</code> is present.</p>

    <p>Path:</p>
    <ul>
      <li>On Linux/macOS/Unixes: <code>/etc/bazel.bazelrc</code></li>
      <li>On Windows: <code>%ProgramData%\bazel.bazelrc</code></li>
    </ul>

    <p>It is not an error if this file does not exist.</p>

    <p>If another system-specified location is required, you must build a custom Bazel binary,
    overriding the <code>BAZEL_SYSTEM_BAZELRC_PATH</code> value in
    <a href="https://github.com/bazelbuild/bazel/blob/0.28.0/src/main/cpp/BUILD#L141"><code>//src/main/cpp:option_processor</code></a>.
    The system-specified location may contain environment variable references, such as
    <code>${VAR_NAME}</code> on Unix or <code>%VAR_NAME%</code> on Windows.</p>
  </li>
  <li>
    <p><b>The workspace RC file</b>, unless <code class='flag'>--noworkspace_rc</code> is
    present.</p>

    <p>Path: <code>.bazelrc</code> in your workspace directory (next to the main
    <code>WORKSPACE</code> file).</p>

    <p>It is not an error if this file does not exist.</p>
  </li>
  <li>
    <p><b>The home RC file</b>, unless <code class='flag'>--nohome_rc</code> is present.</p>

    <p>Path:</p>
    <ul>
      <li>On Linux/macOS/Unixes: <code>$HOME/.bazelrc</code></li>
      <li>On Windows: <code>%USERPROFILE%\.bazelrc</code> if exists, or
      <code>%HOME%/.bazelrc</code></li>
    </ul>

    <p>It is not an error if this file does not exist.</p>
  </li>
  <li>
    <p><b>The user-specified RC file</b>, if specified with
    <code class='flag'>-bazelrc=<var>file</var></code><p>

    <p>This flag is optional. However, if the flag is specified, then the file must exist.</p>
  </li>
</ol>
<h4><code>.bazelrc</code> syntax and semantics</h4>
<p>
  Like all UNIX "rc" files, the <code>.bazelrc</code> file is a text file with
  a line-based grammar.  Empty lines and lines starting with <code>#</code> (comments)
  are ignored.  Each line contains a sequence of words,
  which are tokenized according to the same rules as the Bourne shell.
</p>

<h5>Imports</h5>
<p>
  Lines that start with <code>import</code> or <code>try-import</code> are special: use these to
  load other "rc" files. To specify a path that is relative to the workspace root, write
  <code>import %workspace%/path/to/bazelrc</code>.
</p>
<p>
  The difference between <code>import</code> and <code>try-import</code> is that Bazel fails if
  the <code>import</code>'ed file is missing (or can't be read), but not so for a
  <code>try-import</code>'ed file.
</p>
<p>Import precedence:</p>
<ul>
  <li>Options in the imported file take precedence over options specified before
  the import statement.</li>
  <li>Options specified after the import statement take precedence over the
  options in the imported file.</li>
  <li>Options in files imported later take precedence over files
  imported earlier.</li>
</ul>

<h5>Option defaults</h5>
<p>
  Most lines of a bazelrc define default option values. The first word on each
  line specifies when these defaults are applied:
</p>
<ul>
  <li>
    <code>startup</code>: startup options, which go before the command, and
    are described in <code>bazel help startup_options</code>.
  </li>
  <li>
    <code>common</code>: options that apply to all Bazel commands.
  </li>
  <li>
    <code><i>command</i></code>: Bazel command, such as <code>build</code>
    or <code>query</code> to which the options apply. These options also apply
    to all commands that inherit from the specified command. (For example,
    <code>test</code> inherits from <code>build</code>.)
  </li>
</ul>
<p>
  Each of these lines may be used more than once and the arguments that follow
  the first word are combined as if they had appeared on a single line.
  (Users of CVS, another tool with a "Swiss army knife" command-line interface,
  will find the syntax similar to that of <code>.cvsrc</code>.) For example, the
  lines:

  <pre>build --test_tmpdir=/tmp/foo --verbose_failures
build --test_tmpdir=/tmp/bar</pre>

  are combined as:

