src/main/protobuf/analysis_v2.proto - bazel - Git at Google

 // Copyright 2018 The Bazel Authors. All rights reserved.
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //    http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 syntax = "proto3";

 package analysis;

 import "src/main/protobuf/build.proto";

 option java_package = "com.google.devtools.build.lib.analysis";
 option java_outer_classname = "AnalysisProtosV2";

 // Container for the action graph properties.
 message ActionGraphContainer {
   repeated Artifact artifacts = 1;
   repeated Action actions = 2;
   repeated Target targets = 3;
   repeated DepSetOfFiles dep_set_of_files = 4;
   repeated Configuration configuration = 5;
   repeated AspectDescriptor aspect_descriptors = 6;
   repeated RuleClass rule_classes = 7;
   repeated PathFragment path_fragments = 8;
 }

 // Represents a single artifact, whether it's a source file or a derived output
 // file.
 message Artifact {
   // Identifier for this artifact; this is a uint32, only valid for this
   // particular dump of the analysis.
   uint32 id = 1;

   // The id of the PathFragment that represents the relative path of the file
   // within the execution root.
   uint32 path_fragment_id = 2;

   // True iff the artifact is a tree artifact, i.e. the above exec_path refers
   // a directory.
   bool is_tree_artifact = 3;
 }

 // Represents a single action, which is a function from Artifact(s) to
 // Artifact(s).
 message Action {
   // The target that was responsible for the creation of the action.
   uint32 target_id = 1;

   // The aspects that were responsible for the creation of the action (if any).
   // In the case of aspect-on-aspect, AspectDescriptors are listed in
   // topological order of the dependency graph.
   // e.g. [A, B] would imply that aspect A is applied on top of aspect B.
   repeated uint32 aspect_descriptor_ids = 2;

   // Encodes all significant behavior that might affect the output. The key
   // must change if the work performed by the execution of this action changes.
   // Note that the key doesn't include checksums of the input files.
   string action_key = 3;

   // The mnemonic for this kind of action.
   string mnemonic = 4;

   // The configuration under which this action is executed.
   uint32 configuration_id = 5;

   // The command line arguments of the action. This will be only set if
   // explicitly requested.
   repeated string arguments = 6;

   // The list of environment variables to be set before executing the command.
   repeated KeyValuePair environment_variables = 7;

   // The set of input dep sets that the action depends upon. If the action does
   // input discovery, the contents of this set might change during execution.
   repeated uint32 input_dep_set_ids = 8;

   // The list of Artifact IDs that represent the output files that this action
   // will generate.
   repeated uint32 output_ids = 9;

   // True iff the action does input discovery during execution.
   bool discovers_inputs = 10;

   // Execution info for the action.  Remote execution services may use this
   // information to modify the execution environment, but actions will
   // generally not be aware of it.
   repeated KeyValuePair execution_info = 11;

   // The list of param files. This will be only set if explicitly requested.
   repeated ParamFile param_files = 12;

   // The id to an Artifact that is the primary output of this action.
   uint32 primary_output_id = 13;

   // The execution platform for this action. Empty if the action has no
   // execution platform.
   string execution_platform = 14;

   // The template content of the action, if it is TemplateExpand action.
   string template_content = 15;

   // The list of substitution should be performed on the template. The key is
   // the string to be substituted and the value is the string to be substituted
   // to.
   repeated KeyValuePair substitutions = 16;

   // The contents of the file for the ctx.actions.write() action
   // (guarded by the --include_file_write_contents flag).
   string file_contents = 17;

   // The target of the symlink created by UnresolvedSymlink actions.
   // For regular Symlink actions, the target is represented as an input.
   string unresolved_symlink_target = 18;

   // If FileWrite actions should make their output executable.
   // (ctx.actions.write(is_executable=True))
   bool is_executable = 19;
 }

 // Represents a single target (without configuration information) that is
 // associated with an action.
 message Target {
   // Identifier for this target; this is a uint32, only valid for this
   // particular dump of the analysis.
   uint32 id = 1;

   // Label of the target, e.g. //foo:bar.
   string label = 2;

   // Class of the rule.
   uint32 rule_class_id = 3;
 }

 message RuleClass {
   // Identifier for this rule class; this is a uint32, only valid for
   // this particular dump of the analysis.
   uint32 id = 1;

   // Name of the rule class, e.g. cc_library.
   string name = 2;
 }

 // Represents an invocation specific descriptor of an aspect.
 message AspectDescriptor {
   // Identifier for this aspect descriptor; this is a uint32, only valid
   // for the particular dump of the analysis.
   uint32 id = 1;

   // The name of the corresponding aspect. For native aspects, it's the Java
   // class name, for Starlark aspects it's the bzl file followed by a % sign
   // followed by the name of the aspect.
   string name = 2;

