third_party/protobuf/3.6.1/objectivec/GPBDictionary.h - bazel - Git at Google

 // Protocol Buffers - Google's data interchange format
 // Copyright 2008 Google Inc.  All rights reserved.
 // https://developers.google.com/protocol-buffers/
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are
 // met:
 //
 //     * Redistributions of source code must retain the above copyright
 // notice, this list of conditions and the following disclaimer.
 //     * Redistributions in binary form must reproduce the above
 // copyright notice, this list of conditions and the following disclaimer
 // in the documentation and/or other materials provided with the
 // distribution.
 //     * Neither the name of Google Inc. nor the names of its
 // contributors may be used to endorse or promote products derived from
 // this software without specific prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 #import <Foundation/Foundation.h>

 #import "GPBRuntimeTypes.h"

 // Note on naming: for the classes holding numeric values, a more natural
 // naming of the method might be things like "-valueForKey:",
 // "-setValue:forKey:"; etc. But those selectors are also defined by Key Value
 // Coding (KVC) as categories on NSObject. So "overloading" the selectors with
 // other meanings can cause warnings (based on compiler settings), but more
 // importantly, some of those selector get called as KVC breaks up keypaths.
 // So if those selectors are used, using KVC will compile cleanly, but could
 // crash as it invokes those selectors with the wrong types of arguments.

 NS_ASSUME_NONNULL_BEGIN

 //%PDDM-EXPAND DECLARE_DICTIONARIES()
 // This block of code is generated, do not edit it directly.

 #pragma mark - UInt32 -> UInt32

 /**
  * Class used for map fields of <uint32_t, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32UInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const uint32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32UInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(uint32_t key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32UInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Int32

 /**
  * Class used for map fields of <uint32_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32Int32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const uint32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32Int32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(uint32_t key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32Int32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> UInt64

 /**
  * Class used for map fields of <uint32_t, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32UInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const uint32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32UInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(uint32_t key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32UInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Int64

 /**
  * Class used for map fields of <uint32_t, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32Int64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const uint32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32Int64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(uint32_t key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32Int64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Bool

 /**
  * Class used for map fields of <uint32_t, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32BoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const uint32_t [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32BoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(uint32_t key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32BoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Float

 /**
  * Class used for map fields of <uint32_t, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32FloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const uint32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32FloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(uint32_t key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32FloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Double

 /**
  * Class used for map fields of <uint32_t, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32DoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const uint32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32DoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(uint32_t key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32DoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Enum

 /**
  * Class used for map fields of <uint32_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32EnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const uint32_t [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32EnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(uint32_t key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(uint32_t key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBUInt32EnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(uint32_t)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt32 -> Object

 /**
  * Class used for map fields of <uint32_t, ObjectType>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt32ObjectDictionary<__covariant ObjectType> : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param objects      The values to be placed in this dictionary.
  * @param keys         The keys under which to store the values.
  * @param count        The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithObjects:(const ObjectType __nonnull GPB_UNSAFE_UNRETAINED [__nullable])objects
                         forKeys:(const uint32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt32ObjectDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Fetches the object stored under the given key.
  *
  * @param key Key under which the value is stored, if present.
  *
  * @return The object if found, nil otherwise.
  **/
 - (ObjectType)objectForKey:(uint32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:         The key for the current entry.
  *   **object**:      The value for the current entry
  *   **stop**:        A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndObjectsUsingBlock:
     (void (^)(uint32_t key, ObjectType object, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt32ObjectDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param object     The value to set.
  * @param key        The key under which to store the value.
  **/
 - (void)setObject:(ObjectType)object forKey:(uint32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeObjectForKey:(uint32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> UInt32

 /**
  * Class used for map fields of <int32_t, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32UInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const int32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32UInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(int32_t key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32UInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Int32

 /**
  * Class used for map fields of <int32_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32Int32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const int32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32Int32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(int32_t key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32Int32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> UInt64

 /**
  * Class used for map fields of <int32_t, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32UInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const int32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32UInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(int32_t key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32UInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Int64

 /**
  * Class used for map fields of <int32_t, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32Int64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const int32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32Int64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(int32_t key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32Int64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Bool

 /**
  * Class used for map fields of <int32_t, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32BoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const int32_t [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32BoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(int32_t key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32BoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Float

 /**
  * Class used for map fields of <int32_t, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32FloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const int32_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32FloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(int32_t key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32FloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Double

