| /* infcover.c -- test zlib's inflate routines with full code coverage | |
| * Copyright (C) 2011 Mark Adler | |
| * For conditions of distribution and use, see copyright notice in zlib.h | |
| */ | |
| /* to use, do: ./configure --cover && make cover */ | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <assert.h> | |
| #include "zlib.h" | |
| /* get definition of internal structure so we can mess with it (see pull()), | |
| and so we can call inflate_trees() (see cover5()) */ | |
| #define ZLIB_INTERNAL | |
| #include "inftrees.h" | |
| #include "inflate.h" | |
| #define local static | |
| /* -- memory tracking routines -- */ | |
| /* | |
| These memory tracking routines are provided to zlib and track all of zlib's | |
| allocations and deallocations, check for LIFO operations, keep a current | |
| and high water mark of total bytes requested, optionally set a limit on the | |
| total memory that can be allocated, and when done check for memory leaks. | |
| They are used as follows: | |
| z_stream strm; | |
| mem_setup(&strm) initializes the memory tracking and sets the | |
| zalloc, zfree, and opaque members of strm to use | |
| memory tracking for all zlib operations on strm | |
| mem_limit(&strm, limit) sets a limit on the total bytes requested -- a | |
| request that exceeds this limit will result in an | |
| allocation failure (returns NULL) -- setting the | |
| limit to zero means no limit, which is the default | |
| after mem_setup() | |
| mem_used(&strm, "msg") prints to stderr "msg" and the total bytes used | |
| mem_high(&strm, "msg") prints to stderr "msg" and the high water mark | |
| mem_done(&strm, "msg") ends memory tracking, releases all allocations | |
| for the tracking as well as leaked zlib blocks, if | |
| any. If there was anything unusual, such as leaked | |
| blocks, non-FIFO frees, or frees of addresses not | |
| allocated, then "msg" and information about the | |
| problem is printed to stderr. If everything is | |
| normal, nothing is printed. mem_done resets the | |
| strm members to Z_NULL to use the default memory | |
| allocation routines on the next zlib initialization | |
| using strm. | |
| */ | |
| /* these items are strung together in a linked list, one for each allocation */ | |
| struct mem_item { | |
| void *ptr; /* pointer to allocated memory */ | |
| size_t size; /* requested size of allocation */ | |
| struct mem_item *next; /* pointer to next item in list, or NULL */ | |
| }; | |
| /* this structure is at the root of the linked list, and tracks statistics */ | |
| struct mem_zone { | |
| struct mem_item *first; /* pointer to first item in list, or NULL */ | |
| size_t total, highwater; /* total allocations, and largest total */ | |
| size_t limit; /* memory allocation limit, or 0 if no limit */ | |
| int notlifo, rogue; /* counts of non-LIFO frees and rogue frees */ | |
| }; | |
| /* memory allocation routine to pass to zlib */ | |
| local void *mem_alloc(void *mem, unsigned count, unsigned size) | |
| { | |
| void *ptr; | |
| struct mem_item *item; | |
| struct mem_zone *zone = mem; | |
| size_t len = count * (size_t)size; | |
| /* induced allocation failure */ | |
| if (zone == NULL || (zone->limit && zone->total + len > zone->limit)) | |
| return NULL; | |
| /* perform allocation using the standard library, fill memory with a | |
| non-zero value to make sure that the code isn't depending on zeros */ | |
| ptr = malloc(len); | |
| if (ptr == NULL) | |
| return NULL; | |
| memset(ptr, 0xa5, len); | |
| /* create a new item for the list */ | |
| item = malloc(sizeof(struct mem_item)); | |
| if (item == NULL) { | |
| free(ptr); | |
| return NULL; | |
| } | |
| item->ptr = ptr; | |
| item->size = len; | |
| /* insert item at the beginning of the list */ | |
| item->next = zone->first; | |
| zone->first = item; | |
| /* update the statistics */ | |
| zone->total += item->size; | |
| if (zone->total > zone->highwater) | |
