| # Copyright 2015 The Bazel Authors. All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """Rules for manipulation of various packaging.""" |
| |
| load(":path.bzl", "compute_data_path", "dest_path") |
| load("//tools/config:common_settings.bzl", "BuildSettingInfo") |
| |
| # Filetype to restrict inputs |
| tar_filetype = [".tar", ".tar.gz", ".tgz", ".tar.xz", ".tar.bz2"] |
| deb_filetype = [".deb", ".udeb"] |
| |
| def _remap(remap_paths, path): |
| """If path starts with a key in remap_paths, rewrite it.""" |
| for prefix, replacement in remap_paths.items(): |
| if path.startswith(prefix): |
| return replacement + path[len(prefix):] |
| return path |
| |
| def _quote(filename, protect = "="): |
| """Quote the filename, by escaping = by \\= and \\ by \\\\""" |
| return filename.replace("\\", "\\\\").replace(protect, "\\" + protect) |
| |
| def _pkg_tar_impl(ctx): |
| """Implementation of the pkg_tar rule.""" |
| |
| if ctx.attr._no_build_defs_pkg_flag[BuildSettingInfo].value: |
| fail("The built-in version of pkg_deb has been removed. Please use" + |
| " https://github.com/bazelbuild/rules_pkg/blob/master/pkg.") |
| |
| # Compute the relative path |
| data_path = compute_data_path(ctx.outputs.out, ctx.attr.strip_prefix) |
| |
| # Find a list of path remappings to apply. |
| remap_paths = ctx.attr.remap_paths |
| |
| # Start building the arguments. |
| args = [ |
| "--output=" + ctx.outputs.out.path, |
| "--directory=" + ctx.attr.package_dir, |
| "--mode=" + ctx.attr.mode, |
| "--owner=" + ctx.attr.owner, |
| "--owner_name=" + ctx.attr.ownername, |
| ] |
| if ctx.attr.mtime != -1: # Note: Must match default in rule def. |
| if ctx.attr.portable_mtime: |
| fail("You may not set both mtime and portable_mtime") |
| args.append("--mtime=%d" % ctx.attr.mtime) |
| if ctx.attr.portable_mtime: |
| args.append("--mtime=portable") |
| |
| # Add runfiles if requested |
| file_inputs = [] |
| if ctx.attr.include_runfiles: |
| runfiles_depsets = [] |
| for f in ctx.attr.srcs: |
| default_runfiles = f[DefaultInfo].default_runfiles |
| if default_runfiles != None: |
| runfiles_depsets.append(default_runfiles.files) |
| |
| # deduplicates files in srcs attribute and their runfiles |
| file_inputs = depset(ctx.files.srcs, transitive = runfiles_depsets).to_list() |
| else: |
| file_inputs = ctx.files.srcs[:] |
| |
| args += [ |
| "--file=%s=%s" % (_quote(f.path), _remap(remap_paths, dest_path(f, data_path))) |
| for f in file_inputs |
| ] |
| for target, f_dest_path in ctx.attr.files.items(): |
| target_files = target.files.to_list() |
| if len(target_files) != 1: |
| fail("Each input must describe exactly one file.", attr = "files") |
| file_inputs += target_files |
| args += ["--file=%s=%s" % (_quote(target_files[0].path), f_dest_path)] |
| if ctx.attr.modes: |
| args += [ |
| "--modes=%s=%s" % (_quote(key), ctx.attr.modes[key]) |
| for key in ctx.attr.modes |
| ] |
| if ctx.attr.owners: |
| args += [ |
| "--owners=%s=%s" % (_quote(key), ctx.attr.owners[key]) |
| for key in ctx.attr.owners |
| ] |
| if ctx.attr.ownernames: |
| args += [ |
| "--owner_names=%s=%s" % (_quote(key), ctx.attr.ownernames[key]) |
| for key in ctx.attr.ownernames |
| ] |
| if ctx.attr.empty_files: |
| args += ["--empty_file=%s" % empty_file for empty_file in ctx.attr.empty_files] |