 /**
  * Class used for map fields of <int32_t, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32DoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const int32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32DoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(int32_t key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32DoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Enum

 /**
  * Class used for map fields of <int32_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32EnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const int32_t [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBInt32EnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(int32_t key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(int32_t key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBInt32EnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(int32_t)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int32 -> Object

 /**
  * Class used for map fields of <int32_t, ObjectType>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt32ObjectDictionary<__covariant ObjectType> : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param objects      The values to be placed in this dictionary.
  * @param keys         The keys under which to store the values.
  * @param count        The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithObjects:(const ObjectType __nonnull GPB_UNSAFE_UNRETAINED [__nullable])objects
                         forKeys:(const int32_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt32ObjectDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Fetches the object stored under the given key.
  *
  * @param key Key under which the value is stored, if present.
  *
  * @return The object if found, nil otherwise.
  **/
 - (ObjectType)objectForKey:(int32_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:         The key for the current entry.
  *   **object**:      The value for the current entry
  *   **stop**:        A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndObjectsUsingBlock:
     (void (^)(int32_t key, ObjectType object, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt32ObjectDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param object     The value to set.
  * @param key        The key under which to store the value.
  **/
 - (void)setObject:(ObjectType)object forKey:(int32_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeObjectForKey:(int32_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> UInt32

 /**
  * Class used for map fields of <uint64_t, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64UInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const uint64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64UInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(uint64_t key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64UInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Int32

 /**
  * Class used for map fields of <uint64_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64Int32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const uint64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64Int32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(uint64_t key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64Int32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> UInt64

 /**
  * Class used for map fields of <uint64_t, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64UInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const uint64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64UInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(uint64_t key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64UInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Int64

 /**
  * Class used for map fields of <uint64_t, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64Int64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const uint64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64Int64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(uint64_t key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64Int64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Bool

 /**
  * Class used for map fields of <uint64_t, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64BoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const uint64_t [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64BoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(uint64_t key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64BoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Float

 /**
  * Class used for map fields of <uint64_t, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64FloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const uint64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64FloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(uint64_t key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64FloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Double

 /**
  * Class used for map fields of <uint64_t, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64DoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const uint64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64DoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(uint64_t key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64DoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Enum

 /**
  * Class used for map fields of <uint64_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64EnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const uint64_t [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64EnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(uint64_t key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(uint64_t key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBUInt64EnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(uint64_t)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - UInt64 -> Object

 /**
  * Class used for map fields of <uint64_t, ObjectType>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBUInt64ObjectDictionary<__covariant ObjectType> : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param objects      The values to be placed in this dictionary.
  * @param keys         The keys under which to store the values.
  * @param count        The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithObjects:(const ObjectType __nonnull GPB_UNSAFE_UNRETAINED [__nullable])objects
                         forKeys:(const uint64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBUInt64ObjectDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Fetches the object stored under the given key.
  *
  * @param key Key under which the value is stored, if present.
  *
  * @return The object if found, nil otherwise.
  **/
 - (ObjectType)objectForKey:(uint64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:         The key for the current entry.
  *   **object**:      The value for the current entry
  *   **stop**:        A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndObjectsUsingBlock:
     (void (^)(uint64_t key, ObjectType object, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBUInt64ObjectDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param object     The value to set.
  * @param key        The key under which to store the value.
  **/
 - (void)setObject:(ObjectType)object forKey:(uint64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeObjectForKey:(uint64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> UInt32

 /**
  * Class used for map fields of <int64_t, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64UInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const int64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64UInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(int64_t key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64UInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Int32

 /**
  * Class used for map fields of <int64_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64Int32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const int64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64Int32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(int64_t key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64Int32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> UInt64

 /**
  * Class used for map fields of <int64_t, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64UInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const int64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64UInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(int64_t key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64UInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Int64

 /**
  * Class used for map fields of <int64_t, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64Int64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const int64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64Int64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(int64_t key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64Int64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Bool

 /**
  * Class used for map fields of <int64_t, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64BoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const int64_t [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64BoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(int64_t key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64BoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Float

 /**
  * Class used for map fields of <int64_t, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64FloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const int64_t [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64FloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(int64_t key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64FloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Double

 /**
  * Class used for map fields of <int64_t, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64DoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const int64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64DoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(int64_t key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64DoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Enum

 /**
  * Class used for map fields of <int64_t, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64EnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const int64_t [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBInt64EnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(int64_t key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(int64_t key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBInt64EnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(int64_t)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Int64 -> Object

