blob: 3c2bb9cc56c0b139336f2a6d009a528d1df823da [file] [log] [blame]
#!/bin/bash -x
# Copyright 2016 The Bazel Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Wrapper script for collecting code coverage during test execution.
#
# Expected environment:
# COVERAGE_MANIFEST - mandatory, location of the instrumented file manifest
# LCOV_MERGER - mandatory, location of the LcovMerger
# COVERAGE_DIR - optional, location of the coverage temp directory
# COVERAGE_OUTPUT_FILE - optional, location of the final lcov file
#
# Script expects that it will be started in the execution root directory and
# not in the test's runfiles directory.
if [[ -z "$COVERAGE_MANIFEST" ]]; then
echo --
echo Coverage runner: \$COVERAGE_MANIFEST is not set
echo Current environment:
env | sort
exit 1
fi
# When collect_coverage.sh is used, test runner must be instructed not to cd
# to the test's runfiles directory.
export ROOT="$PWD"
if [[ "$COVERAGE_MANIFEST" != /* ]]; then
# Canonicalize the path to coverage manifest so that tests can find it.
export COVERAGE_MANIFEST="$ROOT/$COVERAGE_MANIFEST"
fi
# write coverage data outside of the runfiles tree
export COVERAGE_DIR=${COVERAGE_DIR:-"$ROOT/coverage"}
# make COVERAGE_DIR an absolute path
if ! [[ $COVERAGE_DIR == $ROOT* ]]; then
COVERAGE_DIR=$ROOT/$COVERAGE_DIR
fi
mkdir -p "$COVERAGE_DIR"
COVERAGE_OUTPUT_FILE=${COVERAGE_OUTPUT_FILE:-"$COVERAGE_DIR/_coverage.dat"}
# make COVERAGE_OUTPUT_FILE an absolute path
if ! [[ $COVERAGE_OUTPUT_FILE == $ROOT* ]]; then
COVERAGE_OUTPUT_FILE=$ROOT/$COVERAGE_OUTPUT_FILE
fi
# Java
# --------------------------------------
export JAVA_COVERAGE_FILE=$COVERAGE_DIR/jvcov.dat
# Let tests know that it is a coverage run
export COVERAGE=1
export BULK_COVERAGE_RUN=1
for name in "$LCOV_MERGER"; do
if [[ ! -e $name ]]; then
echo --
echo Coverage runner: cannot locate file $name
exit 1
fi
done
# Setting up the environment for executing the C++ tests.
if [[ -z "$GCOV_PREFIX_STRIP" ]]; then
# TODO: GCOV_PREFIX_STRIP=3 is incorrect on MacOS in the default setup
export GCOV_PREFIX_STRIP=3
fi
export GCOV_PREFIX="${COVERAGE_DIR}"
export LLVM_PROFILE_FILE="${COVERAGE_DIR}/%h-%p-%m.profraw"
# In coverage mode for Java, we need to merge the runtime classpath before
# running the tests. JacocoCoverageRunner uses this merged jar in order
# to get coverage data.
#
# Merge the classpath using SingleJar and save it in the environment
# variable JACOCO_METADATA_JAR. The jars on the runtime classpath are listed
# in the file $JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE.
#
# We need to merge the jars here because the merged jar can be an input
# too large (the combined merged jars for several big tests in a run
# can go over 10G). Not merging the jars and making
# JacocoCoverageRunner read every individual jar goes over the shutdown hook
# time limit in the coverage runner (~few seconds).
#
# SINGLE_JAR_TOOL Exec path of SingleJar.
#
# JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE Exec path of a file that contains the
# relative paths of the jars on the runtime
# classpath delimited by newline.
if [[ ! -z "${JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE}" ]]; then
JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE="${PWD}/${JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE}"
SINGLE_JAR_TOOL="${PWD}/${SINGLE_JAR_TOOL}"
# Create a paramsfile for invoking SingleJar.
mkdir -p "${COVERAGE_DIR}"
single_jar_params_file="${COVERAGE_DIR}/runtime_classpath.paramsfile"
touch "$single_jar_params_file"
# Export JACOCO_METADATA_JAR in order for JacocoCoverageRunner to be able
# to read it.
export JACOCO_METADATA_JAR="${COVERAGE_DIR}/coverage-runtime_merged_instr.jar"
echo -e "--output ${JACOCO_METADATA_JAR}\n--sources" >> "$single_jar_params_file"
# Append the runfiles prefix to all the relative paths found in
# JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE, to invoke SingleJar with the
# absolute paths.
RUNFILES_PREFIX="$TEST_SRCDIR/$TEST_WORKSPACE/"
cat "$JAVA_RUNTIME_CLASSPATH_FOR_COVERAGE" | sed "s@^@$RUNFILES_PREFIX@" >> "$single_jar_params_file"
# Invoke SingleJar. This will create JACOCO_METADATA_JAR.
"${SINGLE_JAR_TOOL}" "@$single_jar_params_file"
fi
# TODO(bazel-team): cd should be avoided.
cd "$TEST_SRCDIR/$TEST_WORKSPACE"
# Execute the test.
"$@"
TEST_STATUS=$?
# Always create the coverage report.
touch $COVERAGE_OUTPUT_FILE
if [[ $TEST_STATUS -ne 0 ]]; then
echo --
echo Coverage runner: Not collecting coverage for failed test.
echo The following commands failed with status $TEST_STATUS
echo "$@"
exit $TEST_STATUS
fi
# TODO(bazel-team): cd should be avoided.
cd $ROOT
# Call the C++ code coverage collection script.
if [[ "$CC_CODE_COVERAGE_SCRIPT" ]]; then
eval "${CC_CODE_COVERAGE_SCRIPT}"
fi
# Export the command line that invokes LcovMerger with the flags:
# --coverage_dir The absolute path of the directory where the
# intermediate coverage reports are located.
# CoverageOutputGenerator will search for files with
# the .dat and .gcov extension under this directory and
# will merge everything it found in the output report.
#
# --output_file The absolute path of the merged coverage report.
#
# --filter_sources Filters out the sources that match the given regexes
# from the final coverage report. This is needed
# because some coverage tools (e.g. gcov) do not have
# any way of specifying what sources to exclude when
# generating the code coverage report (in this case the
# syslib sources).
#
# --source_file_manifest The absolute path of the coverage source file
# manifest. CoverageOutputGenerator uses this file to
# keep only the C++ sources found in the manifest.
# For other languages the sources in the manifest are
# ignored.
LCOV_MERGER_CMD="${LCOV_MERGER} --coverage_dir=${COVERAGE_DIR} \
--output_file=${COVERAGE_OUTPUT_FILE} \
--filter_sources=/usr/bin/.+ \
--filter_sources=/usr/lib/.+ \
--filter_sources=/usr/include.+ \
--filter_sources=.*external/.+ \
--source_file_manifest=${COVERAGE_MANIFEST}"
if [[ $COVERAGE_REPORTED_TO_ACTUAL_SOURCES_FILE ]]; then
LCOV_MERGER_CMD="$LCOV_MERGER_CMD\
--sources_to_replace_file=$ROOT/$COVERAGE_REPORTED_TO_ACTUAL_SOURCES_FILE"
fi
if [[ $DISPLAY_LCOV_CMD ]] ; then
echo "Running lcov_merger"
echo $LCOV_MERGER_CMD
echo "-----------------"
fi
# JAVA_RUNFILES is set to the runfiles of the test, which does not necessarily
# contain a JVM (it does only if the test has a Java binary somewhere). So let
# the LCOV merger discover where its own runfiles tree is.
JAVA_RUNFILES= exec $LCOV_MERGER_CMD