| zone->highwater = zone->total; | |
| /* return the allocated memory */ | |
| return ptr; | |
| } | |
| /* memory free routine to pass to zlib */ | |
| local void mem_free(void *mem, void *ptr) | |
| { | |
| struct mem_item *item, *next; | |
| struct mem_zone *zone = mem; | |
| /* if no zone, just do a free */ | |
| if (zone == NULL) { | |
| free(ptr); | |
| return; | |
| } | |
| /* point next to the item that matches ptr, or NULL if not found -- remove | |
| the item from the linked list if found */ | |
| next = zone->first; | |
| if (next) { | |
| if (next->ptr == ptr) | |
| zone->first = next->next; /* first one is it, remove from list */ | |
| else { | |
| do { /* search the linked list */ | |
| item = next; | |
| next = item->next; | |
| } while (next != NULL && next->ptr != ptr); | |
| if (next) { /* if found, remove from linked list */ | |
| item->next = next->next; | |
| zone->notlifo++; /* not a LIFO free */ | |
| } | |
| } | |
| } | |
| /* if found, update the statistics and free the item */ | |
| if (next) { | |
| zone->total -= next->size; | |
| free(next); | |
| } | |
| /* if not found, update the rogue count */ | |
| else | |
| zone->rogue++; | |
| /* in any case, do the requested free with the standard library function */ | |
| free(ptr); | |
| } | |
| /* set up a controlled memory allocation space for monitoring, set the stream | |
| parameters to the controlled routines, with opaque pointing to the space */ | |
| local void mem_setup(z_stream *strm) | |
| { | |
| struct mem_zone *zone; | |
| zone = malloc(sizeof(struct mem_zone)); | |
| assert(zone != NULL); | |
| zone->first = NULL; | |
| zone->total = 0; | |
| zone->highwater = 0; | |
| zone->limit = 0; | |
| zone->notlifo = 0; | |
| zone->rogue = 0; | |
| strm->opaque = zone; | |
| strm->zalloc = mem_alloc; | |
| strm->zfree = mem_free; | |
| } | |
| /* set a limit on the total memory allocation, or 0 to remove the limit */ | |
| local void mem_limit(z_stream *strm, size_t limit) | |
| { | |
| struct mem_zone *zone = strm->opaque; | |
| zone->limit = limit; | |
| } | |
| /* show the current total requested allocations in bytes */ | |
| local void mem_used(z_stream *strm, char *prefix) | |
| { | |
| struct mem_zone *zone = strm->opaque; | |
| fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total); | |
| } | |
| /* show the high water allocation in bytes */ | |
| local void mem_high(z_stream *strm, char *prefix) | |
| { | |
| struct mem_zone *zone = strm->opaque; | |
| fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater); | |
| } | |
| /* release the memory allocation zone -- if there are any surprises, notify */ | |
| local void mem_done(z_stream *strm, char *prefix) | |
| { | |
| int count = 0; | |
| struct mem_item *item, *next; | |
| struct mem_zone *zone = strm->opaque; | |
| /* show high water mark */ | |
| mem_high(strm, prefix); | |
| /* free leftover allocations and item structures, if any */ | |
| item = zone->first; | |
| while (item != NULL) { | |
| free(item->ptr); | |
| next = item->next; | |
| free(item); | |
| item = next; | |
| count++; | |
| } | |
| /* issue alerts about anything unexpected */ | |
| if (count || zone->total) | |
| fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n", | |
| prefix, zone->total, count); | |
| if (zone->notlifo) | |
| fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo); | |
| if (zone->rogue) | |
| fprintf(stderr, "** %s: %d frees not recognized\n", | |
| prefix, zone->rogue); | |
| /* free the zone and delete from the stream */ | |
| free(zone); | |
| strm->opaque = Z_NULL; | |
| strm->zalloc = Z_NULL; | |
| strm->zfree = Z_NULL; | |
| } | |
| /* -- inflate test routines -- */ | |
| /* Decode a hexadecimal string, set *len to length, in[] to the bytes. This | |
| decodes liberally, in that hex digits can be adjacent, in which case two in | |
| a row writes a byte. Or they can delimited by any non-hex character, where | |