 /**
  * Class used for map fields of <int64_t, ObjectType>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBInt64ObjectDictionary<__covariant ObjectType> : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param objects      The values to be placed in this dictionary.
  * @param keys         The keys under which to store the values.
  * @param count        The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithObjects:(const ObjectType __nonnull GPB_UNSAFE_UNRETAINED [__nullable])objects
                         forKeys:(const int64_t [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBInt64ObjectDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Fetches the object stored under the given key.
  *
  * @param key Key under which the value is stored, if present.
  *
  * @return The object if found, nil otherwise.
  **/
 - (ObjectType)objectForKey:(int64_t)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:         The key for the current entry.
  *   **object**:      The value for the current entry
  *   **stop**:        A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndObjectsUsingBlock:
     (void (^)(int64_t key, ObjectType object, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBInt64ObjectDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param object     The value to set.
  * @param key        The key under which to store the value.
  **/
 - (void)setObject:(ObjectType)object forKey:(int64_t)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeObjectForKey:(int64_t)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> UInt32

 /**
  * Class used for map fields of <BOOL, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolUInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const BOOL [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolUInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(BOOL key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolUInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Int32

 /**
  * Class used for map fields of <BOOL, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const BOOL [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(BOOL key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> UInt64

 /**
  * Class used for map fields of <BOOL, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolUInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const BOOL [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolUInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(BOOL key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolUInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Int64

 /**
  * Class used for map fields of <BOOL, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const BOOL [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(BOOL key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Bool

 /**
  * Class used for map fields of <BOOL, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolBoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const BOOL [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolBoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(BOOL key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolBoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Float

 /**
  * Class used for map fields of <BOOL, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolFloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const BOOL [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolFloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(BOOL key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolFloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Double

 /**
  * Class used for map fields of <BOOL, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolDoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const BOOL [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolDoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(BOOL key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolDoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Enum

 /**
  * Class used for map fields of <BOOL, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolEnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const BOOL [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBBoolEnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(BOOL key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(BOOL key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBBoolEnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(BOOL)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - Bool -> Object

 /**
  * Class used for map fields of <BOOL, ObjectType>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBBoolObjectDictionary<__covariant ObjectType> : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param objects      The values to be placed in this dictionary.
  * @param keys         The keys under which to store the values.
  * @param count        The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithObjects:(const ObjectType __nonnull GPB_UNSAFE_UNRETAINED [__nullable])objects
                         forKeys:(const BOOL [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBBoolObjectDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Fetches the object stored under the given key.
  *
  * @param key Key under which the value is stored, if present.
  *
  * @return The object if found, nil otherwise.
  **/
 - (ObjectType)objectForKey:(BOOL)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:         The key for the current entry.
  *   **object**:      The value for the current entry
  *   **stop**:        A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndObjectsUsingBlock:
     (void (^)(BOOL key, ObjectType object, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBBoolObjectDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param object     The value to set.
  * @param key        The key under which to store the value.
  **/
 - (void)setObject:(ObjectType)object forKey:(BOOL)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeObjectForKey:(BOOL)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> UInt32

 /**
  * Class used for map fields of <NSString, uint32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringUInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt32s:(const uint32_t [__nullable])values
                         forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringUInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt32:(nullable uint32_t *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt32sUsingBlock:
     (void (^)(NSString *key, uint32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringUInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt32:(uint32_t)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt32ForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Int32

 /**
  * Class used for map fields of <NSString, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringInt32Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt32s:(const int32_t [__nullable])values
                        forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringInt32Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt32:(nullable int32_t *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt32sUsingBlock:
     (void (^)(NSString *key, int32_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringInt32Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt32:(int32_t)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt32ForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> UInt64

 /**
  * Class used for map fields of <NSString, uint64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringUInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithUInt64s:(const uint64_t [__nullable])values
                         forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringUInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getUInt64:(nullable uint64_t *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndUInt64sUsingBlock:
     (void (^)(NSString *key, uint64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringUInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setUInt64:(uint64_t)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeUInt64ForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Int64

 /**
  * Class used for map fields of <NSString, int64_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringInt64Dictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithInt64s:(const int64_t [__nullable])values
                        forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringInt64Dictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getInt64:(nullable int64_t *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndInt64sUsingBlock:
     (void (^)(NSString *key, int64_t value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringInt64Dictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setInt64:(int64_t)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeInt64ForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Bool

