blob: fe6518ad20ba4089b4de1c7e6c56531d8a0626a4 [file] [log] [blame] [edit]
// Copyright 2016 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
syntax = "proto3";
package google.bigtable.v1;
option go_package = "google.golang.org/genproto/googleapis/bigtable/v1;bigtable";
option java_multiple_files = true;
option java_outer_classname = "BigtableDataProto";
option java_package = "com.google.bigtable.v1";
// Specifies the complete (requested) contents of a single row of a table.
// Rows which exceed 256MiB in size cannot be read in full.
message Row {
// The unique key which identifies this row within its table. This is the same
// key that's used to identify the row in, for example, a MutateRowRequest.
// May contain any non-empty byte string up to 4KiB in length.
bytes key = 1;
// May be empty, but only if the entire row is empty.
// The mutual ordering of column families is not specified.
repeated Family families = 2;
}
// Specifies (some of) the contents of a single row/column family of a table.
message Family {
// The unique key which identifies this family within its row. This is the
// same key that's used to identify the family in, for example, a RowFilter
// which sets its "family_name_regex_filter" field.
// Must match [-_.a-zA-Z0-9]+, except that AggregatingRowProcessors may
// produce cells in a sentinel family with an empty name.
// Must be no greater than 64 characters in length.
string name = 1;
// Must not be empty. Sorted in order of increasing "qualifier".
repeated Column columns = 2;
}
// Specifies (some of) the contents of a single row/column of a table.
message Column {
// The unique key which identifies this column within its family. This is the
// same key that's used to identify the column in, for example, a RowFilter
// which sets its "column_qualifier_regex_filter" field.
// May contain any byte string, including the empty string, up to 16kiB in
// length.
bytes qualifier = 1;
// Must not be empty. Sorted in order of decreasing "timestamp_micros".
repeated Cell cells = 2;
}
// Specifies (some of) the contents of a single row/column/timestamp of a table.
message Cell {
// The cell's stored timestamp, which also uniquely identifies it within
// its column.
// Values are always expressed in microseconds, but individual tables may set
// a coarser "granularity" to further restrict the allowed values. For
// example, a table which specifies millisecond granularity will only allow
// values of "timestamp_micros" which are multiples of 1000.
int64 timestamp_micros = 1;
// The value stored in the cell.
// May contain any byte string, including the empty string, up to 100MiB in
// length.
bytes value = 2;
// Labels applied to the cell by a [RowFilter][google.bigtable.v1.RowFilter].
repeated string labels = 3;
}
// Specifies a contiguous range of rows.
message RowRange {
// Inclusive lower bound. If left empty, interpreted as the empty string.
bytes start_key = 2;
// Exclusive upper bound. If left empty, interpreted as infinity.
bytes end_key = 3;
}
// Specifies a non-contiguous set of rows.
message RowSet {
// Single rows included in the set.
repeated bytes row_keys = 1;
// Contiguous row ranges included in the set.
repeated RowRange row_ranges = 2;
}
// Specifies a contiguous range of columns within a single column family.
// The range spans from <column_family>:<start_qualifier> to
// <column_family>:<end_qualifier>, where both bounds can be either inclusive or
// exclusive.
message ColumnRange {
// The name of the column family within which this range falls.
string family_name = 1;
// The column qualifier at which to start the range (within 'column_family').
// If neither field is set, interpreted as the empty string, inclusive.
oneof start_qualifier {
// Used when giving an inclusive lower bound for the range.
bytes start_qualifier_inclusive = 2;
// Used when giving an exclusive lower bound for the range.
bytes start_qualifier_exclusive = 3;
}
// The column qualifier at which to end the range (within 'column_family').
// If neither field is set, interpreted as the infinite string, exclusive.
oneof end_qualifier {
// Used when giving an inclusive upper bound for the range.
bytes end_qualifier_inclusive = 4;
// Used when giving an exclusive upper bound for the range.
bytes end_qualifier_exclusive = 5;
}
}
// Specified a contiguous range of microsecond timestamps.
message TimestampRange {
// Inclusive lower bound. If left empty, interpreted as 0.
int64 start_timestamp_micros = 1;
// Exclusive upper bound. If left empty, interpreted as infinity.
int64 end_timestamp_micros = 2;
}
// Specifies a contiguous range of raw byte values.
message ValueRange {
// The value at which to start the range.
