| // Copyright 2016 The Bazel Authors. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| /** |
| * This is PID 1 inside the sandbox environment and runs in a separate user, |
| * mount, UTS, IPC and PID namespace. |
| */ |
| |
| #include "src/main/tools/linux-sandbox-pid1.h" |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <grp.h> |
| #include <libgen.h> |
| #include <math.h> |
| #include <mntent.h> |
| #include <net/if.h> |
| #include <pwd.h> |
| #include <signal.h> |
| #include <stdarg.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/mount.h> |
| #include <sys/prctl.h> |
| #include <sys/stat.h> |
| #include <sys/syscall.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <unistd.h> |
| |
| #include <string> |
| #include <unordered_set> |
| |
| #ifndef MS_REC |
| // Some systems do not define MS_REC in sys/mount.h. We might be able to grab it |
| // from linux/fs.h instead (cf. #2667). |
| #include <linux/fs.h> |
| #endif |
| |
| #ifndef TEMP_FAILURE_RETRY |
| // Some C standard libraries like musl do not define this macro, so we'll |
| // include our own version for compatibility. |
| #define TEMP_FAILURE_RETRY(exp) \ |
| ({ \ |
| decltype(exp) _rc; \ |
| do { \ |
| _rc = (exp); \ |
| } while (_rc == -1 && errno == EINTR); \ |
| _rc; \ |
| }) |
| #endif // TEMP_FAILURE_RETRY |
| |
| #include "src/main/tools/linux-sandbox-options.h" |
| #include "src/main/tools/linux-sandbox.h" |
| #include "src/main/tools/logging.h" |
| #include "src/main/tools/process-tools.h" |
| |
| static void WriteFile(const std::string &filename, const char *fmt, ...) { |
| FILE *stream = fopen(filename.c_str(), "w"); |
| if (stream == nullptr) { |
| DIE("fopen(%s)", filename.c_str()); |
| } |
| |
| va_list ap; |
| va_start(ap, fmt); |
| int r = vfprintf(stream, fmt, ap); |
| va_end(ap); |
| |
| if (r < 0) { |
| DIE("vfprintf"); |
| } |
| |
| if (fclose(stream) != 0) { |
| DIE("fclose(%s)", filename.c_str()); |
| } |
| } |
| |
| static int global_child_pid; |
| |
| // Helper methods |
| static void CreateFile(const char *path) { |
| int handle = open(path, O_CREAT | O_WRONLY | O_EXCL, 0666); |
| if (handle < 0) { |
| DIE("open"); |
| } |
| if (close(handle) < 0) { |
| DIE("close"); |
| } |
| } |
| |
| // Creates an empty file at 'path' by hard linking it from a known empty file. |
| // This is over two times faster than creating empty files via open() on |
| // certain filesystems (e.g. XFS). |
| static void LinkFile(const char *path) { |
| if (link("tmp/empty_file", path) < 0) { |
| DIE("link %s", path); |
| } |
| } |
| |
| // Recursively creates the file or directory specified in "path" and its parent |
| // directories. |
| // Return -1 on failure and sets errno to: |
| // EINVAL path is null |
| // ENOTDIR path exists and is not a directory |
| // EEXIST path exists and is a directory |
| // ENOENT stat call with the path failed |
| static int CreateTarget(const char *path, bool is_directory) { |
| if (path == NULL) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| struct stat sb; |
| // If the path already exists... |
| |
| if (stat(path, &sb) == 0) { |
| if (is_directory && S_ISDIR(sb.st_mode)) { |
| // and it's a directory and supposed to be a directory, we're done here. |
| return 0; |
| } else if (!is_directory && S_ISREG(sb.st_mode)) { |
| // and it's a regular file and supposed to be one, we're done here. |
| return 0; |
| } else { |
| // otherwise something is really wrong. |
| errno = is_directory ? ENOTDIR : EEXIST; |
| return -1; |
| } |
| } else { |
| // If stat failed because of any error other than "the path does not exist", |
| // this is an error. |
