| /* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding |
| * version for AMD64 on Windows using Microsoft C compiler |
| * |
| * Copyright (C) 1995-2003 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| * |
| * Copyright (C) 2003 Chris Anderson <christop@charm.net> |
| * Please use the copyright conditions above. |
| * |
| * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant |
| * |
| * inffas8664.c call function inffas8664fnc in inffasx64.asm |
| * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c |
| * |
| * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also |
| * slightly quicker on x86 systems because, instead of using rep movsb to copy |
| * data, it uses rep movsw, which moves data in 2-byte chunks instead of single |
| * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates |
| * from http://fedora.linux.duke.edu/fc1_x86_64 |
| * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with |
| * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, |
| * when decompressing mozilla-source-1.3.tar.gz. |
| * |
| * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from |
| * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at |
| * the moment. I have successfully compiled and tested this code with gcc2.96, |
| * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S |
| * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX |
| * enabled. I will attempt to merge the MMX code into this version. Newer |
| * versions of this and inffast.S can be found at |
| * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ |
| * |
| */ |
| |
| #include <stdio.h> |
| #include "zutil.h" |
| #include "inftrees.h" |
| #include "inflate.h" |
| #include "inffast.h" |
| |
| /* Mark Adler's comments from inffast.c: */ |
| |
| /* |
| Decode literal, length, and distance codes and write out the resulting |
| literal and match bytes until either not enough input or output is |
| available, an end-of-block is encountered, or a data error is encountered. |
| When large enough input and output buffers are supplied to inflate(), for |
| example, a 16K input buffer and a 64K output buffer, more than 95% of the |
| inflate execution time is spent in this routine. |
| |
| Entry assumptions: |
| |
| state->mode == LEN |
| strm->avail_in >= 6 |
| strm->avail_out >= 258 |
| start >= strm->avail_out |
| state->bits < 8 |
| |
| On return, state->mode is one of: |
| |
| LEN -- ran out of enough output space or enough available input |
| TYPE -- reached end of block code, inflate() to interpret next block |
| BAD -- error in block data |
| |
| Notes: |
| |
| - The maximum input bits used by a length/distance pair is 15 bits for the |
| length code, 5 bits for the length extra, 15 bits for the distance code, |
| and 13 bits for the distance extra. This totals 48 bits, or six bytes. |
| Therefore if strm->avail_in >= 6, then there is enough input to avoid |
| checking for available input while decoding. |
| |
| - The maximum bytes that a single length/distance pair can output is 258 |
| bytes, which is the maximum length that can be coded. inflate_fast() |
| requires strm->avail_out >= 258 for each loop to avoid checking for |
| output space. |
| */ |
| |
| |
| |
| typedef struct inffast_ar { |
| /* 64 32 x86 x86_64 */ |
| /* ar offset register */ |
| /* 0 0 */ void *esp; /* esp save */ |
| /* 8 4 */ void *ebp; /* ebp save */ |
| /* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ |
| /* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ |
| /* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ |
| /* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ |
| /* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ |
| /* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ |
| /* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ |
| /* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ |
| /* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */ |
| /* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ |
| /* 92 48 */ unsigned wsize; /* window size */ |
| /* 96 52 */ unsigned write; /* window write index */ |
| /*100 56 */ unsigned lmask; /* r12 mask for lcode */ |
| /*104 60 */ unsigned dmask; /* r13 mask for dcode */ |
| /*108 64 */ unsigned len; /* r14 match length */ |
| /*112 68 */ unsigned dist; /* r15 match distance */ |
| /*116 72 */ unsigned status; /* set when state chng*/ |
| } type_ar; |
| #ifdef ASMINF |
| |
| void inflate_fast(strm, start) |
| z_streamp strm; |
| unsigned start; /* inflate()'s starting value for strm->avail_out */ |
| { |
| struct inflate_state FAR *state; |
| type_ar ar; |
| void inffas8664fnc(struct inffast_ar * par); |
| |
| |
| |
| #if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64)) |
| #define PAD_AVAIL_IN 6 |
| #define PAD_AVAIL_OUT 258 |
| #else |
| #define PAD_AVAIL_IN 5 |
| #define PAD_AVAIL_OUT 257 |
| #endif |
| |
| /* copy state to local variables */ |
| state = (struct inflate_state FAR *)strm->state; |
| |
| ar.in = strm->next_in; |
| ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); |
| ar.out = strm->next_out; |
| ar.beg = ar.out - (start - strm->avail_out); |
| ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); |
| ar.wsize = state->wsize; |
| ar.write = state->wnext; |
| ar.window = state->window; |
| ar.hold = state->hold; |
| ar.bits = state->bits; |
| ar.lcode = state->lencode; |
| ar.dcode = state->distcode; |
| ar.lmask = (1U << state->lenbits) - 1; |
| ar.dmask = (1U << state->distbits) - 1; |
| |
| /* decode literals and length/distances until end-of-block or not enough |
| input data or output space */ |
| |
| /* align in on 1/2 hold size boundary */ |
| while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { |
| ar.hold += (unsigned long)*ar.in++ << ar.bits; |
| ar.bits += 8; |
| } |
| |
| inffas8664fnc(&ar); |
| |
| if (ar.status > 1) { |
| if (ar.status == 2) |
| strm->msg = "invalid literal/length code"; |
| else if (ar.status == 3) |
| strm->msg = "invalid distance code"; |
| else |
| strm->msg = "invalid distance too far back"; |
| state->mode = BAD; |
| } |
| else if ( ar.status == 1 ) { |
| state->mode = TYPE; |
| } |
| |
| /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ |
| ar.len = ar.bits >> 3; |
| ar.in -= ar.len; |
| ar.bits -= ar.len << 3; |
| ar.hold &= (1U << ar.bits) - 1; |
| |
| /* update state and return */ |
| strm->next_in = ar.in; |
| strm->next_out = ar.out; |
| strm->avail_in = (unsigned)(ar.in < ar.last ? |
| PAD_AVAIL_IN + (ar.last - ar.in) : |
| PAD_AVAIL_IN - (ar.in - ar.last)); |
| strm->avail_out = (unsigned)(ar.out < ar.end ? |
| PAD_AVAIL_OUT + (ar.end - ar.out) : |
| PAD_AVAIL_OUT - (ar.out - ar.end)); |
| state->hold = (unsigned long)ar.hold; |
| state->bits = ar.bits; |
| return; |
| } |
| |
| #endif |