 /**
  * Class used for map fields of <NSString, BOOL>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringBoolDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithBools:(const BOOL [__nullable])values
                       forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                         count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringBoolDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getBool:(nullable BOOL *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndBoolsUsingBlock:
     (void (^)(NSString *key, BOOL value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringBoolDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setBool:(BOOL)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeBoolForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Float

 /**
  * Class used for map fields of <NSString, float>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringFloatDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithFloats:(const float [__nullable])values
                        forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                          count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringFloatDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getFloat:(nullable float *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndFloatsUsingBlock:
     (void (^)(NSString *key, float value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringFloatDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setFloat:(float)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeFloatForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Double

 /**
  * Class used for map fields of <NSString, double>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringDoubleDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;

 /**
  * Initializes this dictionary, copying the given values and keys.
  *
  * @param values      The values to be placed in this dictionary.
  * @param keys        The keys under which to store the values.
  * @param count       The number of elements to copy into the dictionary.
  *
  * @return A newly initialized dictionary with a copy of the values and keys.
  **/
 - (instancetype)initWithDoubles:(const double [__nullable])values
                         forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                           count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes this dictionary, copying the entries from the given dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to this dictionary.
  *
  * @return A newly initialized dictionary with the entries of the given dictionary.
  **/
 - (instancetype)initWithDictionary:(GPBStringDoubleDictionary *)dictionary;

 /**
  * Initializes this dictionary with the requested capacity.
  *
  * @param numItems Number of items needed for this dictionary.
  *
  * @return A newly initialized dictionary with the requested capacity.
  **/
 - (instancetype)initWithCapacity:(NSUInteger)numItems;

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getDouble:(nullable double *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndDoublesUsingBlock:
     (void (^)(NSString *key, double value, BOOL *stop))block;

 /**
  * Adds the keys and values from another dictionary.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addEntriesFromDictionary:(GPBStringDoubleDictionary *)otherDictionary;

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setDouble:(double)value forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeDoubleForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 #pragma mark - String -> Enum

 /**
  * Class used for map fields of <NSString, int32_t>
  * values. This performs better than boxing into NSNumbers in NSDictionaries.
  *
  * @note This class is not meant to be subclassed.
  **/
 @interface GPBStringEnumDictionary : NSObject <NSCopying>

 /** Number of entries stored in this dictionary. */
 @property(nonatomic, readonly) NSUInteger count;
 /** The validation function to check if the enums are valid. */
 @property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;

 /**
  * Initializes a dictionary with the given validation function.
  *
  * @param func The enum validation function for the dictionary.
  *
  * @return A newly initialized dictionary.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;

 /**
  * Initializes a dictionary with the entries given.
  *
  * @param func   The enum validation function for the dictionary.
  * @param values The raw enum values values to be placed in the dictionary.
  * @param keys   The keys under which to store the values.
  * @param count  The number of entries to store in the dictionary.
  *
  * @return A newly initialized dictionary with the keys and values in it.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                  rawValues:(const int32_t [__nullable])values
                                    forKeys:(const NSString * __nonnull GPB_UNSAFE_UNRETAINED [__nullable])keys
                                      count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;

 /**
  * Initializes a dictionary with the entries from the given.
  * dictionary.
  *
  * @param dictionary Dictionary containing the entries to add to the dictionary.
  *
  * @return A newly initialized dictionary with the entries from the given
  *         dictionary in it.
  **/
 - (instancetype)initWithDictionary:(GPBStringEnumDictionary *)dictionary;

 /**
  * Initializes a dictionary with the given capacity.
  *
  * @param func     The enum validation function for the dictionary.
  * @param numItems Capacity needed for the dictionary.
  *
  * @return A newly initialized dictionary with the given capacity.
  **/
 - (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
                                   capacity:(NSUInteger)numItems;

 // These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 // is not a valid enumerator as defined by validationFunc. If the actual value is
 // desired, use "raw" version of the method.