| if (errno != ENOENT) { |
| return -1; |
| } |
| } |
| |
| // Create the parent directory. |
| { |
| char *buf, *dir; |
| |
| if (!(buf = strdup(path))) DIE("strdup"); |
| |
| dir = dirname(buf); |
| if (CreateTarget(dir, true) < 0) { |
| DIE("CreateTarget %s", dir); |
| } |
| |
| free(buf); |
| } |
| |
| if (is_directory) { |
| if (mkdir(path, 0755) < 0) { |
| DIE("mkdir"); |
| } |
| } else { |
| LinkFile(path); |
| } |
| |
| return 0; |
| } |
| |
| static void SetupSelfDestruction(int *sync_pipe) { |
| // We could also poll() on the pipe fd to find out when the parent goes away, |
| // and rely on SIGCHLD interrupting that otherwise. That might require us to |
| // install some trivial handler for SIGCHLD. Using O_ASYNC to turn the pipe |
| // close into SIGIO may also work. Another option is signalfd, although that's |
| // almost as obscure as this prctl. |
| if (prctl(PR_SET_PDEATHSIG, SIGKILL) < 0) { |
| DIE("prctl"); |
| } |
| |
| // Switch to a new process group, otherwise our process group will still refer |
| // to the outer PID namespace. We might then accidentally kill our parent by a |
| // call to e.g. `kill(0, sig)`. |
| if (setpgid(0, 0) < 0) { |
| DIE("setpgid"); |
| } |
| |
| // Verify that the parent still lives. |
| char buf = 0; |
| if (close(sync_pipe[0]) < 0) { |
| DIE("close"); |
| } |
| if (write(sync_pipe[1], &buf, 1) < 0) { |
| DIE("write"); |
| } |
| if (close(sync_pipe[1]) < 0) { |
| DIE("close"); |
| } |
| } |
| |
| static void SetupMountNamespace() { |
| // Fully isolate our mount namespace private from outside events, so that |
| // mounts in the outside environment do not affect our sandbox. |
| if (mount(nullptr, "/", nullptr, MS_REC | MS_PRIVATE, nullptr) < 0) { |
| DIE("mount"); |
| } |
| } |
| |
| static void SetupUserNamespace() { |
| // Disable needs for CAP_SETGID. |
| struct stat sb; |
| if (stat("/proc/self/setgroups", &sb) == 0) { |
| WriteFile("/proc/self/setgroups", "deny"); |
| } else { |
| // Ignore ENOENT, because older Linux versions do not have this file (but |
| // also do not require writing to it). |
| if (errno != ENOENT) { |
| DIE("stat(/proc/self/setgroups"); |
| } |
| } |
| |
| uid_t inner_uid; |
| gid_t inner_gid; |
| if (opt.fake_root) { |
| // Change our username to 'root'. |
| inner_uid = 0; |
| inner_gid = 0; |
| } else if (opt.fake_username) { |
| // Change our username to 'nobody'. |
| struct passwd *pwd = getpwnam("nobody"); |
| if (pwd == nullptr) { |
| DIE("unable to find passwd entry for user nobody") |
| } |
| |
| inner_uid = pwd->pw_uid; |
| inner_gid = pwd->pw_gid; |
| } else { |
| // Do not change the username inside the sandbox. |
| inner_uid = global_outer_uid; |
| inner_gid = global_outer_gid; |
| } |
| if (opt.enable_pty) { |
| // Change the group to "tty" regardless of what was previously set |
| struct group grp; |
| char buf[256]; |
| size_t buflen = sizeof(buf); |
| struct group *result; |
| getgrnam_r("tty", &grp, buf, buflen, &result); |
| if (result == nullptr) { |
| DIE("getgrnam_r"); |
| } |
| inner_gid = grp.gr_gid; |
| } |
| |
| WriteFile("/proc/self/uid_map", "%u %u 1\n", inner_uid, global_outer_uid); |
| WriteFile("/proc/self/gid_map", "%u %u 1\n", inner_gid, global_outer_gid); |
| } |
| |
| static void SetupUtsNamespace() { |
| if (sethostname("localhost", 9) < 0) { |
| DIE("sethostname"); |
| } |
| |
| if (setdomainname("localdomain", 11) < 0) { |
| DIE("setdomainname"); |
| } |
| } |
| |
| static void MountFilesystems() { |
| for (const std::string &tmpfs_dir : opt.tmpfs_dirs) { |
| PRINT_DEBUG("tmpfs: %s", tmpfs_dir.c_str()); |