| the delimiters are ignored except when a single hex digit is followed by a | |
| delimiter in which case that single digit writes a byte. The returned | |
| data is allocated and must eventually be freed. NULL is returned if out of | |
| memory. If the length is not needed, then len can be NULL. */ | |
| local unsigned char *h2b(const char *hex, unsigned *len) | |
| { | |
| unsigned char *in; | |
| unsigned next, val; | |
| in = malloc((strlen(hex) + 1) >> 1); | |
| if (in == NULL) | |
| return NULL; | |
| next = 0; | |
| val = 1; | |
| do { | |
| if (*hex >= '0' && *hex <= '9') | |
| val = (val << 4) + *hex - '0'; | |
| else if (*hex >= 'A' && *hex <= 'F') | |
| val = (val << 4) + *hex - 'A' + 10; | |
| else if (*hex >= 'a' && *hex <= 'f') | |
| val = (val << 4) + *hex - 'a' + 10; | |
| else if (val != 1 && val < 32) /* one digit followed by delimiter */ | |
| val += 240; /* make it look like two digits */ | |
| if (val > 255) { /* have two digits */ | |
| in[next++] = val & 0xff; /* save the decoded byte */ | |
| val = 1; /* start over */ | |
| } | |
| } while (*hex++); /* go through the loop with the terminating null */ | |
| if (len != NULL) | |
| *len = next; | |
| in = reallocf(in, next); | |
| return in; | |
| } | |
| /* generic inflate() run, where hex is the hexadecimal input data, what is the | |
| text to include in an error message, step is how much input data to feed | |
| inflate() on each call, or zero to feed it all, win is the window bits | |
| parameter to inflateInit2(), len is the size of the output buffer, and err | |
| is the error code expected from the first inflate() call (the second | |
| inflate() call is expected to return Z_STREAM_END). If win is 47, then | |
| header information is collected with inflateGetHeader(). If a zlib stream | |
| is looking for a dictionary, then an empty dictionary is provided. | |
| inflate() is run until all of the input data is consumed. */ | |
| local void inf(char *hex, char *what, unsigned step, int win, unsigned len, | |
| int err) | |
| { | |
| int ret; | |
| unsigned have; | |
| unsigned char *in, *out; | |
| z_stream strm, copy; | |
| gz_header head; | |
| mem_setup(&strm); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit2(&strm, win); | |
| if (ret != Z_OK) { | |
| mem_done(&strm, what); | |
| return; | |
| } | |
| out = malloc(len); assert(out != NULL); | |
| if (win == 47) { | |
| head.extra = out; | |
| head.extra_max = len; | |
| head.name = out; | |
| head.name_max = len; | |
| head.comment = out; | |
| head.comm_max = len; | |
| ret = inflateGetHeader(&strm, &head); assert(ret == Z_OK); | |
| } | |
| in = h2b(hex, &have); assert(in != NULL); | |
| if (step == 0 || step > have) | |
| step = have; | |
| strm.avail_in = step; | |
| have -= step; | |
| strm.next_in = in; | |
| do { | |
| strm.avail_out = len; | |
| strm.next_out = out; | |
| ret = inflate(&strm, Z_NO_FLUSH); assert(err == 9 || ret == err); | |
| if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT) | |
| break; | |
| if (ret == Z_NEED_DICT) { | |
| ret = inflateSetDictionary(&strm, in, 1); | |
| assert(ret == Z_DATA_ERROR); | |
| mem_limit(&strm, 1); | |
| ret = inflateSetDictionary(&strm, out, 0); | |
| assert(ret == Z_MEM_ERROR); | |
| mem_limit(&strm, 0); | |
| ((struct inflate_state *)strm.state)->mode = DICT; | |
| ret = inflateSetDictionary(&strm, out, 0); | |
| assert(ret == Z_OK); | |
| ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_BUF_ERROR); | |
| } | |
| ret = inflateCopy(©, &strm); assert(ret == Z_OK); | |
| ret = inflateEnd(©); assert(ret == Z_OK); | |
| err = 9; /* don't care next time around */ | |
| have += strm.avail_in; | |
| strm.avail_in = step > have ? have : step; | |
| have -= strm.avail_in; | |
| } while (strm.avail_in); | |
| free(in); | |
| free(out); | |
| ret = inflateReset2(&strm, -8); assert(ret == Z_OK); | |
| ret = inflateEnd(&strm); assert(ret == Z_OK); | |