 /**
  * Gets the value for the given key.
  *
  * @param value Pointer into which the value will be set, if found.
  * @param key   Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getEnum:(nullable int32_t *)value forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @param block The block to enumerate with.
  *   **key**:        The key for the current entry.
  *   **value**:      The value for the current entry
  *   **stop**:       A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndEnumsUsingBlock:
     (void (^)(NSString *key, int32_t value, BOOL *stop))block;

 /**
  * Gets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue Pointer into which the value will be set, if found.
  * @param key      Key under which the value is stored, if present.
  *
  * @return YES if the key was found and the value was copied, NO otherwise.
  **/
 - (BOOL)getRawValue:(nullable int32_t *)rawValue forKey:(NSString *)key;

 /**
  * Enumerates the keys and values on this dictionary with the given block.
  *
  * @note This method bypass the validationFunc to enable the access of values that
  *       were not known at the time the binary was compiled.
  *
  * @param block The block to enumerate with.
  *   **key**:      The key for the current entry.
  *   **rawValue**: The value for the current entry
  *   **stop**:     A pointer to a boolean that when set stops the enumeration.
  **/
 - (void)enumerateKeysAndRawValuesUsingBlock:
     (void (^)(NSString *key, int32_t rawValue, BOOL *stop))block;

 /**
  * Adds the keys and raw enum values from another dictionary.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param otherDictionary Dictionary containing entries to be added to this
  *                        dictionary.
  **/
 - (void)addRawEntriesFromDictionary:(GPBStringEnumDictionary *)otherDictionary;

 // If value is not a valid enumerator as defined by validationFunc, these
 // methods will assert in debug, and will log in release and assign the value
 // to the default value. Use the rawValue methods below to assign non enumerator
 // values.

 /**
  * Sets the value for the given key.
  *
  * @param value     The value to set.
  * @param key       The key under which to store the value.
  **/
 - (void)setEnum:(int32_t)value forKey:(NSString *)key;

 /**
  * Sets the raw enum value for the given key.
  *
  * @note This method bypass the validationFunc to enable the setting of values that
  *       were not known at the time the binary was compiled.
  *
  * @param rawValue The raw enum value to set.
  * @param key      The key under which to store the raw enum value.
  **/
 - (void)setRawValue:(int32_t)rawValue forKey:(NSString *)key;

 /**
  * Removes the entry for the given key.
  *
  * @param aKey Key to be removed from this dictionary.
  **/
 - (void)removeEnumForKey:(NSString *)aKey;

 /**
  * Removes all entries in this dictionary.
  **/
 - (void)removeAll;

 @end

 //%PDDM-EXPAND-END DECLARE_DICTIONARIES()