  <pre>build --test_tmpdir=/tmp/foo --verbose_failures --test_tmpdir=/tmp/bar</pre>

  so the effective flags are <code>--verbose_failures</code> and
  <code>--test_tmpdir=/tmp/bar</code>.
</p>

<p>Option precedence:</p>
<ul>
  <li>
    Options on the command line always take precedence over those in rc files. For example, if a rc
    file says <code>build -c opt</code> but the command line flag is <code>-c dbg</code>, the
    command line flag takes precedence.
  </li>
  <li>
    <p>
      Within the rc file, precedence is governed by specificity: lines for a more specific command
      take precedence over lines for a less specific command.
    </p>
    <p>
      Specificity is defined by inheritance. Some commands inherit options from other commands,
      making the inheriting command more specific than the base command. For example
      <code>test</code> inherits from the <code>build</code> command, so all
      <code>bazel build</code> flags are valid for <code>bazel test</code>, and all
      <code>build</code> lines apply also to <code>bazel test</code> unless there's a
      <code>test</code> line for the same option. If the rc file says:

      <pre>test -c dbg --test_env=PATH
build -c opt --verbose_failures</pre>

      then <code>bazel build //foo</code> will use <code>-c opt --verbose_failures</code>, and
      <code>bazel test //foo</code> will use <code>--verbose_failures -c dbg --test_env=PATH</code>.
    </p>
    <p>
      The inheritance (specificity) graph is:
    </p>
    <ul>
      <li>Every command inherits from <code>common</code></li>
      <li>The following commands inherit from (and are more specific than) <code>build</code>:
        <code>test</code>, <code>run</code>, <code>clean</code>, <code>mobile-install</code>,
        <code>info</code>, <code>print_action</code>, <code>config</code>, <code>cquery</code>, and
        <code>aquery</code>
      </li>
      <li><code>coverage</code> inherits from <code>test</code></li>
    </ul>
  </li>
  <li>
    Two lines specifying options for the same command at equal specificity are parsed in the
    order in which they appear within the file.
  </li>
  <li>
    Because this precedence rule does not match the file order, it helps readability if you follow
    the precedence order within rc files: start with <code>common</code> options at the top, and
    end with the most-specific commands at the bottom of the file. This way, the order in which
    the options are read is the same as the order in which they are applied, which is more
    intuitive.
  </li>
</ul>

<p>
  The arguments specified on a line of an rc file may include arguments that are
  not options, such as the names of build targets, and so on. These, like the
  options specified in the same files, have lower precedence than their siblings
  on the command line, and are always prepended to the explicit list of non-
  option arguments.
</p>

<h5><code>--config</code></h5>
<p>
  In addition to setting option defaults, the rc file can be used to group
  options and provide a shorthand for common groupings. This is done by adding
  a <code>:name</code> suffix to the command. These options are ignored by
  default, but will be included when the option
  <code>--config=<var>name</var></code> is present, either on the command line
  or in a <code>.bazelrc</code> file, recursively, even inside of another
  config definition. The options specified by <code>command:name</code> will
  only be expanded for applicable commands, in the precedence order described
  above.
</p>
<p>
  Note that configs can be defined in any <code>.bazelrc</code> file, and that
  all lines of the form <code>command:name</code> (for applicable commands)
  will be expanded, across the different rc files. In order to avoid name
  conflicts, we suggest that configs defined in personal rc files start
  with an underscore ('_') to avoid unintentional name sharing.
</p>
<p>
  <code>--config=foo</code> expands to the options defined in the rc files
  "in-place" so that the options specified for the config have the same
  precedence that the <code>--config=foo</code> option had.
</p>

<h5>Example</h5>
<p>
  Here's an example <code>~/.bazelrc</code> file:
</p>
<pre>
  # Bob's Bazel option defaults

  startup --host_jvm_args=-XX:-UseParallelGC
  import /home/bobs_project/bazelrc
  build --show_timestamps --keep_going --jobs 600
  build --color=yes
  query --keep_going

  # Definition of --config=memcheck
  build:memcheck --strip=never --test_timeout=3600
</pre>


<h3 id='startup files'>
  Other files governing Bazel's behavior
</h3>

<h4 id='.bazelignore'><code>.bazelignore</code></h4>
<p>
  You can specify directories within the workspace
  that you want Bazel to ignore, such as related projects
  that use other build systems. Place a file called
  <code>.bazelignore</code> at the root of the workspace
  and add the directories you want Bazel to ignore, one per
  line. Entries are relative to the workspace root.
</p>