| if (mount("tmpfs", tmpfs_dir.c_str(), "tmpfs", |
| MS_NOSUID | MS_NODEV | MS_NOATIME, nullptr) < 0) { |
| DIE("mount(tmpfs, %s, tmpfs, MS_NOSUID | MS_NODEV | MS_NOATIME, nullptr)", |
| tmpfs_dir.c_str()); |
| } |
| } |
| |
| // Make sure that our working directory is a mount point. The easiest way to |
| // do this is by bind-mounting it upon itself. |
| PRINT_DEBUG("working dir: %s", opt.working_dir.c_str()); |
| |
| // An attempt to mount the sandbox in tmpfs will always fail, so this block is |
| // slightly redundant with the next mount() check, but dumping the mount() |
| // syscall is incredibly cryptic, so we explicitly check against and warn |
| // about attempts to use tmpfs. |
| for (const std::string &tmpfs_dir : opt.tmpfs_dirs) { |
| if (opt.working_dir.find(tmpfs_dir) == 0) { |
| DIE("The sandbox working directory cannot be below a path where we mount " |
| "tmpfs (you requested mounting %s in %s). Is your --output_base= " |
| "below one of your --sandbox_tmpfs_path values?", |
| opt.working_dir.c_str(), tmpfs_dir.c_str()); |
| } |
| } |
| |
| if (mount(opt.working_dir.c_str(), opt.working_dir.c_str(), nullptr, MS_BIND, |
| nullptr) < 0) { |
| DIE("mount(%s, %s, nullptr, MS_BIND, nullptr)", opt.working_dir.c_str(), |
| opt.working_dir.c_str()); |
| } |
| |
| std::unordered_set<std::string> bind_mount_sources; |
| |
| for (size_t i = 0; i < opt.bind_mount_sources.size(); i++) { |
| const std::string &source = opt.bind_mount_sources.at(i); |
| bind_mount_sources.insert(source); |
| const std::string &target = opt.bind_mount_targets.at(i); |
| PRINT_DEBUG("bind mount: %s -> %s", source.c_str(), target.c_str()); |
| if (mount(source.c_str(), target.c_str(), nullptr, MS_BIND, nullptr) < 0) { |
| DIE("mount(%s, %s, nullptr, MS_BIND, nullptr)", source.c_str(), |
| target.c_str()); |
| } |
| } |
| |
| for (const std::string &writable_file : opt.writable_files) { |
| PRINT_DEBUG("writable: %s", writable_file.c_str()); |
| if (bind_mount_sources.find(writable_file) != bind_mount_sources.end()) { |
| // Bind mount sources contained in writable_files will be kept writable in |
| // MakeFileSystemMostlyReadOnly, but have already been mounted at this |
| // point. |
| continue; |
| } |
| if (mount(writable_file.c_str(), writable_file.c_str(), nullptr, |
| MS_BIND | MS_REC, nullptr) < 0) { |
| DIE("mount(%s, %s, nullptr, MS_BIND | MS_REC, nullptr)", |
| writable_file.c_str(), writable_file.c_str()); |
| } |
| } |
| } |
| |
| // We later remount everything read-only, except the paths for which this method |
| // returns true. |
| static bool ShouldBeWritable(const std::string &mnt_dir) { |
| if (mnt_dir == opt.working_dir) { |
| return true; |
| } |
| |
| if (opt.enable_pty && mnt_dir == "/dev/pts") { |
| return true; |
| } |
| |
| for (const std::string &writable_file : opt.writable_files) { |
| if (mnt_dir == writable_file) { |
| return true; |
| } |
| } |
| |
| for (const std::string &tmpfs_dir : opt.tmpfs_dirs) { |
| if (mnt_dir == tmpfs_dir) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| // Makes the whole filesystem read-only, except for the paths for which |
| // ShouldBeWritable returns true. |
| static void MakeFilesystemMostlyReadOnly() { |
| FILE *mounts = setmntent("/proc/self/mounts", "r"); |
| if (mounts == nullptr) { |
| DIE("setmntent"); |
| } |
| |
| struct mntent *ent; |
| while ((ent = getmntent(mounts)) != nullptr) { |
| int mountFlags = MS_BIND | MS_REMOUNT; |
| |
| // MS_REMOUNT does not allow us to change certain flags. This means, we have |
| // to first read them out and then pass them in back again. There seems to |