 NS_ASSUME_NONNULL_END

 //%PDDM-DEFINE DECLARE_DICTIONARIES()
 //%DICTIONARY_INTERFACES_FOR_POD_KEY(UInt32, uint32_t)
 //%DICTIONARY_INTERFACES_FOR_POD_KEY(Int32, int32_t)
 //%DICTIONARY_INTERFACES_FOR_POD_KEY(UInt64, uint64_t)
 //%DICTIONARY_INTERFACES_FOR_POD_KEY(Int64, int64_t)
 //%DICTIONARY_INTERFACES_FOR_POD_KEY(Bool, BOOL)
 //%DICTIONARY_POD_INTERFACES_FOR_KEY(String, NSString, *, OBJECT)
 //%PDDM-DEFINE DICTIONARY_INTERFACES_FOR_POD_KEY(KEY_NAME, KEY_TYPE)
 //%DICTIONARY_POD_INTERFACES_FOR_KEY(KEY_NAME, KEY_TYPE, , POD)
 //%DICTIONARY_POD_KEY_TO_OBJECT_INTERFACE(KEY_NAME, KEY_TYPE, Object, ObjectType)
 //%PDDM-DEFINE DICTIONARY_POD_INTERFACES_FOR_KEY(KEY_NAME, KEY_TYPE, KisP, KHELPER)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, UInt32, uint32_t)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Int32, int32_t)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, UInt64, uint64_t)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Int64, int64_t)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Bool, BOOL)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Float, float)
 //%DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Double, double)
 //%DICTIONARY_KEY_TO_ENUM_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, Enum, int32_t)
 //%PDDM-DEFINE DICTIONARY_KEY_TO_POD_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE)
 //%DICTIONARY_COMMON_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE, POD, VALUE_NAME, value)
 //%PDDM-DEFINE DICTIONARY_POD_KEY_TO_OBJECT_INTERFACE(KEY_NAME, KEY_TYPE, VALUE_NAME, VALUE_TYPE)
 //%DICTIONARY_COMMON_INTERFACE(KEY_NAME, KEY_TYPE, , POD, VALUE_NAME, VALUE_TYPE, OBJECT, Object, object)
 //%PDDM-DEFINE VALUE_FOR_KEY_POD(KEY_TYPE, VALUE_TYPE, VNAME)
 //%/**
 //% * Gets the value for the given key.
 //% *
 //% * @param value Pointer into which the value will be set, if found.
 //% * @param key   Key under which the value is stored, if present.
 //% *
 //% * @return YES if the key was found and the value was copied, NO otherwise.
 //% **/
 //%- (BOOL)get##VNAME##:(nullable VALUE_TYPE *)value forKey:(KEY_TYPE)key;
 //%PDDM-DEFINE VALUE_FOR_KEY_OBJECT(KEY_TYPE, VALUE_TYPE, VNAME)
 //%/**
 //% * Fetches the object stored under the given key.
 //% *
 //% * @param key Key under which the value is stored, if present.
 //% *
 //% * @return The object if found, nil otherwise.
 //% **/
 //%- (VALUE_TYPE)objectForKey:(KEY_TYPE)key;
 //%PDDM-DEFINE VALUE_FOR_KEY_Enum(KEY_TYPE, VALUE_TYPE, VNAME)
 //%VALUE_FOR_KEY_POD(KEY_TYPE, VALUE_TYPE, VNAME)
 //%PDDM-DEFINE ARRAY_ARG_MODIFIERPOD()
 // Nothing
 //%PDDM-DEFINE ARRAY_ARG_MODIFIEREnum()
 // Nothing
 //%PDDM-DEFINE ARRAY_ARG_MODIFIEROBJECT()
 //%__nonnull GPB_UNSAFE_UNRETAINED ##
 //%PDDM-DEFINE DICTIONARY_CLASS_DECLPOD(KEY_NAME, VALUE_NAME, VALUE_TYPE)
 //%GPB##KEY_NAME##VALUE_NAME##Dictionary
 //%PDDM-DEFINE DICTIONARY_CLASS_DECLEnum(KEY_NAME, VALUE_NAME, VALUE_TYPE)
 //%GPB##KEY_NAME##VALUE_NAME##Dictionary
 //%PDDM-DEFINE DICTIONARY_CLASS_DECLOBJECT(KEY_NAME, VALUE_NAME, VALUE_TYPE)
 //%GPB##KEY_NAME##VALUE_NAME##Dictionary<__covariant VALUE_TYPE>
 //%PDDM-DEFINE DICTIONARY_COMMON_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE, VHELPER, VNAME, VNAME_VAR)
 //%#pragma mark - KEY_NAME -> VALUE_NAME
 //%
 //%/**
 //% * Class used for map fields of <##KEY_TYPE##, ##VALUE_TYPE##>
 //% * values. This performs better than boxing into NSNumbers in NSDictionaries.
 //% *
 //% * @note This class is not meant to be subclassed.
 //% **/
 //%@interface DICTIONARY_CLASS_DECL##VHELPER(KEY_NAME, VALUE_NAME, VALUE_TYPE) : NSObject <NSCopying>
 //%
 //%/** Number of entries stored in this dictionary. */
 //%@property(nonatomic, readonly) NSUInteger count;
 //%
 //%/**
 //% * Initializes this dictionary, copying the given values and keys.
 //% *
 //% * @param ##VNAME_VAR##s      The values to be placed in this dictionary.
 //% * @param keys ##VNAME_VAR$S##  The keys under which to store the values.
 //% * @param count ##VNAME_VAR$S## The number of elements to copy into the dictionary.
 //% *
 //% * @return A newly initialized dictionary with a copy of the values and keys.
 //% **/
 //%- (instancetype)initWith##VNAME##s:(const VALUE_TYPE ARRAY_ARG_MODIFIER##VHELPER()[__nullable])##VNAME_VAR##s
 //%                ##VNAME$S##  forKeys:(const KEY_TYPE##KisP$S##KisP ARRAY_ARG_MODIFIER##KHELPER()[__nullable])keys
 //%                ##VNAME$S##    count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;
 //%
 //%/**
 //% * Initializes this dictionary, copying the entries from the given dictionary.
 //% *
 //% * @param dictionary Dictionary containing the entries to add to this dictionary.
 //% *
 //% * @return A newly initialized dictionary with the entries of the given dictionary.
 //% **/
 //%- (instancetype)initWithDictionary:(GPB##KEY_NAME##VALUE_NAME##Dictionary *)dictionary;
 //%
 //%/**
 //% * Initializes this dictionary with the requested capacity.
 //% *
 //% * @param numItems Number of items needed for this dictionary.
 //% *
 //% * @return A newly initialized dictionary with the requested capacity.
 //% **/
 //%- (instancetype)initWithCapacity:(NSUInteger)numItems;
 //%
 //%DICTIONARY_IMMUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, VNAME, VNAME_VAR)
 //%
 //%/**
 //% * Adds the keys and values from another dictionary.
 //% *
 //% * @param otherDictionary Dictionary containing entries to be added to this
 //% *                        dictionary.
 //% **/
 //%- (void)addEntriesFromDictionary:(GPB##KEY_NAME##VALUE_NAME##Dictionary *)otherDictionary;
 //%
 //%DICTIONARY_MUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, VNAME, VNAME_VAR)
 //%
 //%@end
 //%

