| // Copyright 2016 The Bazel Authors. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "src/tools/singlejar/input_jar.h" |
| |
| bool InputJar::Open(const std::string &path) { |
| if (!path_.empty()) { |
| diag_errx(1, "%s:%d: This instance is already handling %s\n", __FILE__, |
| __LINE__, path_.c_str()); |
| } |
| if (!mapped_file_.Open(path)) { |
| diag_warn("%s:%d: Cannot open input jar %s", __FILE__, __LINE__, |
| path.c_str()); |
| mapped_file_.Close(); |
| return false; |
| } |
| if (mapped_file_.size() < sizeof(ECD)) { |
| diag_warnx( |
| "%s:%d: %s is only 0x%zx" |
| " bytes long, should be at least 0x%zx bytes long", |
| __FILE__, __LINE__, path.c_str(), mapped_file_.size(), sizeof(ECD)); |
| mapped_file_.Close(); |
| return false; |
| } |
| |
| // Now locate End of Central Directory (ECD) record. |
| auto ecd_min = mapped_file_.end() - 65536 - sizeof(ECD); |
| if (ecd_min < mapped_file_.start()) { |
| ecd_min = mapped_file_.start(); |
| } |
| |
| const ECD *ecd = nullptr; |
| for (auto ecd_ptr = mapped_file_.end() - sizeof(ECD); ecd_ptr >= ecd_min; |
| --ecd_ptr) { |
| if (reinterpret_cast<const ECD *>(ecd_ptr)->is()) { |
| ecd = reinterpret_cast<const ECD *>(ecd_ptr); |
| break; |
| } |
| } |
| if (ecd == nullptr) { |
| diag_warnx("%s:%d: Cannot locate ECD record in %s", __FILE__, __LINE__, |
| path.c_str()); |
| mapped_file_.Close(); |
| return false; |
| } |
| |
| /* Find Central Directory and preamble size. We want to handle the case |
| * where a Jar/Zip file contains a preamble (an arbitrary data before the |
| * first entry) and 'zip -A' was not called to adjust the offsets, so all |
| * the offsets are off by the preamble size. In the 32-bit case (that is, |
| * there is no ECD64Locator+ECD64), ECD immediately follows the last CDH, |
| * ECD immediately follows the Central Directory, and contains its size, so |
| * Central Directory can be found reliably. We then use its stated location, |
| * which ECD contains, too, to calculate the preamble size. In the 64-bit |
| * case, there are ECD64 and ECD64Locator records between the end of the |
| * Central Directory and the ECD, the calculation is similar, with the |
| * exception of the logic to find the actual start of the ECD64. |
| * ECD64Locator contains only its position in the file, which is off by |
| * preamble size, but does not contain the actual size of ECD64, which in |
| * theory is variable (the fixed fields may be followed by some custom data, |
| * with the total size saved in ECD64::remaining_size and thus unavailable |
| * until we find ECD64. We assume that the custom data is missing. |
| */ |
| |
| // First, sanity checks. |
| uint32_t cen_position = ecd->cen_offset32(); |
| if (!ziph::zfield_has_ext64(cen_position)) { |
| if (!mapped_file_.mapped(mapped_file_.address(cen_position))) { |
| diag_warnx("%s:%d: %s is corrupt: Central Directory location 0x%" PRIx32 |
| " is invalid", |
| __FILE__, __LINE__, path.c_str(), cen_position); |
| mapped_file_.Close(); |
| return false; |
| } |
| if (mapped_file_.offset(ecd) < cen_position) { |
| diag_warnx("%s:%d: %s is corrupt: End of Central Directory at 0x%" PRIx64 |
| " precedes Central Directory at 0x%" PRIx32, |
| __FILE__, __LINE__, path.c_str(), mapped_file_.offset(ecd), |
| cen_position); |
| mapped_file_.Close(); |
| return false; |
| } |
| } |
| uint32_t cen_size = ecd->cen_size32(); |
| if (!ziph::zfield_has_ext64(cen_size)) { |
| if (cen_size > mapped_file_.offset(ecd)) { |
| diag_warnx("%s:%d: %s is corrupt: Central Directory size 0x%" PRIx32 |
| " is too large", |
| __FILE__, __LINE__, path.c_str(), cen_size); |
| mapped_file_.Close(); |
| return false; |
| } |
| } |
| if (cen_size == 0) { |
| // Empty archive, let cdh_ point to End of Central Directory. |
| cdh_ = reinterpret_cast<const CDH *>(ecd); |
| preamble_size_ = mapped_file_.offset(cdh_) - cen_position; |
| } else { |
| auto ecd64loc = reinterpret_cast<const ECD64Locator *>( |
| ziph::byte_ptr(ecd) - sizeof(ECD64Locator)); |
| if (ecd64loc->is()) { |
| auto ecd64 = reinterpret_cast<const ECD64 *>(ziph::byte_ptr(ecd64loc) - |
| sizeof(ECD64)); |
| if (!ecd64->is()) { |
| diag_warnx( |
| "%s:%d: %s is corrupt, expected ECD64 record at offset 0x%" PRIx64 |
| " is missing", |
| __FILE__, __LINE__, path.c_str(), mapped_file_.offset(ecd64)); |
| mapped_file_.Close(); |
| return false; |
| } |
| cdh_ = reinterpret_cast<const CDH *>(ziph::byte_ptr(ecd64) - |
| ecd64->cen_size()); |
| preamble_size_ = mapped_file_.offset(cdh_) - ecd64->cen_offset(); |
| // Find CEN and preamble size. |
| } else { |
| if (ziph::zfield_has_ext64(cen_size) || |
| ziph::zfield_has_ext64(cen_position)) { |
| diag_warnx( |
| "%s:%d: %s is corrupt, expected ECD64 locator record at " |
| "offset 0x%" PRIx64 " is missing", |
| __FILE__, __LINE__, path.c_str(), mapped_file_.offset(ecd64loc)); |
| return false; |
| } |
| cdh_ = reinterpret_cast<const CDH *>(ziph::byte_ptr(ecd) - cen_size); |
| preamble_size_ = mapped_file_.offset(cdh_) - cen_position; |
| } |
| if (!cdh_->is()) { |
| diag_warnx( |
| "%s:%d: In %s, expected central file header signature at " |
| "offset0x%" PRIx64, |
| __FILE__, __LINE__, path.c_str(), mapped_file_.offset(cdh_)); |
| mapped_file_.Close(); |
| return false; |
| } |
| } |
| path_ = path; |
| return true; |
| } |
| |
| bool InputJar::Close() { |
| mapped_file_.Close(); |
| path_.clear(); |
| return true; |
| } |