| // be no better way than this (an API for just getting the mount flags of a |
| // mount entry as a bitmask would be great). |
| if (hasmntopt(ent, "nodev") != nullptr) { |
| mountFlags |= MS_NODEV; |
| } |
| if (hasmntopt(ent, "noexec") != nullptr) { |
| mountFlags |= MS_NOEXEC; |
| } |
| if (hasmntopt(ent, "nosuid") != nullptr) { |
| mountFlags |= MS_NOSUID; |
| } |
| if (hasmntopt(ent, "noatime") != nullptr) { |
| mountFlags |= MS_NOATIME; |
| } |
| if (hasmntopt(ent, "nodiratime") != nullptr) { |
| mountFlags |= MS_NODIRATIME; |
| } |
| if (hasmntopt(ent, "relatime") != nullptr) { |
| mountFlags |= MS_RELATIME; |
| } |
| |
| if (!ShouldBeWritable(ent->mnt_dir)) { |
| mountFlags |= MS_RDONLY; |
| } |
| |
| PRINT_DEBUG("remount %s: %s", (mountFlags & MS_RDONLY) ? "ro" : "rw", |
| ent->mnt_dir); |
| if (mount(nullptr, ent->mnt_dir, nullptr, mountFlags, nullptr) < 0) { |
| // If we get EACCES or EPERM, this might be a mount-point for which we |
| // don't have read access. Not much we can do about this, but it also |
| // won't do any harm, so let's go on. The same goes for EINVAL or ENOENT, |
| // which are fired in case a later mount overlaps an earlier mount, e.g. |
| // consider the case of /proc, /proc/sys/fs/binfmt_misc and /proc, with |
| // the latter /proc being the one that an outer sandbox has mounted on |
| // top of its parent /proc. In that case, we're not allowed to remount |
| // /proc/sys/fs/binfmt_misc, because it is hidden. If we get ESTALE, the |
| // mount is a broken NFS mount. In the ideal case, the user would either |
| // fix or remove that mount, but in cases where that's not possible, we |
| // should just ignore it. Similarly, one can get ENODEV in case of |
| // autofs/automount failure. |
| switch (errno) { |
| case EACCES: |
| case EPERM: |
| case EINVAL: |
| case ENOENT: |
| case ESTALE: |
| case ENODEV: |
| PRINT_DEBUG( |
| "remount(nullptr, %s, nullptr, %d, nullptr) failure (%m) ignored", |
| ent->mnt_dir, mountFlags); |
| break; |
| default: |
| DIE("remount(nullptr, %s, nullptr, %d, nullptr)", ent->mnt_dir, |
| mountFlags); |
| } |
| } |
| } |
| |
| endmntent(mounts); |
| } |
| |
| static void MountProc() { |
| // Mount a new proc on top of the old one, because the old one still refers to |
| // our parent PID namespace. |
| if (mount("/proc", "/proc", "proc", MS_NODEV | MS_NOEXEC | MS_NOSUID, |
| nullptr) < 0) { |
| DIE("mount"); |
| } |
| } |
| |
| static void SetupNetworking() { |
| // When running in a separate network namespace, enable the loopback interface |
| // because some application may want to use it. |
| if (opt.create_netns) { |
| int fd; |
| fd = socket(AF_INET, SOCK_DGRAM, 0); |
| if (fd < 0) { |
| DIE("socket"); |
| } |
| |
| struct ifreq ifr = {}; |
| strncpy(ifr.ifr_name, "lo", IF_NAMESIZE); |
| |
| // Verify that name is valid. |
| if (if_nametoindex(ifr.ifr_name) == 0) { |
| DIE("if_nametoindex"); |
| } |
| |
| // Enable the interface. |
| ifr.ifr_flags |= IFF_UP; |
| if (ioctl(fd, SIOCSIFFLAGS, &ifr) < 0) { |
| DIE("ioctl"); |
| } |
| |
| if (close(fd) < 0) { |
| DIE("close"); |
| } |
| } |
| } |
| |
| static void EnterWorkingDirectory() { |
| std::string path = opt.working_dir; |
| if (opt.hermetic) { |
| path = path.substr(opt.sandbox_root.size() + 1); |
| } |
| |
| if (chdir(path.c_str()) < 0) { |
| DIE("chdir(%s)", path.c_str()); |
| } |
| } |
| |
| static void ForwardSignal(int signum) { |
| kill(-global_child_pid, signum); |
| } |
| |
| static void SpawnChild() { |
| PRINT_DEBUG("calling fork..."); |
| global_child_pid = fork(); |
| |
| if (global_child_pid < 0) { |
| DIE("fork()"); |
| } else if (global_child_pid == 0) { |