 //%PDDM-DEFINE DICTIONARY_KEY_TO_ENUM_INTERFACE(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE)
 //%DICTIONARY_KEY_TO_ENUM_INTERFACE2(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE, Enum)
 //%PDDM-DEFINE DICTIONARY_KEY_TO_ENUM_INTERFACE2(KEY_NAME, KEY_TYPE, KisP, KHELPER, VALUE_NAME, VALUE_TYPE, VHELPER)
 //%#pragma mark - KEY_NAME -> VALUE_NAME
 //%
 //%/**
 //% * Class used for map fields of <##KEY_TYPE##, ##VALUE_TYPE##>
 //% * values. This performs better than boxing into NSNumbers in NSDictionaries.
 //% *
 //% * @note This class is not meant to be subclassed.
 //% **/
 //%@interface GPB##KEY_NAME##VALUE_NAME##Dictionary : NSObject <NSCopying>
 //%
 //%/** Number of entries stored in this dictionary. */
 //%@property(nonatomic, readonly) NSUInteger count;
 //%/** The validation function to check if the enums are valid. */
 //%@property(nonatomic, readonly) GPBEnumValidationFunc validationFunc;
 //%
 //%/**
 //% * Initializes a dictionary with the given validation function.
 //% *
 //% * @param func The enum validation function for the dictionary.
 //% *
 //% * @return A newly initialized dictionary.
 //% **/
 //%- (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func;
 //%
 //%/**
 //% * Initializes a dictionary with the entries given.
 //% *
 //% * @param func   The enum validation function for the dictionary.
 //% * @param values The raw enum values values to be placed in the dictionary.
 //% * @param keys   The keys under which to store the values.
 //% * @param count  The number of entries to store in the dictionary.
 //% *
 //% * @return A newly initialized dictionary with the keys and values in it.
 //% **/
 //%- (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
 //%                                 rawValues:(const VALUE_TYPE ARRAY_ARG_MODIFIER##VHELPER()[__nullable])values
 //%                                   forKeys:(const KEY_TYPE##KisP$S##KisP ARRAY_ARG_MODIFIER##KHELPER()[__nullable])keys
 //%                                     count:(NSUInteger)count NS_DESIGNATED_INITIALIZER;
 //%
 //%/**
 //% * Initializes a dictionary with the entries from the given.
 //% * dictionary.
 //% *
 //% * @param dictionary Dictionary containing the entries to add to the dictionary.
 //% *
 //% * @return A newly initialized dictionary with the entries from the given
 //% *         dictionary in it.
 //% **/
 //%- (instancetype)initWithDictionary:(GPB##KEY_NAME##VALUE_NAME##Dictionary *)dictionary;
 //%
 //%/**
 //% * Initializes a dictionary with the given capacity.
 //% *
 //% * @param func     The enum validation function for the dictionary.
 //% * @param numItems Capacity needed for the dictionary.
 //% *
 //% * @return A newly initialized dictionary with the given capacity.
 //% **/
 //%- (instancetype)initWithValidationFunction:(nullable GPBEnumValidationFunc)func
 //%                                  capacity:(NSUInteger)numItems;
 //%
 //%// These will return kGPBUnrecognizedEnumeratorValue if the value for the key
 //%// is not a valid enumerator as defined by validationFunc. If the actual value is
 //%// desired, use "raw" version of the method.
 //%
 //%DICTIONARY_IMMUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, Enum, value)
 //%
 //%/**
 //% * Gets the raw enum value for the given key.
 //% *
 //% * @note This method bypass the validationFunc to enable the access of values that
 //% *       were not known at the time the binary was compiled.
 //% *
 //% * @param rawValue Pointer into which the value will be set, if found.
 //% * @param key      Key under which the value is stored, if present.
 //% *
 //% * @return YES if the key was found and the value was copied, NO otherwise.
 //% **/
 //%- (BOOL)getRawValue:(nullable VALUE_TYPE *)rawValue forKey:(KEY_TYPE##KisP$S##KisP)key;
 //%
 //%/**
 //% * Enumerates the keys and values on this dictionary with the given block.
 //% *
 //% * @note This method bypass the validationFunc to enable the access of values that
 //% *       were not known at the time the binary was compiled.
 //% *
 //% * @param block The block to enumerate with.
 //% *   **key**:      The key for the current entry.
 //% *   **rawValue**: The value for the current entry
 //% *   **stop**:     A pointer to a boolean that when set stops the enumeration.
 //% **/
 //%- (void)enumerateKeysAndRawValuesUsingBlock:
 //%    (void (^)(KEY_TYPE KisP##key, VALUE_TYPE rawValue, BOOL *stop))block;
 //%
 //%/**
 //% * Adds the keys and raw enum values from another dictionary.
 //% *
 //% * @note This method bypass the validationFunc to enable the setting of values that
 //% *       were not known at the time the binary was compiled.
 //% *
 //% * @param otherDictionary Dictionary containing entries to be added to this
 //% *                        dictionary.
 //% **/
 //%- (void)addRawEntriesFromDictionary:(GPB##KEY_NAME##VALUE_NAME##Dictionary *)otherDictionary;
 //%
 //%// If value is not a valid enumerator as defined by validationFunc, these
 //%// methods will assert in debug, and will log in release and assign the value
 //%// to the default value. Use the rawValue methods below to assign non enumerator
 //%// values.
 //%
 //%DICTIONARY_MUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, Enum, value)
 //%
 //%@end
 //%