| if ctx.attr.empty_dirs: |
| args += ["--empty_dir=%s" % empty_dir for empty_dir in ctx.attr.empty_dirs] |
| if ctx.attr.extension: |
| dotPos = ctx.attr.extension.find(".") |
| if dotPos > 0: |
| dotPos += 1 |
| args += ["--compression=%s" % ctx.attr.extension[dotPos:]] |
| elif ctx.attr.extension == "tgz": |
| args += ["--compression=gz"] |
| args += ["--tar=" + f.path for f in ctx.files.deps] |
| args += [ |
| "--link=%s:%s" % (_quote(k, protect = ":"), ctx.attr.symlinks[k]) |
| for k in ctx.attr.symlinks |
| ] |
| arg_file = ctx.actions.declare_file(ctx.label.name + ".args") |
| ctx.actions.write(arg_file, "\n".join(args)) |
| |
| ctx.actions.run( |
| inputs = file_inputs + ctx.files.deps + [arg_file], |
| executable = ctx.executable.build_tar, |
| arguments = ["--flagfile", arg_file.path], |
| outputs = [ctx.outputs.out], |
| mnemonic = "PackageTar", |
| use_default_shell_env = True, |
| ) |
| |
| def _pkg_deb_impl(ctx): |
| """The implementation for the pkg_deb rule.""" |
| |
| if ctx.attr._no_build_defs_pkg_flag[BuildSettingInfo].value: |
| fail("The built-in version of pkg_deb has been removed. Please use" + |
| " https://github.com/bazelbuild/rules_pkg/blob/master/pkg.") |
| |
| files = [ctx.file.data] |
| args = [ |
| "--output=" + ctx.outputs.deb.path, |
| "--changes=" + ctx.outputs.changes.path, |
| "--data=" + ctx.file.data.path, |
| "--package=" + ctx.attr.package, |
| "--architecture=" + ctx.attr.architecture, |
| "--maintainer=" + ctx.attr.maintainer, |
| ] |
| if ctx.attr.preinst: |
| args += ["--preinst=@" + ctx.file.preinst.path] |
| files += [ctx.file.preinst] |
| if ctx.attr.postinst: |
| args += ["--postinst=@" + ctx.file.postinst.path] |
| files += [ctx.file.postinst] |
| if ctx.attr.prerm: |
| args += ["--prerm=@" + ctx.file.prerm.path] |
| files += [ctx.file.prerm] |
| if ctx.attr.postrm: |
| args += ["--postrm=@" + ctx.file.postrm.path] |
| files += [ctx.file.postrm] |
| if ctx.attr.config: |
| args += ["--config=@" + ctx.file.config.path] |
| files += [ctx.file.config] |
| if ctx.attr.templates: |
| args += ["--templates=@" + ctx.file.templates.path] |
| files += [ctx.file.templates] |
| |
| # Conffiles can be specified by a file or a string list |
| if ctx.attr.conffiles_file: |
| if ctx.attr.conffiles: |
| fail("Both conffiles and conffiles_file attributes were specified") |
| args += ["--conffile=@" + ctx.file.conffiles_file.path] |
| files += [ctx.file.conffiles_file] |
| elif ctx.attr.conffiles: |
| args += ["--conffile=%s" % cf for cf in ctx.attr.conffiles] |
| |
| # Version and description can be specified by a file or inlined |
| if ctx.attr.version_file: |
| if ctx.attr.version: |
| fail("Both version and version_file attributes were specified") |
| args += ["--version=@" + ctx.file.version_file.path] |
| files += [ctx.file.version_file] |
| elif ctx.attr.version: |
| args += ["--version=" + ctx.attr.version] |
| else: |
| fail("Neither version_file nor version attribute was specified") |
| |
| if ctx.attr.description_file: |
| if ctx.attr.description: |
| fail("Both description and description_file attributes were specified") |
| args += ["--description=@" + ctx.file.description_file.path] |
| files += [ctx.file.description_file] |
| elif ctx.attr.description: |
| args += ["--description=" + ctx.attr.description] |