| // Put the child into its own process group. |
| if (setpgid(0, 0) < 0) { |
| DIE("setpgid"); |
| } |
| |
| // Try to assign our terminal to the child process. |
| if (tcsetpgrp(STDIN_FILENO, getpgrp()) < 0 && errno != ENOTTY) { |
| DIE("tcsetpgrp"); |
| } |
| |
| // Unblock all signals, restore default handlers. |
| ClearSignalMask(); |
| |
| // Force umask to include read and execute for everyone, to make output |
| // permissions predictable. |
| umask(022); |
| |
| // argv[] passed to execve() must be a null-terminated array. |
| opt.args.push_back(nullptr); |
| |
| if (execvp(opt.args[0], opt.args.data()) < 0) { |
| DIE("execvp(%s, %p)", opt.args[0], opt.args.data()); |
| } |
| } else { |
| PRINT_DEBUG("child started with PID %d", global_child_pid); |
| } |
| } |
| |
| static int WaitForChild() { |
| while (true) { |
| // Wait for some process to exit. This includes reparented processes in our |
| // PID namespace. |
| int status; |
| const pid_t pid = TEMP_FAILURE_RETRY(wait(&status)); |
| |
| if (pid < 0) { |
| // We don't expect any errors besides EINTR. In particular, ECHILD should |
| // be impossible because we haven't yet seen global_child_pid exit. |
| DIE("wait"); |
| } |
| |
| PRINT_DEBUG("wait returned pid=%d, status=0x%02x", pid, status); |
| |
| // If this isn't our child's PID, there's nothing further to do; we've |
| // successfully reaped a zombie. |
| if (pid != global_child_pid) { |
| continue; |
| } |
| |
| // If the child exited due to a signal, log that fact and exit with the same |
| // status. |
| if (WIFSIGNALED(status)) { |
| const int signal = WTERMSIG(status); |
| PRINT_DEBUG("child exited due to signal %d", WTERMSIG(status)); |
| return 128 + signal; |
| } |
| |
| // Otherwise it must have exited normally. |
| const int exit_code = WEXITSTATUS(status); |
| PRINT_DEBUG("child exited normally with code %d", exit_code); |
| return exit_code; |
| } |
| } |
| |
| static void MountSandboxAndGoThere() { |
| if (mount(opt.sandbox_root.c_str(), opt.sandbox_root.c_str(), nullptr, |
| MS_BIND | MS_NOSUID, nullptr) < 0) { |
| DIE("mount"); |
| } |
| if (chdir(opt.sandbox_root.c_str()) < 0) { |
| DIE("chdir(%s)", opt.sandbox_root.c_str()); |
| } |
| } |
| |
| static void CreateEmptyFile() { |
| // This is used as the base for bind mounting. |
| if (CreateTarget("tmp", true) < 0) { |
| DIE("CreateTarget tmp") |
| } |
| CreateFile("tmp/empty_file"); |
| } |
| |
| static void MountDev() { |
| if (CreateTarget("dev", true) < 0) { |
| DIE("CreateTarget /dev"); |
| } |
| const char *devs[] = {"/dev/null", "/dev/random", "/dev/urandom", "/dev/zero", |
| NULL}; |
| for (int i = 0; devs[i] != NULL; i++) { |
| LinkFile(devs[i] + 1); |
| if (mount(devs[i], devs[i] + 1, NULL, MS_BIND, NULL) < 0) { |
| DIE("mount"); |
| } |
| } |
| if (symlink("/proc/self/fd", "dev/fd") < 0) { |
| DIE("symlink"); |
| } |
| } |
| |
| static void MountAllMounts() { |
| for (const std::string &tmpfs_dir : opt.tmpfs_dirs) { |
| PRINT_DEBUG("tmpfs: %s", tmpfs_dir.c_str()); |
| if (mount("tmpfs", tmpfs_dir.c_str(), "tmpfs", |
| MS_NOSUID | MS_NODEV | MS_NOATIME, nullptr) < 0) { |
| DIE("mount(tmpfs, %s, tmpfs, MS_NOSUID | MS_NODEV | MS_NOATIME, nullptr)", |
| tmpfs_dir.c_str()); |
| } |
| } |
| |
| // Make sure that our working directory is a mount point. The easiest way to |
| // do this is by bind-mounting it upon itself. |
| if (mount(opt.working_dir.c_str(), opt.working_dir.c_str(), nullptr, MS_BIND, |
| nullptr) < 0) { |
| DIE("mount(%s, %s, nullptr, MS_BIND, nullptr)", opt.working_dir.c_str(), |
| opt.working_dir.c_str()); |
| } |