<h2 id='scripting'>Calling Bazel from scripts</h2>

<p>
  Bazel can be called from scripts in order to perform a build, run
  tests or query the dependency graph.  Bazel has been designed to
  enable effective scripting, but this section lists some details to
  bear in mind to make your scripts more robust.
</p>

<h3>Choosing the output base</h3>

<p>
  The <code class='flag'>--output_base</code> option controls where the Bazel process should
  write the outputs of a build to, as well as various working files used
  internally by Bazel, one of which is a lock that guards against
  concurrent mutation of the output base by multiple Bazel processes.
</p>
<p>
  Choosing the correct output base directory for your script depends
  on several factors.  If you need to put the build outputs in a
  specific location, this will dictate the output base you need to
  use.  If you are making a "read only" call to Bazel
  (e.g. <code>bazel query</code>), the locking factors will be more important.
  In particular, if you need to run multiple instances of your script
  concurrently, you will need to give each one a different (or random) output
  base.
</p>
<p>
  If you use the default output base value, you will be contending for
  the same lock used by the user's interactive Bazel commands.  If the
  user issues long-running commands such as builds, your script will
  have to wait for those commands to complete before it can continue.
</p>

<h3>Notes about Server Mode</h3>

<p>
  By default, Bazel uses a long-running <a
  href='#client/server'>server process</a> as an optimization. When running Bazel
  in a script, don't forget to call <code>shutdown</code> when you're finished
  with the server, or, specify <code class='flag'>--max_idle_secs=5</code> so
  that idle servers shut themselves down promptly.
</p>

<h3>What exit code will I get?</h3>

<p>
  Bazel attempts to differentiate failures due to the source code under
consideration from external errors that prevent Bazel from executing properly.
Bazel execution can result in following exit codes:
</p>

<b>Exit Codes common to all commands:</b>
<ul>
  <li><code>0</code> - Success</li>
  <li><code>2</code> - Command Line Problem, Bad or Illegal flags or command
    combination, or Bad Environment Variables.  Your command line must be
    modified.</li>
  <li><code>8</code> - Build Interrupted but we terminated with an orderly shutdown.</li>
  <li><code>32</code> - External Environment Failure not on this machine.</li>
  <li><code>33</code> - OOM failure. You need to modify your command line.</li>

  <li><code>34</code> - Reserved for Google-internal use.</li>
  <li><code>35</code> - Reserved for Google-internal use.</li>
  <li><code>36</code> - Local Environmental Issue, suspected permanent.</li>
  <li><code>37</code> - Unhandled Exception / Internal Bazel Error.</li>
  <li><code>38</code> - Reserved for Google-internal use.</li>
  <li><code>40-44</code> - Reserved for errors in Bazel's command line launcher,
                           <code>bazel.cc</code> that are not command line
                           related. Typically these are related to bazel server
                           being unable to launch itself.</li>
</ul>

<b>Return codes for commands <code>bazel build</code>, <code>bazel test</code>.</b>
<ul>
  <li><code>1</code> - Build failed.</li>
  <li><code>3</code> - Build OK, but some tests failed or timed out.</li>
  <li><code>4</code> - Build successful but no tests were found even though
                       testing was requested.</li>
</ul>

<b>For <code>bazel run</code>:</b>
<ul>
  <li><code>1</code> - Build failed.</li>
  <li>If the build succeeds but the executed subprocess returns a non-zero exit code it will be the
    exit code of the command as well.</li>
</ul>


<b>For <code>bazel query</code>:</b>
<ul>
  <li><code>3</code> - Partial success, but the query encountered 1 or more
                       errors in the input BUILD file set and therefore the
                       results of the operation are not 100% reliable.
                       This is likely due to a <code class='flag'>--keep_going</code> option
                       on the command line.</li>
  <li><code>7</code> - Command failure.</li>
</ul>

<p>
  Future Bazel versions may add additional exit codes, replacing generic failure
  exit code <code>1</code> with a different non-zero value with a particular
  meaning. However, all non-zero exit values will always constitute an error.
</p>