   // The list of parameters bound to a particular invocation of that aspect on
   // a target. Note that aspects can be executed multiple times on the same
   // target in different order.
   repeated KeyValuePair parameters = 3;
 }

 message DepSetOfFiles {
   // Identifier for this named set of files; this is a uint32, only
   // valid for the particular dump of the analysis.
   uint32 id = 1;

   // Other transitively included named set of files.
   repeated uint32 transitive_dep_set_ids = 2;

   // The list of input artifact IDs that are immediately contained in this set.
   repeated uint32 direct_artifact_ids = 3;
 }

 message Configuration {
   // Identifier for this configuration; this is a uint32, only valid for
   // the particular dump of the analysis.
   uint32 id = 1;

   // The mnemonic representing the build configuration.
   string mnemonic = 2;

   // The platform string.
   string platform_name = 3;

   // The checksum representation of the configuration options;
   string checksum = 4;

   // Whether this configuration is used for building tools.
   bool is_tool = 5;
 }

 message KeyValuePair {
   // The variable name.
   string key = 1;

   // The variable value.
   string value = 2;
 }

 message ConfiguredTarget {
   // The target. We use blaze_query.Target defined in build.proto instead of
   // the Target defined in this file because blaze_query.Target is much heavier
   // and will output proto results similar to what users are familiar with from
   // regular blaze query.
   blaze_query.Target target = 1;

   // DEPRECATED. Use configuration_id instead.
   Configuration configuration = 2 [deprecated = true];

   // The id of the configuration this target is configured for. The actual
   // Configuration message can be found in CqueryResults. If the target doesn't
   // have a configuration, the value will be 0.
   uint32 configuration_id = 3;
 }

 // Container for cquery results
 message CqueryResult {
   // All the configuredtargets returns by cquery
   repeated ConfiguredTarget results = 1;

   // All the Configurations referenced by results.
   repeated Configuration configurations = 2;
 }

 // Content of a param file.
 message ParamFile {
   // The exec path of the param file artifact.
   string exec_path = 1;

   // The arguments in the param file.
   // Each argument corresponds to a line in the param file.
   repeated string arguments = 2;
 }

 // The path fragment that makes up a full path.
 message PathFragment {
   // Identifier for this path fragment.
   uint32 id = 1;

   // The label of the section in the path.
   string label = 2;

   // The id of the parent path fragment.
   uint32 parent_id = 3;
 }
	// Copyright 2018 The Bazel Authors. All rights reserved.
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	syntax = "proto3";

	package analysis;

	import "src/main/protobuf/build.proto";

	option java_package = "com.google.devtools.build.lib.analysis";
	option java_outer_classname = "AnalysisProtosV2";

	// Container for the action graph properties.
	message ActionGraphContainer {
	repeated Artifact artifacts = 1;
	repeated Action actions = 2;
	repeated Target targets = 3;
	repeated DepSetOfFiles dep_set_of_files = 4;
	repeated Configuration configuration = 5;
	repeated AspectDescriptor aspect_descriptors = 6;
	repeated RuleClass rule_classes = 7;
	repeated PathFragment path_fragments = 8;
	}

	// Represents a single artifact, whether it's a source file or a derived output
	// file.
	message Artifact {
	// Identifier for this artifact; this is a uint32, only valid for this
	// particular dump of the analysis.
	uint32 id = 1;

	// The id of the PathFragment that represents the relative path of the file
	// within the execution root.
	uint32 path_fragment_id = 2;

	// True iff the artifact is a tree artifact, i.e. the above exec_path refers
	// a directory.
	bool is_tree_artifact = 3;
	}

	// Represents a single action, which is a function from Artifact(s) to
	// Artifact(s).
	message Action {
	// The target that was responsible for the creation of the action.
	uint32 target_id = 1;

	// The aspects that were responsible for the creation of the action (if any).
	// In the case of aspect-on-aspect, AspectDescriptors are listed in
	// topological order of the dependency graph.
	// e.g. [A, B] would imply that aspect A is applied on top of aspect B.
	repeated uint32 aspect_descriptor_ids = 2;

	// Encodes all significant behavior that might affect the output. The key
	// must change if the work performed by the execution of this action changes.
	// Note that the key doesn't include checksums of the input files.
	string action_key = 3;

	// The mnemonic for this kind of action.
	string mnemonic = 4;

	// The configuration under which this action is executed.
	uint32 configuration_id = 5;

	// The command line arguments of the action. This will be only set if
	// explicitly requested.
	repeated string arguments = 6;

	// The list of environment variables to be set before executing the command.
	repeated KeyValuePair environment_variables = 7;

	// The set of input dep sets that the action depends upon. If the action does
	// input discovery, the contents of this set might change during execution.
	repeated uint32 input_dep_set_ids = 8;