| for (int i = 0; i < (signed)opt.bind_mount_sources.size(); i++) { |
| if (opt.debug) { |
| if (strcmp(opt.bind_mount_sources[i].c_str(), |
| opt.bind_mount_targets[i].c_str()) == 0) { |
| // The file is mounted to the same path inside the sandbox, as outside |
| // (e.g. /home/user -> <sandbox>/home/user), so we'll just show a |
| // simplified version of the mount command. |
| PRINT_DEBUG("mount: %s\n", opt.bind_mount_sources[i].c_str()); |
| } else { |
| // The file is mounted to a custom location inside the sandbox. |
| // Create a user-friendly string for the sandboxed path and show it. |
| const std::string user_friendly_mount_target("<sandbox>" + |
| opt.bind_mount_targets[i]); |
| PRINT_DEBUG("mount: %s -> %s\n", opt.bind_mount_sources[i].c_str(), |
| user_friendly_mount_target.c_str()); |
| } |
| } |
| const std::string full_sandbox_path(opt.sandbox_root + |
| opt.bind_mount_targets[i]); |
| |
| struct stat sb; |
| if (stat(opt.bind_mount_sources[i].c_str(), &sb) < 0) { |
| DIE("stat"); |
| } |
| bool IsDirectory = S_ISDIR(sb.st_mode); |
| if (CreateTarget(full_sandbox_path.c_str(), IsDirectory) < 0) { |
| DIE("CreateTarget %s", full_sandbox_path.c_str()); |
| } |
| int result = |
| mount(opt.bind_mount_sources[i].c_str(), full_sandbox_path.c_str(), |
| NULL, MS_REC | MS_BIND | MS_RDONLY, NULL); |
| if (result != 0) { |
| DIE("mount"); |
| } |
| } |
| for (const std::string &writable_file : opt.writable_files) { |
| PRINT_DEBUG("writable: %s", writable_file.c_str()); |
| if (mount(writable_file.c_str(), writable_file.c_str(), nullptr, |
| MS_BIND | MS_REC, nullptr) < 0) { |
| DIE("mount(%s, %s, nullptr, MS_BIND | MS_REC, nullptr)", |
| writable_file.c_str(), writable_file.c_str()); |
| } |
| } |
| } |
| |
| static void ChangeRoot() { |
| // move the real root to old_root, then detach it |
| char old_root[16] = "old-root-XXXXXX"; |
| if (mkdtemp(old_root) == NULL) { |
| perror("mkdtemp"); |
| DIE("mkdtemp returned NULL\n"); |
| } |
| // pivot_root has no wrapper in libc, so we need syscall() |
| if (syscall(SYS_pivot_root, ".", old_root) < 0) { |
| DIE("syscall"); |
| } |
| if (chroot(".") < 0) { |
| DIE("chroot"); |
| } |
| if (umount2(old_root, MNT_DETACH) < 0) { |
| DIE("umount2"); |
| } |
| if (rmdir(old_root) < 0) { |
| DIE("rmdir"); |
| } |
| } |
| |
| int Pid1Main(void *sync_pipe_param) { |
| PRINT_DEBUG("Pid1Main started"); |
| |
| if (getpid() != 1) { |
| DIE("Using PID namespaces, but we are not PID 1"); |
| } |
| |
| // Start with default signal handlers and an empty signal mask. |
| ClearSignalMask(); |
| |
| SetupSelfDestruction(reinterpret_cast<int *>(sync_pipe_param)); |
| |
| // Sandbox ourselves. |
| SetupMountNamespace(); |
| SetupUserNamespace(); |
| if (opt.fake_hostname) { |
| SetupUtsNamespace(); |
| } |
| |
| if (opt.hermetic) { |
| MountSandboxAndGoThere(); |
| CreateEmptyFile(); |
| MountDev(); |
| MountProc(); |
| MountAllMounts(); |
| ChangeRoot(); |
| } else { |
| MountFilesystems(); |
| MakeFilesystemMostlyReadOnly(); |
| MountProc(); |
| } |
| SetupNetworking(); |
| EnterWorkingDirectory(); |
| |
| // Ignore terminal signals; we hand off the terminal to the child in |
| // SpawnChild below. |
| IgnoreSignal(SIGTTIN); |
| IgnoreSignal(SIGTTOU); |
| |
| // Fork the child process. |
| SpawnChild(); |
| |
| // Forward requests to shut down gracefully to the child. |
| InstallSignalHandler(SIGTERM, ForwardSignal); |
| |
| // Note that there's no need to kill any remaining descendant processes; they |
| // are in our PID namespace and the kernel will send them SIGKILL |
| // automatically once we exit. |
| return WaitForChild(); |
| } |