| // Copyright 2015 The Bazel Authors. All rights reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "src/main/tools/process-tools.h" | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <math.h> | |
| #include <signal.h> | |
| #include <stdarg.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/resource.h> | |
| #include <sys/stat.h> | |
| #include <sys/time.h> | |
| #include <sys/types.h> | |
| #include <sys/wait.h> | |
| #include <unistd.h> | |
| #include <memory> | |
| #include "src/main/protobuf/execution_statistics.pb.h" | |
| #include "src/main/tools/logging.h" | |
| static volatile sig_atomic_t child_pid_for_signal = 0; | |
| int SwitchToEuid() { | |
| int uid = getuid(); | |
| int euid = geteuid(); | |
| if (uid != euid) { | |
| if (setreuid(euid, euid) < 0) { | |
| DIE("setreuid"); | |
| } | |
| } | |
| return euid; | |
| } | |
| int SwitchToEgid() { | |
| int gid = getgid(); | |
| int egid = getegid(); | |
| if (gid != egid) { | |
| if (setregid(egid, egid) < 0) { | |
| DIE("setregid"); | |
| } | |
| } | |
| return egid; | |
| } | |
| void Redirect(const std::string &target_path, int fd) { | |
| if (!target_path.empty() && target_path != "-") { | |
| const int flags = O_WRONLY | O_CREAT | O_TRUNC | O_APPEND; | |
| int fd_out = open(target_path.c_str(), flags, 0666); | |
| if (fd_out < 0) { | |
| DIE("open(%s)", target_path.c_str()); | |
| } | |
| // If we were launched with less than 3 fds (stdin, stdout, stderr) open, | |
| // but redirection is still requested via a command-line flag, something is | |
| // wacky and the following code would not do what we intend to do, so let's | |
| // bail. | |
| if (fd_out < 3) { | |
| DIE("open(%s) returned a handle that is reserved for stdin / stdout / " | |
| "stderr", | |
| target_path.c_str()); | |
| } | |
| if (dup2(fd_out, fd) < 0) { | |
| DIE("dup2"); | |
| } | |
| if (close(fd_out) < 0) { | |
| DIE("close"); | |
| } | |
| } | |
| } | |
| static void ForciblyKillEverything(int signo) { | |
| // We don't update the last_signal field tracked in process-wrapper-legacy.cc, | |
| // which is used to report the signal back to the user, because we want to | |
| // know (from the caller side) the original signal that caused us to stop. | |
| kill(-child_pid_for_signal, SIGKILL); | |
| } | |
| void KillEverything(pid_t pgrp, bool gracefully, double graceful_kill_delay) { | |
| if (gracefully) { | |
| // TODO(jmmv): If we truly want to offer graceful termination, we should | |
| // probably only send SIGTERM to the process group leader and allow it to | |
| // decide what to do. Terminating its subprocesses out of its control might | |
| // not have the right effect. | |
| kill(-pgrp, SIGTERM); | |
| // Previous versions of this code used to loop testing if the process had | |
| // already died by sending it a 0 signal... but that loop would never | |
| // terminate early because sending a signal to a zombie process succeeds | |
| // (and we cannot collect the child's exit status here). | |
| child_pid_for_signal = pgrp; | |
| InstallSignalHandler(SIGALRM, ForciblyKillEverything); | |
| SetTimeout(graceful_kill_delay); | |
| } else { | |
| kill(-pgrp, SIGKILL); | |
| } | |
| } | |
| void InstallSignalHandler(int signum, void (*handler)(int)) { | |
| struct sigaction sa = {}; | |
| sa.sa_handler = handler; | |
| if (handler == SIG_IGN || handler == SIG_DFL) { | |
| // No point in blocking signals when using the default handler or ignoring | |
| // the signal. | |
| if (sigemptyset(&sa.sa_mask) < 0) { | |
| DIE("sigemptyset"); | |
| } | |
| } else { | |
