| // Copyright 2016 The Bazel Authors. All rights reserved. | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //    http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 |  | 
 | #include <stdlib.h> | 
 | #include <algorithm> | 
 | #include <cstdio> | 
 |  | 
 | #include "third_party/ijar/common.h" | 
 | #include "third_party/ijar/zlib_client.h" | 
 | #include <zlib.h> | 
 |  | 
 | namespace devtools_ijar { | 
 |  | 
 | u4 ComputeCrcChecksum(u1 *buf, size_t length) { | 
 |   return crc32(0, buf, length); | 
 | } | 
 |  | 
 | size_t TryDeflate(u1 *buf, size_t length) { | 
 |   u1 *outbuf = reinterpret_cast<u1 *>(malloc(length)); | 
 |   z_stream stream; | 
 |  | 
 |   // Initialize the z_stream strcut for reading from buf and wrinting in outbuf. | 
 |   stream.zalloc = Z_NULL; | 
 |   stream.zfree = Z_NULL; | 
 |   stream.opaque = Z_NULL; | 
 |   stream.total_in = length; | 
 |   stream.avail_in = length; | 
 |   stream.total_out = length; | 
 |   stream.avail_out = length; | 
 |   stream.next_in = buf; | 
 |   stream.next_out = outbuf; | 
 |  | 
 |   // deflateInit2 negative windows size prevent the zlib wrapper to be used. | 
 |   if (deflateInit2(&stream, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -MAX_WBITS, 8, | 
 |                    Z_DEFAULT_STRATEGY) != Z_OK) { | 
 |     // Failure to compress => return the buffer uncompressed | 
 |     free(outbuf); | 
 |     return length; | 
 |   } | 
 |  | 
 |   if (deflate(&stream, Z_FINISH) == Z_STREAM_END) { | 
 |     // Compression successful and fits in outbuf, let's copy the result in buf. | 
 |     length = stream.total_out; | 
 |     memcpy(buf, outbuf, length); | 
 |   } | 
 |  | 
 |   deflateEnd(&stream); | 
 |   free(outbuf); | 
 |  | 
 |   // Return the length of the resulting buffer | 
 |   return length; | 
 | } | 
 |  | 
 | Decompressor::Decompressor() { | 
 |   uncompressed_data_allocated_ = INITIAL_BUFFER_SIZE; | 
 |   uncompressed_data_ = | 
 |       reinterpret_cast<u1 *>(malloc(uncompressed_data_allocated_)); | 
 | } | 
 |  | 
 | Decompressor::~Decompressor() { free(uncompressed_data_); } | 
 |  | 
 | DecompressedFile *Decompressor::UncompressFile(const u1 *buffer, | 
 |                                                size_t bytes_avail) { | 
 |   z_stream stream; | 
 |  | 
 |   stream.zalloc = Z_NULL; | 
 |   stream.zfree = Z_NULL; | 
 |   stream.opaque = Z_NULL; | 
 |   stream.avail_in = bytes_avail; | 
 |   stream.next_in = const_cast<Bytef*>(reinterpret_cast<const Bytef*>(buffer)); | 
 |  | 
 |   int ret = inflateInit2(&stream, -MAX_WBITS); | 
 |   if (ret != Z_OK) { | 
 |     error("inflateInit: %d\n", ret); | 
 |     return NULL; | 
 |   } | 
 |  | 
 |   int uncompressed_until_now = 0; | 
 |  | 
 |   while (true) { | 
 |     stream.avail_out = uncompressed_data_allocated_ - uncompressed_until_now; | 
 |     stream.next_out = uncompressed_data_ + uncompressed_until_now; | 
 |     int old_avail_out = stream.avail_out; | 
 |  | 
 |     ret = inflate(&stream, Z_SYNC_FLUSH); | 
 |     int uncompressed_now = old_avail_out - stream.avail_out; | 
 |     uncompressed_until_now += uncompressed_now; | 
 |  | 
 |     switch (ret) { | 
 |       case Z_STREAM_END: { | 
 |         struct DecompressedFile *decompressedFile = | 
 |             reinterpret_cast<DecompressedFile *>( | 
 |                 malloc(sizeof(DecompressedFile))); | 
 |         // zlib said that there is no more data to decompress. | 
 |         u1 *new_p = reinterpret_cast<u1 *>(stream.next_in); | 
 |         decompressedFile->compressed_size = new_p - buffer; | 
 |         decompressedFile->uncompressed_size = uncompressed_until_now; | 
 |         decompressedFile->uncompressed_data = uncompressed_data_; | 
 |         inflateEnd(&stream); | 
 |         return decompressedFile; | 
 |       } | 
 |  | 
 |       case Z_OK: { | 
 |         // zlib said that there is no more room in the buffer allocated for | 
 |         // the decompressed data. Enlarge that buffer and try again. | 
 |  | 
 |         if (uncompressed_data_allocated_ == MAX_BUFFER_SIZE) { | 
 |           error( | 
 |               "ijar does not support decompressing files " | 
 |               "larger than %dMB.\n", | 
 |               static_cast<int>((MAX_BUFFER_SIZE / (1024 * 1024)))); | 
 |           return NULL; | 
 |         } | 
 |  | 
 |         uncompressed_data_allocated_ *= 2; | 
 |         if (uncompressed_data_allocated_ > MAX_BUFFER_SIZE) { | 
 |           uncompressed_data_allocated_ = MAX_BUFFER_SIZE; | 
 |         } | 
 |  | 
 |         uncompressed_data_ = reinterpret_cast<u1 *>( | 
 |             realloc(uncompressed_data_, uncompressed_data_allocated_)); | 
 |         break; | 
 |       } | 
 |  | 
 |       case Z_DATA_ERROR: | 
 |       case Z_BUF_ERROR: | 
 |       case Z_STREAM_ERROR: | 
 |       case Z_NEED_DICT: | 
 |       default: { | 
 |         error("zlib returned error code %d during inflate.\n", ret); | 
 |         return NULL; | 
 |       } | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | char *Decompressor::GetError() { | 
 |   if (errmsg[0] == 0) { | 
 |     return NULL; | 
 |   } | 
 |   return errmsg; | 
 | } | 
 |  | 
 | int Decompressor::error(const char *fmt, ...) { | 
 |   va_list ap; | 
 |   va_start(ap, fmt); | 
 |   vsnprintf(errmsg, 4 * PATH_MAX, fmt, ap); | 
 |   va_end(ap); | 
 |   return -1; | 
 | } | 
 | }  // namespace devtools_ijar |