<h3>Reading the .bazelrc file</h3>

<p>
  By default, Bazel will read the <a
  href='#bazelrc'><code>.bazelrc</code> file</a> from the base workspace
  directory or the user's home directory.  Whether or not this is
  desirable is a choice for your script; if your script needs to be
  perfectly hermetic (e.g. when doing release builds), you should
  disable reading the .bazelrc file by using the option
  <code class='flag'>--bazelrc=/dev/null</code>.  If you want to perform a build
  using the user's preferred settings, the default behavior is better.
</p>

<h3>Command log</h3>

<p>
  The Bazel output is also available in a command log file which you can
  find with the following command:
</p>

<pre>
% bazel info command_log
</pre>

<p>
  The command log file contains the interleaved stdout and stderr streams
  of the most recent Bazel command. Note that running <code>bazel info</code>
  will overwrite the contents of this file, since it then becomes the most
  recent Bazel command. However, the location of the command log file will
  not change unless you change the setting of the <code class='flag'>--output_base</code>
  or <code class='flag'>--output_user_root</code> options.
</p>

<h3>Parsing output</h3>

<p>
  The Bazel output is quite easy to parse for many purposes.  Two
  options that may be helpful for your script are
  <code class='flag'>--noshow_progress</code> which suppresses progress messages,
  and <code class='flag'>--show_result <var>n</var></code>, which controls whether
  or not "build up-to-date" messages are printed; these messages may
  be parsed to discover which targets were successfully built, and the
  location of the output files they created.  Be sure to specify a
  very large value of <i>n</i> if you rely on these messages.
</p>

<h2 id='profiling'>Troubleshooting performance by profiling</h2>

<p>
  The first step in analyzing the performance of your build is to profile your build with the
  <a href='#flag--profile'><code class='flag'>--profile</code></a> option.
</p>

<p>
  The file generated by the <a href='#flag--profile'><code class='flag'>--profile</code></a>
  command is a binary file.  Once you have generated this binary profile, you can analyze it using
  Bazel's <a href='#analyze-profile'><code>analyze-profile</code></a> command. By default, it will
  print out summary analysis information for each of the specified profile datafiles. This includes
  cumulative statistics for different task types for each build phase and an analysis of the
  critical execution path.
</p>

<p>
  The first section of the default output describes an overview of the time spent on the different
  build phases:
</p>
<pre>
=== PHASE SUMMARY INFORMATION ===

Total launch phase time         6.00 ms    0.01%
Total init phase time            864 ms    1.11%
Total loading phase time       21.841 s   28.05%
Total analysis phase time       5.444 s    6.99%
Total preparation phase time     155 ms    0.20%
Total execution phase time     49.473 s   63.54%
Total finish phase time         83.9 ms    0.11%
Total run time                 77.866 s  100.00%
</pre>

<p>
  The following sections show the execution time of different tasks happening during a particular
  phase:
</p>
<pre>
=== INIT PHASE INFORMATION ===

Total init phase time                     864 ms

Total time (across all threads) spent on:
              Type    Total    Count     Average
          VFS_STAT    2.72%        1     23.5 ms
      VFS_READLINK   32.19%        1      278 ms

=== LOADING PHASE INFORMATION ===

Total loading phase time                21.841 s

Total time (across all threads) spent on:
              Type    Total    Count     Average
             SPAWN    3.26%      154      475 ms
          VFS_STAT   10.81%    65416     3.71 ms
[...]
SKYLARK_BUILTIN_FN   13.12%    45138     6.52 ms

=== ANALYSIS PHASE INFORMATION ===

Total analysis phase time                5.444 s

Total time (across all threads) spent on:
              Type    Total    Count     Average
     SKYFRAME_EVAL    9.35%        1     4.782 s
       SKYFUNCTION   89.36%    43332     1.06 ms

=== EXECUTION PHASE INFORMATION ===

Total preparation time                    155 ms
Total execution phase time              49.473 s
Total time finalizing build              83.9 ms

Action dependency map creation           0.00 ms
Actual execution time                   49.473 s

Total time (across all threads) spent on:
              Type    Total    Count     Average
            ACTION    2.25%    12229     10.2 ms
[...]
       SKYFUNCTION    1.87%   236131     0.44 ms
</pre>