| mem_done(&strm, what); | |
| } | |
| /* cover all of the lines in inflate.c up to inflate() */ | |
| local void cover_support(void) | |
| { | |
| int ret; | |
| z_stream strm; | |
| mem_setup(&strm); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit(&strm); assert(ret == Z_OK); | |
| mem_used(&strm, "inflate init"); | |
| ret = inflatePrime(&strm, 5, 31); assert(ret == Z_OK); | |
| ret = inflatePrime(&strm, -1, 0); assert(ret == Z_OK); | |
| ret = inflateSetDictionary(&strm, Z_NULL, 0); | |
| assert(ret == Z_STREAM_ERROR); | |
| ret = inflateEnd(&strm); assert(ret == Z_OK); | |
| mem_done(&strm, "prime"); | |
| inf("63 0", "force window allocation", 0, -15, 1, Z_OK); | |
| inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK); | |
| inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK); | |
| inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END); | |
| inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR); | |
| mem_setup(&strm); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream)); | |
| assert(ret == Z_VERSION_ERROR); | |
| mem_done(&strm, "wrong version"); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit(&strm); assert(ret == Z_OK); | |
| ret = inflateEnd(&strm); assert(ret == Z_OK); | |
| fputs("inflate built-in memory routines\n", stderr); | |
| } | |
| /* cover all inflate() header and trailer cases and code after inflate() */ | |
| local void cover_wrap(void) | |
| { | |
| int ret; | |
| z_stream strm, copy; | |
| unsigned char dict[257]; | |
| ret = inflate(Z_NULL, 0); assert(ret == Z_STREAM_ERROR); | |
| ret = inflateEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); | |
| ret = inflateCopy(Z_NULL, Z_NULL); assert(ret == Z_STREAM_ERROR); | |
| fputs("inflate bad parameters\n", stderr); | |
| inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR); | |
| inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR); | |
| inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR); | |
| inf("8 99", "set window size from header", 0, 0, 0, Z_OK); | |
| inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR); | |
| inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END); | |
| inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1, | |
| Z_DATA_ERROR); | |
| inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length", | |
| 0, 47, 0, Z_STREAM_END); | |
| inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR); | |
| inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT); | |
| inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK); | |
| mem_setup(&strm); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit2(&strm, -8); | |
| strm.avail_in = 2; | |
| strm.next_in = (void *)"\x63"; | |
| strm.avail_out = 1; | |
| strm.next_out = (void *)&ret; | |
| mem_limit(&strm, 1); | |
| ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); | |
| ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); | |
| mem_limit(&strm, 0); | |
| memset(dict, 0, 257); | |
| ret = inflateSetDictionary(&strm, dict, 257); | |
| assert(ret == Z_OK); | |
| mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256); | |
| ret = inflatePrime(&strm, 16, 0); assert(ret == Z_OK); | |
| strm.avail_in = 2; | |
| strm.next_in = (void *)"\x80"; | |
| ret = inflateSync(&strm); assert(ret == Z_DATA_ERROR); | |
| ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_STREAM_ERROR); | |
| strm.avail_in = 4; | |
| strm.next_in = (void *)"\0\0\xff\xff"; | |
| ret = inflateSync(&strm); assert(ret == Z_OK); | |
| (void)inflateSyncPoint(&strm); | |
| ret = inflateCopy(©, &strm); assert(ret == Z_MEM_ERROR); | |
| mem_limit(&strm, 0); | |
| ret = inflateUndermine(&strm, 1); assert(ret == Z_DATA_ERROR); | |
| (void)inflateMark(&strm); | |
| ret = inflateEnd(&strm); assert(ret == Z_OK); | |
| mem_done(&strm, "miscellaneous, force memory errors"); | |
| } | |
| /* input and output functions for inflateBack() */ | |
| local unsigned pull(void *desc, unsigned char **buf) | |