// If neither field is set, interpreted as the empty string, inclusive.
oneof start_value {
// Used when giving an inclusive lower bound for the range.
bytes start_value_inclusive = 1;
// Used when giving an exclusive lower bound for the range.
bytes start_value_exclusive = 2;
}
// The value at which to end the range.
// If neither field is set, interpreted as the infinite string, exclusive.
oneof end_value {
// Used when giving an inclusive upper bound for the range.
bytes end_value_inclusive = 3;
// Used when giving an exclusive upper bound for the range.
bytes end_value_exclusive = 4;
}
}
// Takes a row as input and produces an alternate view of the row based on
// specified rules. For example, a RowFilter might trim down a row to include
// just the cells from columns matching a given regular expression, or might
// return all the cells of a row but not their values. More complicated filters
// can be composed out of these components to express requests such as, "within
// every column of a particular family, give just the two most recent cells
// which are older than timestamp X."
//
// There are two broad categories of RowFilters (true filters and transformers),
// as well as two ways to compose simple filters into more complex ones
// (chains and interleaves). They work as follows:
//
// * True filters alter the input row by excluding some of its cells wholesale
// from the output row. An example of a true filter is the "value_regex_filter",
// which excludes cells whose values don't match the specified pattern. All
// regex true filters use RE2 syntax (https://github.com/google/re2/wiki/Syntax)
// in raw byte mode (RE2::Latin1), and are evaluated as full matches. An
// important point to keep in mind is that RE2(.) is equivalent by default to
// RE2([^\n]), meaning that it does not match newlines. When attempting to match
// an arbitrary byte, you should therefore use the escape sequence '\C', which
// may need to be further escaped as '\\C' in your client language.
//
// * Transformers alter the input row by changing the values of some of its
// cells in the output, without excluding them completely. Currently, the only
// supported transformer is the "strip_value_transformer", which replaces every
// cell's value with the empty string.
//
// * Chains and interleaves are described in more detail in the
// RowFilter.Chain and RowFilter.Interleave documentation.
//
// The total serialized size of a RowFilter message must not
// exceed 4096 bytes, and RowFilters may not be nested within each other
// (in Chains or Interleaves) to a depth of more than 20.
message RowFilter {
// A RowFilter which sends rows through several RowFilters in sequence.
message Chain {
// The elements of "filters" are chained together to process the input row:
// in row -> f(0) -> intermediate row -> f(1) -> ... -> f(N) -> out row
// The full chain is executed atomically.
repeated RowFilter filters = 1;
}
// A RowFilter which sends each row to each of several component
// RowFilters and interleaves the results.
message Interleave {
// The elements of "filters" all process a copy of the input row, and the
// results are pooled, sorted, and combined into a single output row.
// If multiple cells are produced with the same column and timestamp,
// they will all appear in the output row in an unspecified mutual order.
// Consider the following example, with three filters:
//
// input row
// |
// -----------------------------------------------------
// | | |
// f(0) f(1) f(2)
// | | |
// 1: foo,bar,10,x foo,bar,10,z far,bar,7,a
// 2: foo,blah,11,z far,blah,5,x far,blah,5,x
// | | |
// -----------------------------------------------------
// |
// 1: foo,bar,10,z // could have switched with #2
// 2: foo,bar,10,x // could have switched with #1
// 3: foo,blah,11,z
// 4: far,bar,7,a
// 5: far,blah,5,x // identical to #6
// 6: far,blah,5,x // identical to #5
// All interleaved filters are executed atomically.
repeated RowFilter filters = 1;
}
// A RowFilter which evaluates one of two possible RowFilters, depending on
// whether or not a predicate RowFilter outputs any cells from the input row.
//
// IMPORTANT NOTE: The predicate filter does not execute atomically with the
// true and false filters, which may lead to inconsistent or unexpected
// results. Additionally, Condition filters have poor performance, especially
// when filters are set for the false condition.
message Condition {
// If "predicate_filter" outputs any cells, then "true_filter" will be
// evaluated on the input row. Otherwise, "false_filter" will be evaluated.
RowFilter predicate_filter = 1;
// The filter to apply to the input row if "predicate_filter" returns any
// results. If not provided, no results will be returned in the true case.