| else: |
| fail("Neither description_file nor description attribute was specified") |
| |
| # Built using can also be specified by a file or inlined (but is not mandatory) |
| if ctx.attr.built_using_file: |
| if ctx.attr.built_using: |
| fail("Both build_using and built_using_file attributes were specified") |
| args += ["--built_using=@" + ctx.file.built_using_file.path] |
| files += [ctx.file.built_using_file] |
| elif ctx.attr.built_using: |
| args += ["--built_using=" + ctx.attr.built_using] |
| |
| if ctx.attr.depends_file: |
| if ctx.attr.depends: |
| fail("Both depends and depends_file attributes were specified") |
| args += ["--depends=@" + ctx.file.depends_file.path] |
| files += [ctx.file.depends_file] |
| elif ctx.attr.depends: |
| args += ["--depends=" + d for d in ctx.attr.depends] |
| |
| if ctx.attr.priority: |
| args += ["--priority=" + ctx.attr.priority] |
| if ctx.attr.section: |
| args += ["--section=" + ctx.attr.section] |
| if ctx.attr.homepage: |
| args += ["--homepage=" + ctx.attr.homepage] |
| |
| args += ["--distribution=" + ctx.attr.distribution] |
| args += ["--urgency=" + ctx.attr.urgency] |
| args += ["--suggests=" + d for d in ctx.attr.suggests] |
| args += ["--enhances=" + d for d in ctx.attr.enhances] |
| args += ["--conflicts=" + d for d in ctx.attr.conflicts] |
| args += ["--pre_depends=" + d for d in ctx.attr.predepends] |
| args += ["--recommends=" + d for d in ctx.attr.recommends] |
| |
| ctx.actions.run( |
| executable = ctx.executable.make_deb, |
| arguments = args, |
| inputs = files, |
| outputs = [ctx.outputs.deb, ctx.outputs.changes], |
| mnemonic = "MakeDeb", |
| ) |
| ctx.actions.run_shell( |
| command = "ln -s %s %s" % (ctx.outputs.deb.basename, ctx.outputs.out.path), |
| inputs = [ctx.outputs.deb], |
| outputs = [ctx.outputs.out], |
| ) |
| output_groups = {"out": [ctx.outputs.out]} |
| if hasattr(ctx.outputs, "deb"): |
| output_groups["deb"] = [ctx.outputs.deb] |
| if hasattr(ctx.outputs, "changes"): |
| output_groups["changes"] = [ctx.outputs.changes] |
| return OutputGroupInfo(**output_groups) |
| |
| # A rule for creating a tar file, see README.md |
| _real_pkg_tar = rule( |
| implementation = _pkg_tar_impl, |
| attrs = { |
| "strip_prefix": attr.string(), |
| "package_dir": attr.string(default = "/"), |
| "deps": attr.label_list(allow_files = tar_filetype), |
| "srcs": attr.label_list(allow_files = True), |
| "files": attr.label_keyed_string_dict(allow_files = True), |
| "mode": attr.string(default = "0555"), |
| "modes": attr.string_dict(), |
| "mtime": attr.int(default = -1), |
| "portable_mtime": attr.bool(default = True), |
| "out": attr.output(), |
| "owner": attr.string(default = "0.0"), |
| "ownername": attr.string(default = "."), |
| "owners": attr.string_dict(), |
| "ownernames": attr.string_dict(), |
| "extension": attr.string(default = "tar"), |
| "symlinks": attr.string_dict(), |
| "empty_files": attr.string_list(), |
| "include_runfiles": attr.bool(), |
| "empty_dirs": attr.string_list(), |
| "remap_paths": attr.string_dict(), |
| # Implicit dependencies. |
| "build_tar": attr.label( |
| default = Label("//tools/build_defs/pkg:build_tar"), |
| cfg = "host", |
| executable = True, |
| allow_files = True, |
| ), |
| "_no_build_defs_pkg_flag": attr.label( |