	// The list of Artifact IDs that represent the output files that this action
	// will generate.
	repeated uint32 output_ids = 9;

	// True iff the action does input discovery during execution.
	bool discovers_inputs = 10;

	// Execution info for the action. Remote execution services may use this
	// information to modify the execution environment, but actions will
	// generally not be aware of it.
	repeated KeyValuePair execution_info = 11;

	// The list of param files. This will be only set if explicitly requested.
	repeated ParamFile param_files = 12;

	// The id to an Artifact that is the primary output of this action.
	uint32 primary_output_id = 13;

	// The execution platform for this action. Empty if the action has no
	// execution platform.
	string execution_platform = 14;

	// The template content of the action, if it is TemplateExpand action.
	string template_content = 15;

	// The list of substitution should be performed on the template. The key is
	// the string to be substituted and the value is the string to be substituted
	// to.
	repeated KeyValuePair substitutions = 16;

	// The contents of the file for the ctx.actions.write() action
	// (guarded by the --include_file_write_contents flag).
	string file_contents = 17;

	// The target of the symlink created by UnresolvedSymlink actions.
	// For regular Symlink actions, the target is represented as an input.
	string unresolved_symlink_target = 18;

	// If FileWrite actions should make their output executable.
	// (ctx.actions.write(is_executable=True))
	bool is_executable = 19;
	}

	// Represents a single target (without configuration information) that is
	// associated with an action.
	message Target {
	// Identifier for this target; this is a uint32, only valid for this
	// particular dump of the analysis.
	uint32 id = 1;

	// Label of the target, e.g. //foo:bar.
	string label = 2;

	// Class of the rule.
	uint32 rule_class_id = 3;
	}

	message RuleClass {
	// Identifier for this rule class; this is a uint32, only valid for
	// this particular dump of the analysis.
	uint32 id = 1;

	// Name of the rule class, e.g. cc_library.
	string name = 2;
	}

	// Represents an invocation specific descriptor of an aspect.
	message AspectDescriptor {
	// Identifier for this aspect descriptor; this is a uint32, only valid
	// for the particular dump of the analysis.
	uint32 id = 1;

	// The name of the corresponding aspect. For native aspects, it's the Java
	// class name, for Starlark aspects it's the bzl file followed by a % sign
	// followed by the name of the aspect.
	string name = 2;

	// The list of parameters bound to a particular invocation of that aspect on
	// a target. Note that aspects can be executed multiple times on the same
	// target in different order.
	repeated KeyValuePair parameters = 3;
	}

	message DepSetOfFiles {
	// Identifier for this named set of files; this is a uint32, only
	// valid for the particular dump of the analysis.
	uint32 id = 1;

	// Other transitively included named set of files.
	repeated uint32 transitive_dep_set_ids = 2;

	// The list of input artifact IDs that are immediately contained in this set.
	repeated uint32 direct_artifact_ids = 3;
	}

	message Configuration {
	// Identifier for this configuration; this is a uint32, only valid for
	// the particular dump of the analysis.
	uint32 id = 1;

	// The mnemonic representing the build configuration.
	string mnemonic = 2;

	// The platform string.
	string platform_name = 3;

	// The checksum representation of the configuration options;
	string checksum = 4;

	// Whether this configuration is used for building tools.
	bool is_tool = 5;
	}

	message KeyValuePair {
	// The variable name.
	string key = 1;

	// The variable value.
	string value = 2;
	}

	message ConfiguredTarget {
	// The target. We use blaze_query.Target defined in build.proto instead of
	// the Target defined in this file because blaze_query.Target is much heavier
	// and will output proto results similar to what users are familiar with from
	// regular blaze query.
	blaze_query.Target target = 1;

	// DEPRECATED. Use configuration_id instead.
	Configuration configuration = 2 [deprecated = true];

	// The id of the configuration this target is configured for. The actual
	// Configuration message can be found in CqueryResults. If the target doesn't
	// have a configuration, the value will be 0.
	uint32 configuration_id = 3;
	}

	// Container for cquery results
	message CqueryResult {
	// All the configuredtargets returns by cquery
	repeated ConfiguredTarget results = 1;

	// All the Configurations referenced by results.
	repeated Configuration configurations = 2;
	}

	// Content of a param file.
	message ParamFile {
	// The exec path of the param file artifact.
	string exec_path = 1;

	// The arguments in the param file.
	// Each argument corresponds to a line in the param file.
	repeated string arguments = 2;
	}

	// The path fragment that makes up a full path.
	message PathFragment {
	// Identifier for this path fragment.
	uint32 id = 1;

	// The label of the section in the path.
	string label = 2;

	// The id of the parent path fragment.
	uint32 parent_id = 3;
	}