RowFilter true_filter = 2;
// The filter to apply to the input row if "predicate_filter" does not
// return any results. If not provided, no results will be returned in the
// false case.
RowFilter false_filter = 3;
}
// Which of the possible RowFilter types to apply. If none are set, this
// RowFilter returns all cells in the input row.
oneof filter {
// Applies several RowFilters to the data in sequence, progressively
// narrowing the results.
Chain chain = 1;
// Applies several RowFilters to the data in parallel and combines the
// results.
Interleave interleave = 2;
// Applies one of two possible RowFilters to the data based on the output of
// a predicate RowFilter.
Condition condition = 3;
// ADVANCED USE ONLY.
// Hook for introspection into the RowFilter. Outputs all cells directly to
// the output of the read rather than to any parent filter. Consider the
// following example:
//
// Chain(
// FamilyRegex("A"),
// Interleave(
// All(),
// Chain(Label("foo"), Sink())
// ),
// QualifierRegex("B")
// )
//
// A,A,1,w
// A,B,2,x
// B,B,4,z
// |
// FamilyRegex("A")
// |
// A,A,1,w
// A,B,2,x
// |
// +------------+-------------+
// | |
// All() Label(foo)
// | |
// A,A,1,w A,A,1,w,labels:[foo]
// A,B,2,x A,B,2,x,labels:[foo]
// | |
// | Sink() --------------+
// | | |
// +------------+ x------+ A,A,1,w,labels:[foo]
// | A,B,2,x,labels:[foo]
// A,A,1,w |
// A,B,2,x |
// | |
// QualifierRegex("B") |
// | |
// A,B,2,x |
// | |
// +--------------------------------+
// |
// A,A,1,w,labels:[foo]
// A,B,2,x,labels:[foo] // could be switched
// A,B,2,x // could be switched
//
// Despite being excluded by the qualifier filter, a copy of every cell
// that reaches the sink is present in the final result.
//
// As with an [Interleave][google.bigtable.v1.RowFilter.Interleave],
// duplicate cells are possible, and appear in an unspecified mutual order.
// In this case we have a duplicate with column "A:B" and timestamp 2,
// because one copy passed through the all filter while the other was
// passed through the label and sink. Note that one copy has label "foo",
// while the other does not.
//
// Cannot be used within the `predicate_filter`, `true_filter`, or
// `false_filter` of a [Condition][google.bigtable.v1.RowFilter.Condition].
bool sink = 16;
// Matches all cells, regardless of input. Functionally equivalent to
// leaving `filter` unset, but included for completeness.
bool pass_all_filter = 17;
// Does not match any cells, regardless of input. Useful for temporarily
// disabling just part of a filter.
bool block_all_filter = 18;
// Matches only cells from rows whose keys satisfy the given RE2 regex. In
// other words, passes through the entire row when the key matches, and
// otherwise produces an empty row.
// Note that, since row keys can contain arbitrary bytes, the '\C' escape
// sequence must be used if a true wildcard is desired. The '.' character
// will not match the new line character '\n', which may be present in a
// binary key.
bytes row_key_regex_filter = 4;
// Matches all cells from a row with probability p, and matches no cells
// from the row with probability 1-p.
double row_sample_filter = 14;
// Matches only cells from columns whose families satisfy the given RE2
// regex. For technical reasons, the regex must not contain the ':'
// character, even if it is not being used as a literal.
// Note that, since column families cannot contain the new line character
// '\n', it is sufficient to use '.' as a full wildcard when matching
// column family names.
string family_name_regex_filter = 5;
// Matches only cells from columns whose qualifiers satisfy the given RE2
// regex.
// Note that, since column qualifiers can contain arbitrary bytes, the '\C'
// escape sequence must be used if a true wildcard is desired. The '.'
// character will not match the new line character '\n', which may be
// present in a binary qualifier.
bytes column_qualifier_regex_filter = 6;
// Matches only cells from columns within the given range.
ColumnRange column_range_filter = 7;
// Matches only cells with timestamps within the given range.
TimestampRange timestamp_range_filter = 8;
// Matches only cells with values that satisfy the given regular expression.
// Note that, since cell values can contain arbitrary bytes, the '\C' escape
// sequence must be used if a true wildcard is desired. The '.' character
// will not match the new line character '\n', which may be present in a
// binary value.
bytes value_regex_filter = 9;
// Matches only cells with values that fall within the given range.