| default = "//tools/build_defs/pkg:incompatible_no_build_defs_pkg", |
| ), |
| }, |
| ) |
| |
| def pkg_tar(**kwargs): |
| # Compatibility with older versions of pkg_tar that define files as |
| # a flat list of labels. |
| if "srcs" not in kwargs: |
| if "files" in kwargs: |
| if not hasattr(kwargs["files"], "items"): |
| label = "%s//%s:%s" % (native.repository_name(), native.package_name(), kwargs["name"]) |
| print("%s: you provided a non dictionary to the pkg_tar `files` attribute. " % (label,) + |
| "This attribute was renamed to `srcs`. " + |
| "Consider renaming it in your BUILD file.") |
| kwargs["srcs"] = kwargs.pop("files") |
| extension = kwargs.get("extension") or "tar" |
| _real_pkg_tar( |
| out = kwargs["name"] + "." + extension, |
| **kwargs |
| ) |
| |
| # A rule for creating a deb file, see README.md |
| _pkg_deb = rule( |
| implementation = _pkg_deb_impl, |
| attrs = { |
| "data": attr.label(mandatory = True, allow_single_file = tar_filetype), |
| "package": attr.string(mandatory = True), |
| "architecture": attr.string(default = "all"), |
| "distribution": attr.string(default = "unstable"), |
| "urgency": attr.string(default = "medium"), |
| "maintainer": attr.string(mandatory = True), |
| "preinst": attr.label(allow_single_file = True), |
| "postinst": attr.label(allow_single_file = True), |
| "prerm": attr.label(allow_single_file = True), |
| "postrm": attr.label(allow_single_file = True), |
| "config": attr.label(allow_single_file = True), |
| "templates": attr.label(allow_single_file = True), |
| "conffiles_file": attr.label(allow_single_file = True), |
| "conffiles": attr.string_list(default = []), |
| "version_file": attr.label(allow_single_file = True), |
| "version": attr.string(), |
| "description_file": attr.label(allow_single_file = True), |
| "description": attr.string(), |
| "built_using_file": attr.label(allow_single_file = True), |
| "built_using": attr.string(), |
| "priority": attr.string(), |
| "section": attr.string(), |
| "homepage": attr.string(), |
| "depends": attr.string_list(default = []), |
| "depends_file": attr.label(allow_single_file = True), |
| "suggests": attr.string_list(default = []), |
| "enhances": attr.string_list(default = []), |
| "conflicts": attr.string_list(default = []), |
| "predepends": attr.string_list(default = []), |
| "recommends": attr.string_list(default = []), |
| # Implicit dependencies. |
| "make_deb": attr.label( |
| default = Label("//tools/build_defs/pkg:make_deb"), |
| cfg = "exec", |
| executable = True, |
| allow_files = True, |
| ), |
| # Outputs. |
| "out": attr.output(mandatory = True), |
| "deb": attr.output(mandatory = True), |
| "changes": attr.output(mandatory = True), |
| "_no_build_defs_pkg_flag": attr.label( |
| default = "//tools/build_defs/pkg:incompatible_no_build_defs_pkg", |
| ), |
| }, |
| ) |
| |
| def pkg_deb(name, package, **kwargs): |
| """Creates a deb file. See README.md.""" |
| version = kwargs.get("version", "") |
| architecture = kwargs.get("architecture", "all") |
| out_deb = "%s_%s_%s.deb" % (package, version, architecture) |
| out_changes = "%s_%s_%s.changes" % (package, version, architecture) |
| _pkg_deb( |
| name = name, |
| package = package, |
| out = name + ".deb", |
| deb = out_deb, |
| changes = out_changes, |
| **kwargs |
| ) |