| // When using a custom handler, block all signals from firing while the | |
| // handler is running. | |
| if (sigfillset(&sa.sa_mask) < 0) { | |
| DIE("sigfillset"); | |
| } | |
| } | |
| // sigaction may fail for certain reserved signals. Ignore failure in this | |
| // case, but report it in debug mode, just in case. | |
| if (sigaction(signum, &sa, nullptr) < 0) { | |
| PRINT_DEBUG("sigaction(%d, &sa, nullptr) failed", signum); | |
| } | |
| } | |
| void IgnoreSignal(int signum) { | |
| // These signals can't be handled, so we'll just not do anything for these. | |
| if (signum != SIGSTOP && signum != SIGKILL) { | |
| InstallSignalHandler(signum, SIG_IGN); | |
| } | |
| } | |
| void InstallDefaultSignalHandler(int signum) { | |
| // These signals can't be handled, so we'll just not do anything for these. | |
| if (signum != SIGSTOP && signum != SIGKILL) { | |
| InstallSignalHandler(signum, SIG_DFL); | |
| } | |
| } | |
| void ClearSignalMask() { | |
| // Use an empty signal mask for the process. | |
| sigset_t empty_sset; | |
| if (sigemptyset(&empty_sset) < 0) { | |
| DIE("sigemptyset"); | |
| } | |
| if (sigprocmask(SIG_SETMASK, &empty_sset, nullptr) < 0) { | |
| DIE("sigprocmask"); | |
| } | |
| // Set the default signal handler for all signals. | |
| for (int i = 1; i < NSIG; ++i) { | |
| if (i == SIGKILL || i == SIGSTOP) { | |
| continue; | |
| } | |
| struct sigaction sa = {}; | |
| sa.sa_handler = SIG_DFL; | |
| if (sigemptyset(&sa.sa_mask) < 0) { | |
| DIE("sigemptyset"); | |
| } | |
| // Ignore possible errors, because we might not be allowed to set the | |
| // handler for certain signals, but we still want to try. | |
| sigaction(i, &sa, nullptr); | |
| } | |
| } | |
| void SetTimeout(double timeout_secs) { | |
| double int_val, fraction_val; | |
| fraction_val = modf(timeout_secs, &int_val); | |
| struct itimerval timer; | |
| timer.it_interval.tv_sec = 0; | |
| timer.it_interval.tv_usec = 0; | |
| timer.it_value.tv_sec = static_cast<time_t>(int_val), | |
| timer.it_value.tv_usec = static_cast<suseconds_t>(fraction_val * 1e6); | |
| if (setitimer(ITIMER_REAL, &timer, nullptr) < 0) { | |
| DIE("setitimer"); | |
| } | |
| } | |
| int WaitChild(pid_t pid, bool child_subreaper_enabled) { | |
| int err, status; | |
| if (child_subreaper_enabled) { | |
| // Discard any zombies that we may get when the child subreaper feature is | |
| // enabled. | |
| do { | |
| err = wait(&status); | |
| } while (err != pid || (err == -1 && errno == EINTR)); | |
| } else { | |
| do { | |
| err = waitpid(pid, &status, 0); | |
| } while (err == -1 && errno == EINTR); | |
| } | |
| if (err == -1) { | |
| DIE("waitpid"); | |
| } | |
| return status; | |
| } | |
| int WaitChildWithRusage(pid_t pid, struct rusage *rusage, | |
| bool child_subreaper_enabled) { | |
| int err, status; | |
| if (child_subreaper_enabled) { | |
| // Discard any zombies that we may get when the child subreaper feature is | |
| // enabled. | |
| do { | |
| err = wait3(&status, 0, rusage); | |
| } while (err != pid || (err == -1 && errno == EINTR)); | |
| } else { | |
| do { | |
| err = wait4(pid, &status, 0, rusage); | |
| } while (err == -1 && errno == EINTR); | |
| } | |
| if (err == -1) { | |
| DIE("wait4"); | |
| } | |
| return status; | |
| } | |
| static std::unique_ptr<tools::protos::ExecutionStatistics> | |
| CreateExecutionStatisticsProto(struct rusage *rusage) { | |
| std::unique_ptr<tools::protos::ExecutionStatistics> execution_statistics( | |
| new tools::protos::ExecutionStatistics); | |
| tools::protos::ResourceUsage *resource_usage = | |