<p>
  The last section shows the critical path:
</p>
<pre>
Critical path (32.078 s):
    Id        Time Percentage   Description
1109746     5.171 s   16.12%   Building [...]
1109745      164 ms    0.51%   Extracting interface [...]
1109744     4.615 s   14.39%   Building [...]
[...]
1109639     2.202 s    6.86%   Executing genrule [...]
1109637     2.00 ms    0.01%   Symlinking [...]
1109636      163 ms    0.51%   Executing genrule [...]
           4.00 ms    0.01%   [3 middleman actions]
</pre>

<p>
  You can use the following options to display more detailed information:
</p>

<ul>
  <li id='dump-text-format'><a href='#flag--dump'><code>--dump=text</code></a>
  <p>
    This option prints all recorded tasks in the order they occurred. Nested tasks are indented
    relative to the parent. For each task, output includes the following information:
  </p>
<pre>
[task type] [task description]
Thread: [thread id]    Id: [task id]     Parent: [parent task id or 0 for top-level tasks]
Start time: [time elapsed from the profiling session start]       Duration: [task duration]
[aggregated statistic for nested tasks, including count and total duration for each nested task]
</pre>
  </li>
  <li id='dump-raw-format'><a href='#flag--dump'><code>--dump=raw</code></a>
  <p>
    This option is most useful for automated analysis with scripts. It outputs each task record on
    a single line using '|' delimiter between fields. Fields are printed in the following order:
  </p>
  <ol>
    <li>thread id - integer positive number, identifies owner thread for the task</li>
    <li>task id - integer positive number, identifies specific task</li>
    <li>parent task id for nested tasks or 0 for root tasks</li>
    <li>task start time in ns, relative to the start of the profiling session</li>
    <li>task duration in ns. Please note that this will include duration of all subtasks.</li>
    <li>aggregated statistic for immediate subtasks per type. This will include type name (lower
    case), number of subtasks for that type and their cumulative duration. Types are
    space-delimited and information for single type is comma-delimited.</li>
    <li>task type (upper case)</li>
    <li>task description</li>
  </ol>

  Example:
<pre>
1|1|0|0|0||PHASE|Launch Bazel
1|2|0|6000000|0||PHASE|Initialize command
1|3|0|168963053|278111411||VFS_READLINK|/[...]
1|4|0|571055781|23495512||VFS_STAT|/[...]
1|5|0|869955040|0||PHASE|Load packages
[...]
</pre>
  </li>
  <li id='dump-html-format'><a href='#flag--html'><code>--html</code></a>
  <p>
    This option writes a file called <code>&lt;profile-file&gt;.html</code> in the directory of the
    profile file. Open it in your browser to see the visualization of the actions in your build.
    Note that the file can be quite large and may push the capabilities of your browser &ndash;
    please wait for the file to load.
  </p>
  <p>
    In most cases, the HTML output from <a href='#flag--html'><code>--html</code></a> is easier to
    read than the <a href='#flag--dump'><code>--dump</code></a> output.
    It includes a Gantt chart that displays time on the horizontal axis and
    threads of execution along the vertical axis. If you click on the Statistics link in the top
    right corner of the page, you will jump to a section that lists summary analysis information
    from your build.
  </p>
  <ul>
    <li><a href='#flag--html_details'><code>--html_details</code></a>
    <p>
    Additionally passing this option will render a more detailed execution chart and additional
    tables on the performance of built-in and user-defined Skylark functions. Beware that this
    increases the file size and the load on the browser considerably.
    </p>
    </li>
  </ul></li>
</ul>

<p>If Bazel appears to be hung, you can hit <kbd><kbd>ctrl</kbd> + <kbd>\</kbd></kbd> or send
  Bazel a <code>SIGQUIT</code> signal (<code>kill -3 $(bazel info server_pid)</code>) to get a
  thread dump in the file <code>$(bazel info output_base)/server/jvm.out</code>.
</p>

<p>
  Since you may not be able to run <code>bazel info</code> if bazel is hung, the
  <code>output_base</code> directory is usually the parent of the <code>bazel-&lt;workspace&gt;</code>
  symlink in your workspace directory.
</p>