ValueRange value_range_filter = 15;
// Skips the first N cells of each row, matching all subsequent cells.
// If duplicate cells are present, as is possible when using an Interleave,
// each copy of the cell is counted separately.
int32 cells_per_row_offset_filter = 10;
// Matches only the first N cells of each row.
// If duplicate cells are present, as is possible when using an Interleave,
// each copy of the cell is counted separately.
int32 cells_per_row_limit_filter = 11;
// Matches only the most recent N cells within each column. For example,
// if N=2, this filter would match column "foo:bar" at timestamps 10 and 9,
// skip all earlier cells in "foo:bar", and then begin matching again in
// column "foo:bar2".
// If duplicate cells are present, as is possible when using an Interleave,
// each copy of the cell is counted separately.
int32 cells_per_column_limit_filter = 12;
// Replaces each cell's value with the empty string.
bool strip_value_transformer = 13;
// Applies the given label to all cells in the output row. This allows
// the client to determine which results were produced from which part of
// the filter.
//
// Values must be at most 15 characters in length, and match the RE2
// pattern [a-z0-9\\-]+
//
// Due to a technical limitation, it is not currently possible to apply
// multiple labels to a cell. As a result, a Chain may have no more than
// one sub-filter which contains a apply_label_transformer. It is okay for
// an Interleave to contain multiple apply_label_transformers, as they will
// be applied to separate copies of the input. This may be relaxed in the
// future.
string apply_label_transformer = 19;
}
}
// Specifies a particular change to be made to the contents of a row.
message Mutation {
// A Mutation which sets the value of the specified cell.
message SetCell {
// The name of the family into which new data should be written.
// Must match [-_.a-zA-Z0-9]+
string family_name = 1;
// The qualifier of the column into which new data should be written.
// Can be any byte string, including the empty string.
bytes column_qualifier = 2;
// The timestamp of the cell into which new data should be written.
// Use -1 for current Bigtable server time.
// Otherwise, the client should set this value itself, noting that the
// default value is a timestamp of zero if the field is left unspecified.
// Values must match the "granularity" of the table (e.g. micros, millis).
int64 timestamp_micros = 3;
// The value to be written into the specified cell.
bytes value = 4;
}
// A Mutation which deletes cells from the specified column, optionally
// restricting the deletions to a given timestamp range.
message DeleteFromColumn {
// The name of the family from which cells should be deleted.
// Must match [-_.a-zA-Z0-9]+
string family_name = 1;
// The qualifier of the column from which cells should be deleted.
// Can be any byte string, including the empty string.
bytes column_qualifier = 2;
// The range of timestamps within which cells should be deleted.
TimestampRange time_range = 3;
}
// A Mutation which deletes all cells from the specified column family.
message DeleteFromFamily {
// The name of the family from which cells should be deleted.
// Must match [-_.a-zA-Z0-9]+
string family_name = 1;
}
// A Mutation which deletes all cells from the containing row.
message DeleteFromRow {
}
// Which of the possible Mutation types to apply.
oneof mutation {
// Set a cell's value.
SetCell set_cell = 1;
// Deletes cells from a column.
DeleteFromColumn delete_from_column = 2;
// Deletes cells from a column family.
DeleteFromFamily delete_from_family = 3;
// Deletes cells from the entire row.
DeleteFromRow delete_from_row = 4;
}
}
// Specifies an atomic read/modify/write operation on the latest value of the
// specified column.
message ReadModifyWriteRule {
// The name of the family to which the read/modify/write should be applied.
// Must match [-_.a-zA-Z0-9]+
string family_name = 1;
// The qualifier of the column to which the read/modify/write should be
// applied.
// Can be any byte string, including the empty string.
bytes column_qualifier = 2;
// The rule used to determine the column's new latest value from its current
// latest value.
oneof rule {
// Rule specifying that "append_value" be appended to the existing value.
// If the targeted cell is unset, it will be treated as containing the
// empty string.
bytes append_value = 3;
// Rule specifying that "increment_amount" be added to the existing value.
// If the targeted cell is unset, it will be treated as containing a zero.
// Otherwise, the targeted cell must contain an 8-byte value (interpreted
// as a 64-bit big-endian signed integer), or the entire request will fail.
int64 increment_amount = 4;
}
}