| execution_statistics->mutable_resource_usage(); | |
| resource_usage->set_utime_sec(rusage->ru_utime.tv_sec); | |
| resource_usage->set_utime_usec(rusage->ru_utime.tv_usec); | |
| resource_usage->set_stime_sec(rusage->ru_stime.tv_sec); | |
| resource_usage->set_stime_usec(rusage->ru_stime.tv_usec); | |
| resource_usage->set_maxrss(rusage->ru_maxrss); | |
| resource_usage->set_ixrss(rusage->ru_ixrss); | |
| resource_usage->set_idrss(rusage->ru_idrss); | |
| resource_usage->set_isrss(rusage->ru_isrss); | |
| resource_usage->set_minflt(rusage->ru_minflt); | |
| resource_usage->set_majflt(rusage->ru_majflt); | |
| resource_usage->set_nswap(rusage->ru_nswap); | |
| resource_usage->set_inblock(rusage->ru_inblock); | |
| resource_usage->set_oublock(rusage->ru_oublock); | |
| resource_usage->set_msgsnd(rusage->ru_msgsnd); | |
| resource_usage->set_msgrcv(rusage->ru_msgrcv); | |
| resource_usage->set_nsignals(rusage->ru_nsignals); | |
| resource_usage->set_nvcsw(rusage->ru_nvcsw); | |
| resource_usage->set_nivcsw(rusage->ru_nivcsw); | |
| return execution_statistics; | |
| } | |
| // Write execution statistics (e.g. resource usage) to a file. | |
| void WriteStatsToFile(struct rusage *rusage, const std::string &stats_path) { | |
| const int flags = O_WRONLY | O_CREAT | O_TRUNC | O_APPEND; | |
| int fd_out = open(stats_path.c_str(), flags, 0666); | |
| if (fd_out < 0) { | |
| DIE("open(%s)", stats_path.c_str()); | |
| } | |
| std::unique_ptr<tools::protos::ExecutionStatistics> execution_statistics = | |
| CreateExecutionStatisticsProto(rusage); | |
| std::string serialized = execution_statistics->SerializeAsString(); | |
| if (serialized.empty()) { | |
| DIE("invalid execution statistics message"); | |
| } | |
| const char *remaining = serialized.c_str(); | |
| ssize_t remaining_size = serialized.size(); | |
| while (remaining_size > 0) { | |
| ssize_t written = write(fd_out, remaining, remaining_size); | |
| if (written < 0 && errno != EINTR && errno != EAGAIN) { | |
| DIE("could not write resource usage to file '%s': %s", | |
| stats_path.c_str(), strerror(errno)); | |
| } | |
| remaining_size -= written; | |
| remaining += written; | |
| } | |
| close(fd_out); | |
| } | |
| // Write contents to a file. | |
| void WriteFile(const std::string &filename, const char *fmt, ...) { | |
| FILE *stream = fopen(filename.c_str(), "w"); | |
| if (stream == nullptr) { | |
| DIE("fopen(%s)", filename.c_str()); | |
| } | |
| va_list ap; | |
| va_start(ap, fmt); | |
| int r = vfprintf(stream, fmt, ap); | |
| va_end(ap); | |
| if (r < 0) { | |
| DIE("vfprintf"); | |
| } | |
| if (fclose(stream) != 0) { | |
| DIE("fclose(%s)", filename.c_str()); | |
| } | |
| } | |
| // Waits for a signal to proceed from the pipe. | |
| void WaitPipe(int *pipe) { | |
| char buf = 0; | |
| // Close the writer fd of this process as it should only be written to by the | |
| // writer of the other process. | |
| if (close(pipe[1]) < 0) { | |
| DIE("close"); | |
| } | |
| if (read(pipe[0], &buf, 1) < 0) { | |
| DIE("read"); | |
| } | |
| if (close(pipe[0]) < 0) { | |
| DIE("close"); | |
| } | |
| } | |
| // Sends a signal to the pipe for the other waiting process proceed. | |
| void SignalPipe(int *pipe) { | |
| char buf = 0; | |
| // Close the reader fd of this process as it should only be read by the reader | |
| // of the other process. | |
| if (close(pipe[0]) < 0) { | |
| DIE("close"); | |
| } | |
| if (write(pipe[1], &buf, 1) < 0) { | |
| DIE("write"); | |
| } | |
| if (close(pipe[1]) < 0) { | |
| DIE("close"); | |
| } | |
| } |