| { | |
| static unsigned int next = 0; | |
| static unsigned char dat[] = {0x63, 0, 2, 0}; | |
| struct inflate_state *state; | |
| if (desc == Z_NULL) { | |
| next = 0; | |
| return 0; /* no input (already provided at next_in) */ | |
| } | |
| state = (void *)((z_stream *)desc)->state; | |
| if (state != Z_NULL) | |
| state->mode = SYNC; /* force an otherwise impossible situation */ | |
| return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0; | |
| } | |
| local int push(void *desc, unsigned char *buf, unsigned len) | |
| { | |
| buf += len; | |
| return desc != Z_NULL; /* force error if desc not null */ | |
| } | |
| /* cover inflateBack() up to common deflate data cases and after those */ | |
| local void cover_back(void) | |
| { | |
| int ret; | |
| z_stream strm; | |
| unsigned char win[32768]; | |
| ret = inflateBackInit_(Z_NULL, 0, win, 0, 0); | |
| assert(ret == Z_VERSION_ERROR); | |
| ret = inflateBackInit(Z_NULL, 0, win); assert(ret == Z_STREAM_ERROR); | |
| ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL); | |
| assert(ret == Z_STREAM_ERROR); | |
| ret = inflateBackEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); | |
| fputs("inflateBack bad parameters\n", stderr); | |
| mem_setup(&strm); | |
| ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); | |
| strm.avail_in = 2; | |
| strm.next_in = (void *)"\x03"; | |
| ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); | |
| assert(ret == Z_STREAM_END); | |
| /* force output error */ | |
| strm.avail_in = 3; | |
| strm.next_in = (void *)"\x63\x00"; | |
| ret = inflateBack(&strm, pull, Z_NULL, push, &strm); | |
| assert(ret == Z_BUF_ERROR); | |
| /* force mode error by mucking with state */ | |
| ret = inflateBack(&strm, pull, &strm, push, Z_NULL); | |
| assert(ret == Z_STREAM_ERROR); | |
| ret = inflateBackEnd(&strm); assert(ret == Z_OK); | |
| mem_done(&strm, "inflateBack bad state"); | |
| ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); | |
| ret = inflateBackEnd(&strm); assert(ret == Z_OK); | |
| fputs("inflateBack built-in memory routines\n", stderr); | |
| } | |
| /* do a raw inflate of data in hexadecimal with both inflate and inflateBack */ | |
| local int try(char *hex, char *id, int err) | |
| { | |
| int ret; | |
| unsigned len, size; | |
| unsigned char *in, *out, *win; | |
| char *prefix; | |
| z_stream strm; | |
| /* convert to hex */ | |
| in = h2b(hex, &len); | |
| assert(in != NULL); | |
| /* allocate work areas */ | |
| size = len << 3; | |
| out = malloc(size); | |
| assert(out != NULL); | |
| win = malloc(32768); | |
| assert(win != NULL); | |
| prefix = malloc(strlen(id) + 6); | |
| assert(prefix != NULL); | |
| /* first with inflate */ | |
| strcpy(prefix, id); | |
| strcat(prefix, "-late"); | |
| mem_setup(&strm); | |
| strm.avail_in = 0; | |
| strm.next_in = Z_NULL; | |
| ret = inflateInit2(&strm, err < 0 ? 47 : -15); | |
| assert(ret == Z_OK); | |
| strm.avail_in = len; | |
| strm.next_in = in; | |
| do { | |
| strm.avail_out = size; | |
| strm.next_out = out; | |
| ret = inflate(&strm, Z_TREES); | |
| assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR); | |
| if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT) | |
| break; | |
| } while (strm.avail_in || strm.avail_out == 0); | |
| if (err) { | |
| assert(ret == Z_DATA_ERROR); | |
| assert(strcmp(id, strm.msg) == 0); | |
| } | |
| inflateEnd(&strm); | |
| mem_done(&strm, prefix); | |
| /* then with inflateBack */ | |
| if (err >= 0) { | |
| strcpy(prefix, id); | |
| strcat(prefix, "-back"); | |
| mem_setup(&strm); | |
| ret = inflateBackInit(&strm, 15, win); | |
| assert(ret == Z_OK); | |
| strm.avail_in = len; | |
| strm.next_in = in; | |
| ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); | |
| assert(ret != Z_STREAM_ERROR); | |
| if (err) { | |
| assert(ret == Z_DATA_ERROR); | |
| assert(strcmp(id, strm.msg) == 0); | |
| } | |
| inflateBackEnd(&strm); | |