 //%PDDM-DEFINE DICTIONARY_IMMUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, VNAME, VNAME_VAR)
 //%VALUE_FOR_KEY_##VHELPER(KEY_TYPE##KisP$S##KisP, VALUE_TYPE, VNAME)
 //%
 //%/**
 //% * Enumerates the keys and values on this dictionary with the given block.
 //% *
 //% * @param block The block to enumerate with.
 //% *   **key**: ##VNAME_VAR$S##  The key for the current entry.
 //% *   **VNAME_VAR**:      The value for the current entry
 //% *   **stop**: ##VNAME_VAR$S## A pointer to a boolean that when set stops the enumeration.
 //% **/
 //%- (void)enumerateKeysAnd##VNAME##sUsingBlock:
 //%    (void (^)(KEY_TYPE KisP##key, VALUE_TYPE VNAME_VAR, BOOL *stop))block;

 //%PDDM-DEFINE DICTIONARY_MUTABLE_INTERFACE(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE, VHELPER, VNAME, VNAME_VAR)
 //%/**
 //% * Sets the value for the given key.
 //% *
 //% * @param ##VNAME_VAR     The value to set.
 //% * @param key ##VNAME_VAR$S## The key under which to store the value.
 //% **/
 //%- (void)set##VNAME##:(VALUE_TYPE)##VNAME_VAR forKey:(KEY_TYPE##KisP$S##KisP)key;
 //%DICTIONARY_EXTRA_MUTABLE_METHODS_##VHELPER(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE)
 //%/**
 //% * Removes the entry for the given key.
 //% *
 //% * @param aKey Key to be removed from this dictionary.
 //% **/
 //%- (void)remove##VNAME##ForKey:(KEY_TYPE##KisP$S##KisP)aKey;
 //%
 //%/**
 //% * Removes all entries in this dictionary.
 //% **/
 //%- (void)removeAll;

 //%PDDM-DEFINE DICTIONARY_EXTRA_MUTABLE_METHODS_POD(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE)
 // Empty
 //%PDDM-DEFINE DICTIONARY_EXTRA_MUTABLE_METHODS_OBJECT(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE)
 // Empty
 //%PDDM-DEFINE DICTIONARY_EXTRA_MUTABLE_METHODS_Enum(KEY_NAME, KEY_TYPE, KisP, VALUE_NAME, VALUE_TYPE)
 //%
 //%/**
 //% * Sets the raw enum value for the given key.
 //% *
 //% * @note This method bypass the validationFunc to enable the setting of values that
 //% *       were not known at the time the binary was compiled.
 //% *
 //% * @param rawValue The raw enum value to set.
 //% * @param key      The key under which to store the raw enum value.
 //% **/
 //%- (void)setRawValue:(VALUE_TYPE)rawValue forKey:(KEY_TYPE##KisP$S##KisP)key;
 //%