| mem_done(&strm, prefix); | |
| } | |
| /* clean up */ | |
| free(prefix); | |
| free(win); | |
| free(out); | |
| free(in); | |
| return ret; | |
| } | |
| /* cover deflate data cases in both inflate() and inflateBack() */ | |
| local void cover_inflate(void) | |
| { | |
| try("0 0 0 0 0", "invalid stored block lengths", 1); | |
| try("3 0", "fixed", 0); | |
| try("6", "invalid block type", 1); | |
| try("1 1 0 fe ff 0", "stored", 0); | |
| try("fc 0 0", "too many length or distance symbols", 1); | |
| try("4 0 fe ff", "invalid code lengths set", 1); | |
| try("4 0 24 49 0", "invalid bit length repeat", 1); | |
| try("4 0 24 e9 ff ff", "invalid bit length repeat", 1); | |
| try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1); | |
| try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0", | |
| "invalid literal/lengths set", 1); | |
| try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1); | |
| try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1); | |
| try("2 7e ff ff", "invalid distance code", 1); | |
| try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1); | |
| /* also trailer mismatch just in inflate() */ | |
| try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1); | |
| try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1", | |
| "incorrect length check", -1); | |
| try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0); | |
| try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f", | |
| "long code", 0); | |
| try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0); | |
| try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c", | |
| "long distance and extra", 0); | |
| try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 " | |
| "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0); | |
| inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258, | |
| Z_STREAM_END); | |
| inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK); | |
| } | |
| /* cover remaining lines in inftrees.c */ | |
| local void cover_trees(void) | |
| { | |
| int ret; | |
| unsigned bits; | |
| unsigned short lens[16], work[16]; | |
| code *next, table[ENOUGH_DISTS]; | |
| /* we need to call inflate_table() directly in order to manifest not- | |
| enough errors, since zlib insures that enough is always enough */ | |
| for (bits = 0; bits < 15; bits++) | |
| lens[bits] = (unsigned short)(bits + 1); | |
| lens[15] = 15; | |
| next = table; | |
| bits = 15; | |
| ret = inflate_table(DISTS, lens, 16, &next, &bits, work); | |
| assert(ret == 1); | |
| next = table; | |
| bits = 1; | |
| ret = inflate_table(DISTS, lens, 16, &next, &bits, work); | |
| assert(ret == 1); | |
| fputs("inflate_table not enough errors\n", stderr); | |
| } | |
| /* cover remaining inffast.c decoding and window copying */ | |
| local void cover_fast(void) | |
| { | |
| inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68" | |
| " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR); | |
| inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49" | |
| " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258, | |
| Z_DATA_ERROR); | |
| inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258, | |
| Z_DATA_ERROR); | |
| inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258, | |
| Z_DATA_ERROR); | |
| inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0", | |
| "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR); | |
| inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK); | |
| inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0", | |
| "contiguous and wrap around window", 6, -8, 259, Z_OK); | |
| inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259, | |
| Z_STREAM_END); | |
| } | |
| int main(void) | |
| { | |
| fprintf(stderr, "%s\n", zlibVersion()); | |
| cover_support(); | |
| cover_wrap(); | |
| cover_back(); | |
| cover_inflate(); | |
| cover_trees(); | |
| cover_fast(); | |
| return 0; | |
| } |